Thermomechanical spectrometry of friction products formed in friction of compatibilized PA-6/HDPE blend with steel
Source abstract
Abstract
Friction products (surface layers of the polymer sample, wear products, layers of polymer material transfer to the metal counterface) from the friction on steel of PA-6/HDPE blend, compatibilized HDPE with grafted methylene-butane-dione acid with the composition PA-6/(HDPE/HDPE-gr-MA-25 mass %)-20 mass % *, are studied using thermomechanical spectrometry. A considerable influence of contact load on the molecular- topological structure of these products is revealed. It is established that component redistribution takes place in the friction products, and this redistribution changes their ratio in the blend and their molecular-topological structure; in this case, none of the wear products has the structure of any of the components of the blend for the studied contact load range (1–6 MPa). It is shown that one of the following mechano-chemical processes, depending on the contact load, takes precedence in the polymer material during friction on steel: macromolecule destruction accompanied by decrease in their molecular mass, increase in molecular mass due to formation of linked and presumably copolymer structures, decrease or increase in crystallinity, and change of relaxation properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Paul, D. and Newman, S., Polymer Blends, Moscow: Mir, 1981 [in Russian].
2. Utracki, L.A., “History of Commercial Polymer Alloys and Blends (from a Perspective of the Patent Literature”), Polymer Eng. Sci., 1995, no. 35, 2–17.10.1002/pen.760350103 ↗
3. Datta, S. and Lohse, D.J., Polymeric Compatibilizers: Uses and Benefits in Polymer Blends, Munich: Hanser Pub., 1996.
4. Palabiyik, M. and Bahadur, S., “Tribological Studies of Polyamide 6 and High-Density Polyethylene Blends Filled with PTFE and Copper Oxide and Reinforced with Short Glass Fibers”, Wear, 2002, no. 253, 369–376.10.1016/S0043-1648(02)00144-8 ↗
5. Liu, C.Z., Ren, L.Q., Tong, J., et al., “Effects of Operating Parameters on the Lubricated Wear Behavior of a PA-6/UHMWPE Blend: a Statistical Analysis”, Wear, 2002, no. 253, pp. 878–884.10.1016/S0043-1648(02)00172-2 ↗
6. Palabiyik, M., and Bahadur, S., “Mechanical and Tribological Properties of Polyamide 6 and High Density Polyethylene Polyblends with and without Compatibilizer”, Wear, 2000, no. 246, pp. 149–158.10.1016/S0043-1648(00)00501-9 ↗
7. Gol’dadze, V.A., Struk, V.A., and Pesetskii, S.S., Ingibitory Iznashivaniya Metallopolimernykh Sistem (Inhibitors of Wear of Metal-Polymer Systems), Moscow: Khimiya, 1993 [in Russian].
8. Bogdanovich, S.P. and Pesetskii, S.S., “Friction Interaction of Polyamide 6/HDPE Blends with Steel”, Trenie Iznos, 2001, vol. 22, no. 5, pp. 579–586.
9. Krasnov, A.P., Pledkachevskii, Yu.M., Aderikha, V.N., et al., “Compatibility and Tribotechnical Properties of SVMPE-PA-6 Blends”, Plastich. Massy, 2001, no. 12, pp. 12–13.
10. Chen, Zh., Li, T., Yang, Y., et al., “Mechanical and Tribological Properties of PA/PPS Blends”, Wear, 2004, no. 257, pp. 696–707.10.1016/j.wear.2004.03.013 ↗
11. Liu, C.Z., Ren, L.Q., Tong, J., et al., “Statistical Wear Analysis of PA-6/UNMWPE Allow, UHMWPE and PA-6”, Wear, 2001, no. 249, pp. 31–36.10.1016/S0043-1648(00)00555-X ↗
12. Krasnov, A.P., Rashkovan, I.A., Afonicheva, O.V., et al., “Tribochemical Processes and Tribochemical Properties of Carbonated Plastics with Glass Fiber and Glass Spheres Based on Polyamide and Polyethylene Blend”, Trenie Iznos, 2003, vol. 24, no. 6, pp. 654–660.
13. Pesetskii, S.S., Jurkowski, B., Krivoguz, Yu.M., et al., “Solubility of Additives: Grafting of Itaconic Acid onto LDPE by Reactive Extrusion. II. Effect of Stabilizers”, J. Appl. Polymer Sci., 2001, no. 81, pp. 3439–3448.10.1002/app.1800 ↗
14. Pesetskii, S.S., Jurkowski, B., Olkhov, Yu.A., et al., “Molecular and Topological Structures in Polyester Block Copolymers”, Europ. Polymer J., 2001, no. 37, pp. 2187–2199.10.1016/S0014-3057(01)00120-3 ↗
15. Jurkowska, B., Olkhov, Yu.A., Jurkowski, B., “Thermomechanical Study of Butyl Rubber Mastication during Compounding”, J. Appl. Polymer Sci., 1998, no. 68, pp. 2159–2167.10.1002/(SICI)1097-4628(19980627)68:13<2159::AID-APP12>3.0.CO;2-V ↗
16. Olkhov, Yu.A., Jurkowski, B., “Thermomechanical Study of Molecular and Topological Structure of Different Kinds of Sulfur”, J. Appl. Polymer Sci., 1997, no. 65, pp. 499–505.10.1002/(SICI)1097-4628(19970718)65:3<499::AID-APP9>3.0.CO;2-C ↗
17. Jurkowska, B., Olkhov, Yu.A., Jurkowski, B., “Application of Thermomechanical Mass Spectroscopy for Analysis of Molecular and Topological Structure of Rubber”, J. Appl. Polymer Sci., 1999, no. 74, pp. 490–501.10.1002/(SICI)1097-4628(19991017)74:3<490::AID-APP3>3.3.CO;2-Z ↗
18. Pesetskii, S.S., Jurkowski, B., Krivoguz, Yu.M., et al., “Itaconic Acid Grafting on LDPE Blended in Molten State”, J. Appl. Polymer Sci., 1997, no. 65, pp. 1493–1502.10.1002/(SICI)1097-4628(19970822)65:8<1493::AID-APP6>3.3.CO;2-8 ↗
19. Pesetskii, S.S., Jurkowski, B., Krivoguz, Yu.M., et al., “Free-Radial Grafting of Itaconic Acid onto LDPE by Reactive Extrusion: I. Effect of Initiator Solubility”, Polymer, 2001, no. 42, pp. 469–475.10.1016/S0032-3861(00)00356-6 ↗
20. Irzhak, T.F., Varyukhin, S.E., Olkhov, Yu.A., et al., “A Model of Physical Grid: Relaxation Properties of Polymers in High-Elasticity State”, Vysokomol. Soed., 1997, vol. A39, no. 4, pp. 671–676.
21. Olkhov, Yu.A. and Irzhak, T.F., “Application of Thermomechanical Analysis for Determination of Molecular- Mass Distribution of Polymers in a Block”, Vysokomol. Soed., 1998, vol. 40B, no. 10, pp. 1706–1714.
22. Olkhov, Yu.A., Baturin, S.M., and Irzhak, T.F., “Influence of Molecular Mass Distribution on Thermomechanical Properties of Linear Polymers”, Vysokomol. Soed., 1996, vol. A38, no. 5, pp. 849–856.
23. Simha, R. and Boyer, R.F., “On a General Relation Involving the Glass Temperature and Coefficients of Expansion of Polymers”, J. Chem. Phys., 1962, vol. 37, no. 5, pp. 1003–1007.10.1063/1.1733201 ↗
24. Jurkowski, B., Pesetskii, S.S., Olkhov, Yu.A., et al., “Investigation of Molecular Structure of LDPE Modified by Itaconic Acid Grafting”, J. Appl. Polymer Sci., 1999, no. 71, pp. 1771–1779.10.1002/(SICI)1097-4628(19990314)71:11<1771::AID-APP6>3.0.CO;2-6 ↗
25. Jurkowski, B., Olkhov, Yu.A., Kelar, K., et al., “Thermomechanical Study of Low-Density Polyethylene, Polyamide 6, and its Blends”, Europ. Polymer J., 2002, no. 38, pp. 1229–1236.10.1016/S0014-3057(01)00285-3 ↗