journal article·2022-04

Disc Brake with Two Thermally Insulated Friction Units with Different Frictional Properties

Yu. I. Osenin, D. S. Krivosheya, Yu. V. Krivosheya, A. V. Chesnokov

Journal of Friction and Wear· Volume 43· Issue 2
Publisher page

Abstract

The study considers the principles of creating a disc brake, promoting consistently high friction in a wide range of brake temperatures. The selection of friction materials for thermally insulated friction units is carried out according to the principle of mutual compensation of the negative properties of one friction unit due to the positive properties of another one. For example, for a cast iron–35GS steel disc brake, when heated to 300°C, the friction coefficient changes from 0.38 to 0.17, while for a carbon–35GS steel disc brake, the reverse effect of a coefficient variation from 0.17 to 0.58 is observed. A combination of the given tribological systems provides an acceptably high friction coefficient in the entire brake temperature range. A disc brake with two heat-insulated friction units makes it possible to improve the rolling stock braking efficiency. The cost of the new disc brake (compared to a disc brake based on a composite carbon–carbon friction material) is expected to be lower by about 30%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Ehlers, H.-R. et al., Potential and limits of opportunities of the block brake, Glasers Ann., 2002, nos. 6–7, pp. 290–300.
2. Myshkin, N.K., Grigoriev, A.Y., Kavaliova, I.N., et al., Contact interaction in precision tribosystems, J. Frict. Wear, 2020, vol. 41, no. 3, pp. 191–197.10.3103/S1068366620030113 ↗
3. Seelam, A.B., Hussain, N.A.Z., and Krishanmurthy, S.H., Design and analysis of disc brake system in high speed vehicles, Int. J. Simul. Multidisci. Des. Optim., 2021, no. 12, p. 19. https://doi.org/10.1051/smdo/202101910.1051/smdo/2021019 ↗
4. Chan, D. and Stachowiak, G.W., Review of automotive brake friction materials, Proc. Inst. Mech. Eng., Part D, 2004, vol. 218, no. 9, pp. 953–966. https://doi.org/10.1243/095440704185677310.1243/0954407041856773 ↗
5. Shpenev, A.G., Influence of thermoelastic instability on the wear of composite brake discs, J. Frict. Wear, 2021, vol. 42, no. 1, pp. 52–62. https://doi.org/10.32864/0202-4977-2021-42-1-52-6210.32864/0202-4977-2021-42-1-52-62 ↗
6. El-Tayeb, N.S.M. and Liew, K.W., On the dry and wet sliding performance of potentially new frictional brake pad materials for automotive industry, Wear, 2009, vol. 266, no. 1, pp. 275–287. https://doi.org/10.1016/j.wear.2008.07.00310.1016/j.wear.2008.07.003 ↗
7. Peng, T., Yan, Q., Li, G., et al., The braking behaviors of Cu-based metallic brake pad for high-speed train under different initial braking speed, Tribol. Lett., 2017, vol. 65, no. 4, p. 135. https://doi.org/10.1007/s11249-017-0914-910.1007/s11249-017-0914-9 ↗
8. Kindrachuk, M., Volchenko, D., Balitskii, A., Abramek, K.F., Volchenko, M., Balitskii, O., Skrypnyk, V., Zhuravlev, D., Yurchuk, A., and Kolesnikov, V., Wear resistance of spark ignition engine piston rings in hydrogen-containing environments, Energies, 2021, vol. 14, no. 16, p. 4801. https://doi.org/10.3390/en1416480110.3390/en14164801 ↗
9. Myshkin, N.K., Zhang, G., Gutsev, D.M., Grigoriev, F.A., and Wang, W., Characteristics of peek-based nanocomposites in friction on steel, J. Frict. Wear, 2021, vol. 42, no. 3, pp. 350–357. https://doi.org/10.32864/0202-4977-2021-42-3-350-35710.32864/0202-4977-2021-42-3-350-357 ↗
10. Balyts’kyi, O.I., Kolesnikov, V.O., and Eliasz, J., Study of the wear resistance of high-nitrogen steels under dry sliding friction, Mater. Sci., 2013, vol. 48, no. 5, pp. 642–646. https://doi.org/10.1007/s11003-013-954910.1007/s11003-013-9549 ↗
11. Balyts'kyi, O.I., Kolesnikov, V.O., and Kawiak, P., Tribotechnical properties of austenitic manganese steels and cast-irons under sliding friction conditions, Mater. Sci., 2005, vol. 41, no. 5, pp. 624–630.10.1007/s11003-006-0023-7 ↗
12. Mithlesh, S., Zubair, A.T., Mohit, B., Kotte, V., Kumar, K.P., Kurakula, V.S., and Singh, M., Improvement in performance of vented disc brake by geometrical modification of rotor, Mater. Today: Proc., 2021. https://doi.org/10.1016/j.matpr.2021.05.00610.1016/j.matpr.2021.05.006 ↗
13. Osenin, Yu.Yu., Douma, M.Al-M., Osenin, Yu.I., Sergienko, O.V., Sosnov, I.I., and Chesnokov, A.V., Providing the stability of the coefficient of friction of a vehicle disk brake under extreme operating conditions, J. Frict. Wear, 2016, vol. 37, no. 3, pp. 230–236.10.3103/S1068366616030132 ↗
14. Osenin, Yu.I., Kryvosheya, D.S., Kryvosheya, Yu.V., and Osenina, N.Yu., Disc brakes, Ukr. Patent 148 210, Byull. Izobret., 2021, no. 29.
15. Osenin, Yu.I., Malahov, O.V., Malahova, V.V., Krivosheya, Ju.V., and Antoshkina, L.I., Friction machine, Ukr. Patent 137412, Byull. Izobret., 2019, no. 20.