Wear Resistance of Plasma Coatings Based on Self-Fluxing PG-10K-01 Alloy Strengthened by Transition Metal Borides
Source abstract
Abstract
The presented results significantly expand the information on the modification of sputtered materials (PG-10K-01 + CrB2 or TiB2) in a plasma stream, which makes it possible to vary the operational parameters of the process for shaping the necessary structure of the protective layer with enhanced performance properties. Thus, if the parts are subject to impact loads, the preferred option is fused coatings in the form of gradient-layer composites. If the parts operate under ordinary abrasive friction, the fusion operation can be excluded from the production process provided that particles are ground during sputtering; in addition, an evenly strengthened coating structure is formed. New compositions of microcomposites for plasma sputtering of coatings are developed for being crushed in the plasma stream, which is followed by the spheroidization of dispersed components; this allows excluding the use of submicron powders during plasma sputtering for they are somewhat difficult to supply along powder-feeding lines and improving the wear resistance of the composites by 7.35–27.33%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Borisov, Yu.S., Fishman, S.L., Yushkov, V.I., et al., Cermet plasma coatings, in Neorganicheskie i organosilikatnye pokrytiya (Inorganic and Organosilicate Coatings), Leningrad: Nauka, 1975, pp. 87–96.
2. Klinskaya (Rudenskaya), N.A., Development of plasma metallization technology of refractory powders for deposition of wear-resistant coatings based on nickel and iron, Cand. Sci. (Eng.) Dissertation, Moscow: All-Russ. Res. Des. Inst. Hard Alloys Refract. Met., 1986.
3. Rudenskaya, N.A., Shveikin, G.P., Sokolova, N.V., and Rudenskaya, M.V., Pulse division of plasma spheroids, Dokl. Chem., 2009, vol. 429, no. 1, pp. 294–296.10.1134/S001250080911010X ↗
4. Rudenskaya, N.A., The effect of pulsed fission of plasma spheroids on the structure of ceramic coatings, Materialy 12-oi Mezhdunarodnoi konferentsii “Plenki i pokrytiya–2015” (Proc. 12th Int. Conf. “Films and Coatings–2015”), St. Petersburg: Politekh. Univ., 2015, pp. 309–311.
5. Kudinov, V.V., Plazmennye pokrytiya (Plasma Coatings), Moscow: Nauka, 1977.
6. Samsonov, G.V. and Vinnitskii, I.M., Tugoplavkie soedineniya (Refractory Compounds), Moscow: Metallurgiya, 1976.
7. Rudenskaya, N.A., Shveikin, G.P., Rudenskaya, M.V., and Nikolaenko, I.V., The structure formation of the main layer of Ni(Co)–Cr–B–Si–TiB2, TiCrB2 coatings, Materialy 11-oi Mezhdunarodnoi konferentsii “Plenki i pokrytiya–2013” (Proc. 11th Int. Conf. “Films and Coatings–2013”), St. Petersburg: Politekh. Univ., 2013, pp. 28–31.
8. Rudenskaya, N.A., Niss, V.S., and Rudenskaya, M.V., BY Patent 16962, Afits. Byul., 2012.
9. Kolomytsev, T.P., Reaction of boron with chromium in ternary alloys based on nickel, in Issledovaniya po zharoprochnym splavam (Studies on Heat-Resistant Alloys), Moscow: Akad. Nauk SSSR, 1960, no. 6, pp. 83–85.
10. Kolomytsev, T.P., The structure of nickel-chromium-boron alloys, Dokl. Akad. Nauk SSSR, 1962, vol. 144, no. 1, pp. 112–114.