journal article·2015-07

Friction of high-entropy Fe25Cr20Ni20Mn15Co10Al10 alloy for 65G steel

V. F. Gorban’, M. V. Karpets, Ye. S. Makarenkoa, A. D. Kostenko, N. I. Danylenko

Journal of Friction and Wear· Volume 36· Issue 4
Publisher page

Abstract

The tribotechnical characteristics of Fe25Cr20Ni20Mn15Co10Al10 high-entropy alloy paired with 65G steel on the air without grease were investigated. Friction took place in the range of speeds of 6–12 m/s and pressures of 0.5 and 1 MPa. Research of the friction characteristics without grease was also carried out at 0.07 m/s. It was determined that the coefficient of the wear rate of the high-entropy alloy varies from 6 × 10−10 to 2 × 10−9 kg/m3 during counterface wear from 5.5 × 10−8 to 2.2 × 10−9 kg/m3. It has been shown that the deformation of shear friction led to the formation of thermally stable nanostructures with size of grains about 30–70 nm in the surface layer of secondary structures. Hardness of secondary structures is increased by 20–30% both in high-entropy alloy and the material of the counterbody.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Kragel’skii, I.V., Dobychin, M.N., and Kambalov, V.M., Osnovy raschetov na trenie i iznos, (Foundations of Calculations on Friction and Wear), Moscow: Mashinostroenie, 1977.
2. Yeh, J.W., Chen, Y.L., Lin, S.J., and Chen, S.K., Highentropy alloys—a new era of exploitation, Mater. Sci. Forum, 2007, Vol. 560, pp. 1–9.10.4028/www.scientific.net/MSF.560.1 ↗
3. Kao, S.W., Yeh, J.W., and Chin, T.S., Rapidly solidified structure of alloys with up to eight equal-molar elements?a simulation by molecular dynamics, J. Phys., 2008, Vol. 20, pp. 1–7.
4. Firstov, S.A., Gorban’, V.F., Krapivka, N.A., Pechkovskii, E.P., Danilenko, N.I., and Karpets, M.V., Mechanical properties of cast multicomponent alloys at high temperature, in Sovremennye problemy fizicheskogo materialovedeniya. Sbornik, (Contemporary Problems of Physical Material Science. Col. Papers), 2008, no. 17, pp. 126–139.
5. Kostetskaya, N.B., Mechanisms of deformation and destruction of friction surface at tribooxidizing processes, Sverkhtv. Mater., 1986, no. 1, pp. 48–54.
6. Gorskii, V.V., Formation of Me–Me’–O alloys doped by oxygen in the contact zone of metals at friction, Phys. Met. Metallogr., 1989, Vol. 10, pp. 452–460.
7. Gorban’, V.F., Britun, V.F., and Kossko, I.L., Changes caused in the composition and structure of flamesprayed chromium coatings by friction due to contact interaction, Poroshk. Metall., 1995, Vol. 34, nos. 05–06, p. 299.
8. Firstov, S.A., Gorban’, V.F., Krapivka, N.A., and Pechkovskii, E.P., New class of materials–High-entropy alloys and coatings, Vestn. Tambov. Gos. Univ., 2013, Vol. 18, pp. 1938–1940.
9. Firstov, S.A., Gorban’, V.F., and Pechkovskii, E.P., Novaya metodologiya obrabotki i analiza rezul’tatov avtomaticheskogo indentirovaniya materialov (New Methodology of Treatment and Analysis of Automatic Material Identification Results), Kiev: Logos, 2009.
10. Firstov, S.A., Gorban’, V.F., Krapivka, N.A., and Pechkovskii, E.P., Distribution of elements in cast multicomponent highentropy single-phase alloys with bcc lattice, Kompozit. Nanomater., 2012, no. 3, pp. 48–65.