Effect of wear debris on antifriction and antiwear properties of industrial oils I-20A and I-40A in friction of steel surfaces
Source abstract
Abstract
The effect of wear debris on the antifriction and antiwear properties of industrial oils I-20A and I-40A in boundary sliding of steel against steel is studied. Variations in the tribological characteristics, including the friction coefficient, linear and energy wear rates, carrying capacity, and others, are studied during running-in and friction of run-in contacts. Among the specified concentrations of wear debris, the concentration of 0.8–1.0 mg/ml is found to be inadmissible and requires oil replacement. The temperature dependences of the friction coefficient for run-in contacts are obtained. It is shown that in all cases the properties of oil I-40A surpass those of oil I-20A.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Osnovy tribologii (trenie, iznos, smazka) (Fundamentals of Tribology (Friction, Wear, Lubrication)), Chichinadze, A.V., Ed., Moscow: Tsentr “Nauka tekhnika”, 2001.
2. Reshchikov, V.F., Trenie i iznos tyazhelonagruzhennykh peredach (Friction and Wear in Heavy-Loaded Transmissions), Moscow: Mashinostroenie, 1975.
3. GOST 27674-88. Friction, Wear and Lubrication. Terms and Definitions.
4. Vinogradov, G.V. and Podol’skii, Yu.Ya., Mekhanizm protivoiznosnogo i antifriktsionnogo deistviya smazochnykh sredstv pri tyazhelom rezhime granichnogo treniya (Mechanism of Antiwear and Antifriction Action of Lubricating Means at Heavy Regime of Boundary Friction), Minsk: Nauka i Tekhnika, 1969.
5. Petrusevich, A.I., Role of Hydrodynamic Oil Film in Endurance and Durability of Contact Surfaces of Machine Parts, Vestn. Mashinostr., 1963, no. 1, pp. 4–5.
6. Reshchikov, V.F. and Drozdov, Yu.N., Study of Oil Film State in Heavy-Loaded Contact, in Dinamika i prochnost’ mekhanicheskikh system (Dynamics and Strength of Mechanical Systems), Perm: Permskii Politekhn. Inst., 1970, no. 82.
7. GOST 20799-88. Industrial Oils. Technical Conditions.
8. Tochil’nikov, D.G. and Ginzburg, B.M., Methodology of Express Tribotechnical Testings of Antifriction Polymers, Vopr. Materialoved., 2002, vol. 31, no. 3, pp. 39–48.
9. Trenie, Iznos i Smazka: Spravochnik. Kn. 1 (Friction, Wear and Lubrication: Handbook. Vol. 1.), Kragel’skii, I.V. and Alisin, V.V., Eds., Moscow: Mashinostroenie, 1978.
10. Ginzburg, B.M., Kozyrev, Yu.P., Tochil’nikov, D.G., and Bulatov, V.P., About Transition from Intensive to Tempered Wear upon Friction of Solids, Pis’ma Zh. Tech. Fiz., 1995, vol. 21, no. 1, pp. 41–45.
11. Ginzburg, B.M., Tochil’nikov, D.G., Lyashkov, A.I., et al., Poly-p-Phenyl Sulfide as the Material for Oil-Lubricated Sliding Bearings, Trenie Iznos, 2010, vol. 31, no. 4, pp. 394–402 [J. Friction Wear (Engl. Transl.), 2018, vol. 31, no. 4, pp. 294–300].
12. Gupta, B.K. and Bhushan, B., Fullerene Particles as an Additive to Liquid Lubricants and Greases for Low Friction and Wear, Lubr. Eng., 1994, no. 7, pp. 524–528.
13. Ginzburg, B.M., Budtov, V.P., Kireenko, O.F., et al., Thermal and Tribological Properties of Fullerene-Contained Composite Systems, in Sb. tr. In-ta problem mashinovedeniya RAN “Problemy mashinovedeniya” (Problems of Engineering Science. Collection of Articles), Bulatov, V.P., Ed., St. Petersburg: Nauka, 2005, pp. 189–222.
14. Ginzburg, B.M., Shibaev, L.A., Kireenko, O.F., et al., Thermal Destruction of Fullerene-Contained Polymer Systems and Formation of Tribopolymer Films, Vysokomol. Soedin., Ser. A, 2005, vol. 47, no. 2, pp. 296–314.
15. Ginzburg, V.M., Kireenko, O.F., Shepelevskii, A.A., et al., Thermal and Tribological Properties of Fullerene-Containing Composite Systems. Part 2. Formation of Tribo-Polymer Films during Boundary Sliding Friction in the Presence of Fullerene C60, J. Macromol. Sci., Ser. B. Physics, 2005. vol. 44, no. 1, pp. 93–115.10.1081/MB-200044604 ↗