The Influence of the Spatial Organization of Carbon Nanostructures on Antiwear Characteristics of Model Lubricating Systems under a Hard Friction Mode
Source abstract
Abstract
Abstract The following carbon nanostructures (CNSs) are used: shungite nanocarbon (Sh), multilayered graphene oxide (GO), multiwalled carbon nanotubes (Taunit-M), and fullerene C60. Medical Vaseline (MV) free from any additives or thickeners is used as a lubricant base. Tribological tests are carried out using a 2070 SMT-1 friction machine at a load of 2000 N. The roughness parameters of steel rollers before and after the tests are studied by profilometry. Detailed characteristics of contacting surfaces before and after friction are obtained by scanning and transmission electron microscopy. The experimental data are analyzed using the Hertz and Johnson–Kendall–Roberts models. According to the data on efficiency coefficients kef, the studied dispersions are ranked as follows in the order of deterioration of antiwear properties: MV/GO (0.5 wt %), kef of 50% > MV/Taunit-M (1.5 wt %), kef of 40% > MV/C60 (0.5 wt %), kef of 15% > MV/Sh (0.5 wt %), kef of 5%, which is in agreement with the above-mentioned sequence of CNSs at low loads. The reason for the best and worst wear factors upon using CNSs in the dispersions under study and factors affecting the values of wear in the hard friction mode are considered. The results of the study can be a basis for the development of new plastic lubricating compositions with carbon nanostructure additives for use in heavily loaded friction units.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Nyholm, D. and Espallargas, N., Functionalized carbon nanostructures as lubricant additives, Carbon, 2023, vol. 201, pp. 1200–1228.10.1016/j.carbon.2022.10.035 ↗
2. Fernandez-Silva, S.D., Garcia-Morales, M., Ruffel, C., and Delgado, M.A., Influence of the nanoclay concentration and oil viscosity on the rheological and tribological properties nanoclay-based ecolubricants, Lubricants, 2021, vol. 9, no. 1, p. 8. https://doi.org/10.3390/lubricants901000810.3390/lubricants9010008 ↗
3. Zhao, J., Huang, Y., He, Y., and Shi, Y., Nanolubricant additives: A review, Friction, 2021, vol. 9, no. 5, pp. 891–917.10.1007/s40544-020-0450-8 ↗
4. Ali, I., Basheer, A.A., Kucherova, A., Memetov, N., Pasko, T., Ovchinnikov, T., Pershin, V., Kuznetsov, D., Galunin, E., Grachev, V., and Tkachev, A., Advances in carbon nanomaterials as lubricants modifiers, J. Mol. Liq., 2019, vol. 279, pp. 251–266.10.1016/j.molliq.2019.01.113 ↗
5. Kerni L., Raina A., and Haq I.M., Friction and wear performance of olive oil containing nanoparticles in boundary and mixed lubrication regimes, Wear, 2019, vols. 426–427, part A, pp. 819–827.10.1016/j.wear.2019.01.022 ↗
6. Elomaa, O., Singh, V.K., Iyer, A., Hakala, T.J., and Koskinen, J., Graphene oxide in water lubrication on diamond-like carbon vs. stainless steel high-load contacts, Diamond Relat. Mater., 2015, vol. 52, pp. 43–48.10.1016/j.diamond.2014.12.003 ↗
7. Morshed, A., Wu, H., and Jiang, Z., A comprechensive review of water-based nanolubricants, Lubricants, 2021, vol. 9, no. 9, p. 89. https://doi.org/10.3390/lubricants909008910.3390/lubricants9090089 ↗
8. Mohamed, A., Hamdy, M., Bayoumi, M., and Osman, T., Synthesis and tribological properties of nanogrease, Ind. Lubric. Tribol., 2018, vol. 70, no. 3, pp. 512–518.10.1108/ILT-08-2017-0228 ↗
9. Parfenov, A.S., Shilov, M.A., Smirnova, A.I., Berezina, E.V., Tkachev, A.G., Burkov, A.A., Rozhkova, N.N., and Usol’tseva, N.V., Influence of various carbon allotropes on tribological and rheological characteristics of model lubricating systems, J. Frict. Wear, 2021, vol. 42, no. 3, pp. 217–224.10.3103/S1068366621030132 ↗
10. Shilov, M.A., Smirnova, A.I., Gvozdev, A.A., Rozhkova, N.N., Dyachkova, T.P., Burkov, A.A., Stolbov, D.N., Savilov, S.V., and Usol’tseva, N.V., Rheology of plastic lubricants with additives of carbon nanostructures of various type, J. Frict. Wear, 2019, vol. 40, no. 6, pp. 546–554.10.3103/S1068366619060217 ↗
11. DIN 4768: Ermittlung der Rauheitskenngrößen Ra, Rz, Rmax mit Elektrischen Tastschnittgeraten, Begriffe, Meßbedingungen, Berlin: Beuth, 1999
12. Schwarz, U.D., A generalized analytical model for the elastic deformation of an adhesive contact between a sphere and a flat surface, Colloid Interface Sci., 2003, vol. 261, pp. 99–106.10.1016/S0021-9797(03)00049-3 ↗
13. Zhai, W., Strikanth, N., Kong, L.D., and Zhou, K., Carbon nanomaterials in tribology, Carbon, 2017, vol. 119, pp. 150–171. https://doi.org/10.1016/j.carbon.2017.04.02710.1016/j.carbon.2017.04.027 ↗
14. Kamel, B.M., Mohamed, A., Sherbiny, M.E., Abed, K.A., and Abd-Rabou, M., Tribological properties of graphene nanoshits as an additive in calcium grease, J. Dispers. Sci. Technol., 2017, vol. 38, no. 10, pp. 1495–1500.10.1080/01932691.2016.1257390 ↗