journal article·2010-06

Development of a method for selecting technical ceramics for protection against abrasive erosion

I. N. Karelin

Journal of Friction and Wear· Volume 31· Issue 3
Publisher page

Abstract

The paper deals with the solution of a topical problem of selecting protective ceramic materials to improve the service life of parts of gas-and-oil and other equipment that experience abrasive erosion. The available theoretical and experimental methods of specifying protective materials are analyzed. The author discusses the potential of the energy concept of the abrasive erosion process and uses this concept together with system approach methodology to propose new numerical characteristics. The possibility of determining these characteristics for ceramic materials by the calculation-experimental method involving a developed technique and device is shown. The availability of adequate numerical characteristics of the abrasive-containing flow and the ceramic material forms the basis for selecting a ceramic material using the criterion of its minimal wear intensity in the contaminated flow of a working fluid.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Engineering Technology and Methodologies · Surface Treatment and Coatings · Engineering and Environmental Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Drozdov, Yu.N., Nadein, V.A., and Savinova, T.M., Summarized Characteristics for Determination of the Service Life by the Wear of Industrial Ceramics, Tren. Iznos, 2008, vol. 29, no. 1, pp. 22–28 [J. Fric. Wear (Engl. Transl.), 2008, vol. 29, no. 1, p. 15].
2. Il’in, V.K. and Luzgachev, M.V., The New Multipurpose Valve RRE-PT, Energosberezhenie, 2005, no. 3, p. 60.
3. Garshin, A.P., Gropyanov, V.M., Zaitsev, G.P., and Semenov, S.S., Keramika dlya mashinostroeniya (Ceramics for Machinery Manufacturing), Moscow: Nauchtekhlitizdat, 2003.
4. Eroziya (Erosion), Pris, K., Ed., Moscow: Mir, 1982.
5. Pogodaev, L.I., Some Regularities of Metal Shock Wearing and Their Resistance Prediction According to Energy Criterion, in Trenie, iznos i smazochnye materialy (Friction, Wear and Lubrication Materials), Moscow: Mashinostroenie, 1985, pp. 256–260.
6. Kleis, I.R. and Uuemyis, Kh.Kh., Iznosostoikost’ elementov izmel’chitelei udarnogo deistviya (Wear Resistance of Impact Grinder Elements), Moscow: Mashinostroenie, 1986.
7. Tenebaum, M.M., Soprotivlenie abrazivnomy iznashivaniyu (Abrasive Wear Resistance), Moscow: Mashinostroenie, 1976.
8. Zukas, J.A., Nicholas, T., Swift, H.F., and Greszczuk, L.B., Dinamika udara (Impact Dynamics), New York: Wiley, 1982; Moscow: Mir, 1985.
9. Vinogradov, V.N., Biryukov, V.I., Nazarov, S.I., and Chervyakov, I.B., Experimental Investigations of Material Response to Spherical Particle Impact, Tren. Iznos, 1982, vol. 3, no. 1, pp. 160–164.
10. Ellermaa, R.-R.R., The Theory of Gas-Abrasive Wear for Metals, in Tr. Tallinskogo tekhnich. un-ta (Papers of Tallinn Technical University), Tallin, 1989, no. 690, pp. 9–20.
11. Spravochnik po tribotekhnike (Handbook on Tribological Engineering), vol 1: Teoreticheskie osnovy (Theoretical Foundations), Khebda, M. and Chichinadze, A.V., Moscow: Mahinostroenie; Warsaw: VKL, 1989.
12. Khil’chevskii, V.V., Sitnikov, A.E., and Anan’evskii, V.A., Nadezhnost’ truboprovodnoi pnevmogidroarmatury (The Reliability of Pipeline Pneumatic-Hydraulic Accessories), Moscow: Mashinostroenie, 1989.
13. Lin Zing, Zhen, Analytical Model of Dynamical Wear, Sovremen. mashinostroenie. Ser. B, 1990, no. 2, pp. 177–184.
14. Alimov, O.D., Manzhosov, V.K., and Erem’yanys, V.E., Udar. Rasprostranenie voln deformatsii v udarnykh sistemakh (Impact. Deformation Waves Propagation in Shock Systems), Moscow: Nauka, 1985.
15. Zolotar’, A.I., Sheivekhman, L.M., and Samoilovich, D.S., The Ways to Estimate the Material for Engineering Wear by Solid Particles Flow, in Obzornaya informatsiya VNIITEMR “Tekhnologiya, oborudovanie, organizatsiya i ekonomika mashinostroitel’nogo proizvodstva” (VNIITEMR General Review “Technology, Equipment, Organization and Economics of Machinery Manufacturing”), Ser. Progressivnye tekhnologicheskie protsessy v mashinostroenii (Progressive Technological Processes in Machinery Manufacturing), Moscow, 1987, issue 4.
16. Miklyaev, P.G., Neshpor, G.S., and Kudryashov V.G., Kinetika razrusheniya (Failure Kinetics), Moscow: Metallurgiya, 1979.
17. Keramicheskie materialy: sovremennoe sostoyanie issledovanii, tekhnologicheskikh razrabotok, perspektivy razvitiya (Analiticheskii material) (Ceramic Materials: Modern State of Researches, Technological Developments, Trends of Development (Analytical Material)), Moscow: MTsNTI, 1990.
18. Belinicher, I.Sh., Scratching Research by Means of ST-4 Device as a Method of Accelerated Comparable Estimation of Abrasive Wear Resistance of Materials, in Sklerometriya. Teoriya, metodika, primenenie ispytanii na tverdost’ tsarapaniem (Scleroscopy. Theory, Procedure, Hardness Test by Scratching), Khryshchov, M.M., Ed., Moscow: Nauka, 1968, pp. 135–141.
19. Boyarskaya, Yu.S., Grabko, D.Z., and Kats, M.S., Fizika protsessov mikroidentirovaniya (Physics of Microindentation Processes), Kishinev: Shtinitsa, 1986.
20. Hamada, J. and Tanida, N., Grinding Quartz, Glass, Ceramics and Ferrites with Diamond Wheels, Ceramics, 1973, vol. 24, no. 286, pp. 19–24.
21. Karelin, I.N., Modernization of Shut-off-and-Regulating Element of the Pipelines for Abrasive-Containing Mediums, Khim. Tekhnol., 2002, no. 3, pp. 32–33.