journal article·2022-06

Comparison of the Influence of High-Energy Surface Treatment Methods on Friction and Wear of a 30KhGSN2A Steel (CSN 16532)–30KhGSN2A Steel (CSN 16532) Pair

L. I. Kuksenova, D. A. Kozlov

Journal of Friction and Wear· Volume 43· Issue 3
Publisher page

Abstract

In this paper, we present the evaluation results of the tribotechnical characteristics of a dry friction pair of 30KhGSN2A steel (CSN 16532)–30KhGSN2A steel (CSN 16532) at pressures up to 350 MPa using KE-4 and UMT-1 laboratory friction machines, as well as a special stand simulating a real hinge-bolted connection. The surface of the steel shafts was processed by electrospark alloying (coatings were made of BrAZhMts10-3-1.5 and BrMtsF3 bronzes) and ion implantation (a copper ion beam was used). It is shown that, the minimal values of the friction coefficient (~0.10) are observed for a pair with a BrMtsF3-6 coating under laboratory test conditions at 150–200 MPa and (~0.13) for a pair with a BrA-ZhMts10-3-1.5 coating at 200–250 MPa; wear is reduced by 1.5–2 times. Under the stand test conditions, it was obtained that the increase in the wear resistance of steel is 1.5, 1.7, and 5.7 times and the decrease in the friction coefficient is 1.3, 1.5, and 3.1 times for friction pairs with a coating of BrA-ZhMts10-3-1.5, BrMtsF3-6, and copper, respectively. An improvement of tribotechnical parameters of steel friction pairs is largely due to the “long-range action” effect that manifests itself during high-energy treatments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Metal and Thin Film Mechanics · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Ovcharenko, P.G., Leshchev, A.Yu., and Tarasov, V.G., Comparative analysis of wear resistance of surface layers obtained by spark-alloying, Upochn. Tekhnol. Pokryt., 2018, vol. 14, no. 1, pp. 27–29.
2. Koreshkov, A.V., Boitsov, A.G., and Amui, A.M., Electrospark alloying of aircraft engines from titanium alloys, in Tezisy dokladov 19-oi mezhdunarodnoi konferentsii Aviatsiya i kosmonavtika (Proceedings of the 19th International Conference on Aviation and Cosmonautics), Moscow: Pero, 2020, pp. 272–273.
3. Ivanov, V.I., Electrospark alloying of forging production: Technology elements, Sel’skohoz. Tekh.: Obsluzh. Remont, 2015, no. 9, pp. 23–26.
4. Ivanov, V.I., Denisov, V.A., and Igan’kov, D.A., Use of modern resource-saving methods in parts' manufacturing and repairing on the example of electric spark alloying (ESA), Izv. Yu.-Zap. Univ., 2019, vol. 23, no. 6, pp. 8–20.
5. Yagodkin, Yu.D., Ion-beam processing of metals and alloys, Itogi Nauki Tekh., Ser.: Metalloved. Term. Obrab., 1990, vol. 24, pp. 167–221.
6. Sulima, A.M. and Shulov, V.A., Influence of ion alloying on the heat resistance of alloys based on Ni and Ti, MiTOM, 1989, no. 10, pp. 37–43.
7. Singh, A., Knystautas, E., and Elboujdaine, M., Electrochemical behaviour of nitrogen-implanted 4145 steel, Nucl. Instrum. Methods Phys. Res., Sect. B, 1988, nos. 3–4, pp. 495–499.10.1016/0168-583X(88)90318-7 ↗
8. Ma, F., Li, J.J., and Li, H.D., Abrasive wear studies of nitrogen implanted aluminium and titanium, Surf. Coat. Technol., 1989, no. 1, pp. 31–36.10.1016/0257-8972(89)90119-9 ↗
9. Belyi, A.V., Kukareko, V.A., and Pateyuk, A., Tribological behavior of intermetallic Fe3Al alloy treated by intensive beams of nitrogen ions, J. Frict. Wear, 2007, vol. 28, no. 6, pp. 508–513.10.3103/S1068366607060049 ↗
10. Belyi, A.V., Artemchik, A.G., and Kolesnikova, A.A., Ion-beam processing and tribotechnical properties of austenitic chromium steels, in Materialy vserossiiskoi nauchno-prakticheskoi konferentsii: Novye tekhnologii Vysshei shkoly. Nauka, tekhnika, pedagogika (Proceedings of the All-Russian Conference on New Technologies of Higher Education: Science, Technology, Pedagogy), Moscow: Mosk. Politekh. Univ., 2020, pp. 145–150.
11. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamentals of Friction and Wear Calculations), Moscow: Mashinostroenie, 1977.
12. Izbiratel’nyi perenos v tyazhelo nagruzhennykh uzlakh treniya (Selective Transfer in Heavily Loaded Friction Units), Garkunov, D.N., Ed., Moscow: Mashinostroenie, 1982.
13. Ovchinnikov, V.V. and Kozlov, D.A., Influence of bronze grade on the properties of steel 30KhGSN2A in electrospark alloying, Mashinostr. Inzhen. Obrazov., 2008, no. 1, pp. 33–40.
14. Alekseev, N.M., Bogdanov, R.I., Bushe, N.A., Melashenko, A.I., Nagornyh, S.N., and Trankovskaya, G.R., New about the structural features of the friction of solids, Trenie Iznos, 1988, vol. 9, no. 6, pp. 965–974.
15. Kuksenova, L.I., Kozlov, D.A., and Alekseeva, M.S., Study of operational properties of steel friction pairs with antifriction coating from copper alloys produced by electric spark alloying, Fiz. Khim. Obrab. Mater., 2021, no. 4, pp. 31–41.