Fracture as a wear mechanism of ceramics based on a partially stabilized zirconia during dry friction against steel
Source abstract
Abstract
The results of wear of four ceramic materials made of a partially stabilized zirconia (Y-TZP, YPCZ, Ce-TZP and Mg-PSZ) during friction against steel without lubrication are presented. It is shown that wear of ceramics from Y-TZP, Y-PSZ, and Ce-TZP occurs in two stages: first it’s a tear fracture and then it’s a shear fracture. The ceramics based on Mg-PSZ wears out by only the mechanism of shear fracture. Proceeding from the analysis, it was concluded that the wear mechanism of the ceramics under study depends on the grain boundary strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Savchenko, N.L. and Kul’kov, S.N., Surface wear structures and mechanisms in zirconia-based ceramics, Tech. Phys. Lett., 2004, vol. 30, no. 8, pp. 654–656.10.1134/1.1792303 ↗
2. Savchenko, N.L., Korolev, P.V., Tarasov, S.Yu., and Kul’kov, S.N., Structural changes of the friction surface and wear resistance of a ZrO2-Y2O3 ceramic, Tech. Phys. Lett., 2000, vol. 26, no. 6, pp. 461–463.10.1134/1.1262877 ↗
3. Akimov, G.Ya., Marinin, G.A., Chaika, E.V., and Varyukhin, V.N., Effect of the grain size on the formation of a nanophase structure and tribological properties of the friction surface of a ceramic made of partly stabilized zirconia, Tech. Phys., 2007, vol. 52, no. 10, pp. 1362–1365.10.1134/S1063784207100180 ↗
4. Akimov, G.Ya., Chaika, E.V., and Marinin, G.A., Wear and fracture toughness of partially stabilized zirconia ceramics under dry friction against steel, J. Frict. Wear, 2009, vol. 30, no. 2, pp. 77–79.10.3103/S1068366609020019 ↗
5. Akimov, G.Ya., Chaika, E.V., Timchenko, V.M., Marinin, G.A., and Burkhavetskii, V.V., Wear of ceramics based on magnesia-and ceria-stabilized zirconia in dry friction against steel, J. Frict. Wear, 2009, vol. 30, p.373.10.3103/S1068366609050122 ↗
6. Akimov, G.Ya. and Chaika, E.V., Influence of velocity on wear of zirconia ceramics during steel friction without lubrication, Ogneupory Tekh. Keram., 2010, nos. 7–8, pp. 40–42.
7. Basua, B., Vleugelsb, J., and van der Biestb, O., Microstructure-toughness-wear relationship of tetragonal zirconia ceramics, J. Eur. Ceram. Soc., 2004, vol. 24, pp. 2031–2040.10.1016/S0955-2219(03)00355-8 ↗
8. Savchenko, N.L., Transformational-reinforced ceramic and metal composites for use in a high-speed friction processes, Doctoral (Tech.) Dissertation, Tomsk, 2015.
9. Hannink, R.H.J, Stringer, R.K. and Swain, M.V., The development of zirconia transformation toughened ceramics in Australia, J. Austral. Ceram. Soc., 2014, vol. 50, no. 1, pp. 1–14.