Contact Zone Changes in Cutting Alloys in the Presence of Oxygen-Containing Lubricants and Coolants
Source abstract
Abstract
Abstract— Microcapsules consisting of only a gelatin shell, a gelatin shell with magnetite, and a gelatin shell filled with ozonated water (ozonated water in the microcapsule core was adsorbed by activated carbon), a gelatin shell treated with ozone, a gelatin shell with ozone-treated magnetite, and a gelatin shell containing magnetite and ozonated water were obtained by simple coacervation method. The effectiveness of using aqueous emulsions of the shells as production lubricants and coolants during cutting in turning operations on a 16K20 screw-cutting lathe using side cutters made of high-speed R6M5 steel was investigated. The set of processed materials included 12Kh18N10Т stainless steel, 40Kh chromium steel, and VT5-1 and VT-6 titanium alloys. The introduction of ozone into the composition of microcapsules is shown to increase the period of normal wear of the cutting tool. In addition, the duration of the initial wear-out period increases. It was revealed that the wear resistance of cutting tools increased most strongly if microcapsules with gelatin shells filled with magnetite and ozonated water are used. The increase in the wear resistance of a cutting tool can be explained by the formation of lubricant films at the interface between the tool and the material being processed; the films may include metal polymers and complex compounds of atomic iron, covering surface irregularities that are sterically inaccessible to metal polymers. Based on this hypothesis, an approach has been proposed, which enables predicting the potential effectiveness of production lubricants and coolants using quantum chemistry methods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Zhang, S.-W., Green tribology: Fundamentals and future development, Friction, 2013, vol. 1, no. 2, pp. 186–194.10.1007/s40544-013-0012-4 ↗
2. Myshkin, N.K., Pesetskii, S.S., and Grigoriev, A.Ya., Polymer tribology: Current state and applications, Tribol. Ind., 2015, vol. 37, no. 2, pp. 284–290.
3. Guo, L., Qi, H., Zhang, G., Wang, T., and Wang, Q., Distinct tribological mechanisms of various oxide nanoparticles added in PEEK composite reinforced with carbon fibers, Composites, Part A, 2017, vol. 97, pp. 19–30.10.1016/j.compositesa.2017.03.003 ↗
4. Wei, W., Zhao, F., Zhang, J., Myshkin, N.K., and Zhang, G., Significant friction and wear-reduction role of attapulgite nanofibers compounded into PEEK-based materials, Compos. Sci. Technol., 2022, p. 109449.10.1016/j.compscitech.2022.109449 ↗
5. Lebedev, V.A., Aliev, M.M., Fominov, E.V., Marchenko, A.A., and Mironenko, A.E., Thermoelectric characteristics of the process of steel turning by carbide inserts with combined coatings, J. Frict. Wear, 2023, vol. 44, no. 2, pp. 71–76.10.3103/S1068366623020058 ↗
6. Migal, Yu.F. and Kolesnikov, I.V., Composition and thickness effect of TiAlN-type nanocoatings on the strength of their bond with iron: Quantum chemical analysis, J. Frict. Wear, 2022, vol. 43, no. 4, pp. 286–292.10.3103/S1068366622040080 ↗
7. Skakun, V.V., Dzhemalyadinov, R.M., and Vaniev, E.R., Increasing the durability of high-speed cutting tools by activating oil COTS with ionized air, Vestn. Povolzh. Tekhnol. Univ., Ser.: Mater. Konstrukts. Tekhnol., 2022, no. 3, pp. 24–33.
8. Isakin, I.A. and Gnyusov, S.F., Modification of high-speed steels with concentrated energy flows: A review, Uprochn. Tekhnol. Pokryt., 2018, vol. 14, no. 5 (161), pp. 209–216.
9. Gurevich, Ya.L., Rezhimy rezaniya trudnoobrabatyvaemykh materialov: spravochnik (Cutting Modes for Difficult-to-Cut Materials, The Handbook), Moscow: Mashinostroenie, 1986.
10. Loladze, T.N., Prochnost i iznosostoikost rezhushhego instrumenta (Strength and Wear Resistance of Cutting Tools), Moscow: Mashinostroenie, 1982.
11. Latyshev, V.N. and Naumov, A.G., Lubricity and chemical effect of environment in cutting of metals, J. Frict. Wear, 2001, vo. 22, no. 3, pp. 94–99.
12. Vejs, A., Makromolekulyarnaya khimiya zhelatina (Macromolecular Chemistry of Gelatin), Moscow: Pishhev. Promyshlennost, 1971.
13. Naumov, A.G., Latyshev, V.N., Radnyuk, V.S., and Naumova, O.A., Development of the theory of radical chain mechanism of action of cutting fluids in metal cutting, Metalloobrabotka, 2016, no. 4 (94), pp. 26–33.
14. Repin, D.S. and Naumov, A.G., On the effectiveness of activation of polymer-containing lubricating and cooling technological means in metal cutting machining, Vestn. UGATU, 2020, vol. 24, no. 2 (88), pp. 36–42.
15. Sheinin, V.B., Shabunin, S.A., Bobritskaya, E.V., Ageeva, T.A., and Koifman, O.I., Protonation equilibriums of porphin, 5,10,15,20-tetraphenylporphin, 5,10,15,20-tetrakis(4'-sulfonatophenyl) porphin in methanol, Macroheterocycles, 2012, vol. 5, pp. 252–259.10.6060/mhc2012.120989s ↗