Modification with metals: an efficient method of improving wear resistance of phenol carboplastic pcp in friction with “viscous” corrosion-resistant steels
Source abstract
Abstract
We study the effects of modification with metal powders on the triboengineering characteristics of carboplastic PCP under friction with “viscous” corrosion-resistant steel. It is shown that B83 habbitt is the best modifier among those studied because its application simultaneously reduces the wear rate of the carboplastic and steel and the friction coefficient of the couple. From the standpoint of improving the wear resistance of the couple, modification with nickel is most effective. The positive effect of modification with metals is that metals can effectively heal surface defects and smooth the surface relief of the counterbodies, thus reducing the wear rate and friction coefficient. In carboplastics modified with metals, the most dangerous wear mechanism (ploughing) does not occur.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Anisimov, A.V., Bakharev, V.E., Ginzburg, B.M., and Tochil’nikov, D.G., Voprosy Materialovedeniya, 2002, vol. 31, no. 3, pp. 73–78.
2. Machulis, A.N., Tornau, E.Z., Diffuzionnaya stabilizatsiya polymerov (Stabilization of Polymers by Diffusion), Vil’nyus: Mintis, 1974.
3. Pesetskii, S.S., Kaplan, B.M., Starzhinskii, V.E., and Machulis, A.N., Trenie i iznos, 1984, vol. 5, no. 4, pp. 615–621.
4. Struk, V.A., Sozdanie I Issledovanie Machinostroil’nykh Materialov na Osnove Modifitsirovannykh Termoplastov (Development and Exploration of Machine Building Materials Based On Modified Thermoplastics), Abstract of Ph.D. Dissertation, Minsk: Physical and Technological Institute of the BSSR Academy of Science, 1979.
5. Minami, M., Suzuki, M., and Nishimura, M., Evaluation of tribological characteristics of PTFE composite transfer films in ultra-high vacuum, Tribology Transactions, 1993, vol. 36, no. 1, pp. 95–103.10.1080/10402009308983137 ↗
6. Goldade, V.A., Struk, V.A., and Pesetskii, S.S., Ingibitory Iznashivaniya Metallopolimernykh System (Inhibitors of Wear of Metal-Polymer Sistem), Moscow: Khimiya, 1993.
7. Belyi, V.A., Sviridenok, A.I., Petrokovets, M.I., and Savkin, V.G., Trenie i Iznos Materialov na Osnove Polimerov (Friction and Wear of Polymer-Based Materials), Minsk: Nauka i tekhnika, 1976.
8. Belyi, V.A., Karpenko, G.D., and Myshkin, N.K., Struktura i Metody Formirovaniya Iznosostoykikh Poverkhnostnykh Sloev (The Structure and Methods of Formation of Wear Resistant Surface Layers), Moscow: Mashinostroyenie, 1991.
9. Fei, Li, Feng-Yuan, Yan, Lai-Gui, Yu, Wei-Min, Liu, The tribological behaviors of copper-coated draphite filled PTFE composites, Wear, 2000, vol. 237, pp. 33–38.10.1016/S0043-1648(99)00303-8 ↗
10. Pasaribu, H. R., Sloetjes, J. W., and Schipper D. J., Friction reduction by adding copper axide into alumina and zirconia ceramics, Wear, 2003, vol. 255, pp. 699–707.10.1016/S0043-1648(03)00267-9 ↗
11. Tochil’nikov, D.G., Ginzburg, Metodika ekspressivnykh tribotekhnicheskikh ispytanii antifriktsionnykh polimerov, Voprosy materialovedeniya, 2002, vol. 31, no. 3, pp. 39–48.
12. Abozin, I.Yu., Anisimov, A.V., Bakhareva, V.E., Ginzburg, B.M., and Tochil’nikov, D.G., Voprosy Materialovedeniya, 2003, vol. 35, no. 3, pp. 7–16.
13. Anisimov, A.V., Barakhtin, B.K., Bakhareva, V.E., and Rybin, V.V., Voprosy materialovedeniya, 2006, vol. 46, no. 2, pp. 36–44.
14. Abozin, I.Yu., Anisimov, A.V., Barakhtin, B.K., and Bakhareva, V.E. Voprosy Materialovedeniya, 2003, vol. 35, no. 3, pp. 28–35.