journal article·2021-12

Test of Diamond-Like Coatings with Monocrystalline Carbon for Tribological Purposes

V. A. Levchenko, I. A. Buyanovskii, V. D. Samusenko

Journal of Friction and Wear· Volume 42· Issue 6
Publisher page

Abstract

The region of the possible existence of monocrystalline carbon is established on the sp1sp2sp3 ternary phase diagram. This region has a homeotropically aligned two-dimensionally ordered structure of the sp1sp3 hybridization type. The use of monocrystalline carbon as a coating on working surfaces of heavily loaded friction units allows covering these surfaces with a highly ordered homeotropically aligned layer of lubricating medium molecules. Monocrystalline carbon coatings-orientants with a thickness of 0.1 μm or higher were obtained by the pulsed condensation of carbon plasma in combination with additional irradiation with Ar+ ions. As shown by the XPS method, monocrystalline carbon contains not only the sp1 phase but also the sp3 phase. According to tribological tests, the respective friction coefficients at room temperature for a steel–steel friction pair with friction in an inactive Vaseline oil, steel coated with amorphous carbon, and steel coated with monocrystalline carbon were 0.18, 0.21, and 0.1. In the same conditions, the coefficient of friction in the lubricating medium of the same oil but with an oleic acid additive of 1 wt % was 0.12. At higher temperatures, the difference between the coefficients of friction for these tribocouplings was even more striking in favor of the monocrystalline coating. The analysis of the entire set of results allowed localizing monocrystalline carbon on a ternary phase diagram for assessing the possible regions of existence of diamond-like phases. The possibility of using the sp3/sp1 hybridized states ratio as a criterion for choosing the optimal mode of synthesizing monocrystalline coatings-orientants is shown.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Tribology and Wear Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Bewilogua, K. and Hofmann, D., History of diamond-like carbon films—From first experiments to worldwide applications, Surf. Coat. Technol., 2014, vol. 242, pp. 214–225.10.1016/j.surfcoat.2014.01.031 ↗
2. Erdemir, A. and Donnet, C., Tribology of diamond-like carbon films: recent progress and future prospects, J. Phys. D: Appl. Phys., 2006, vol. 39, no. 18, p. R311.10.1088/0022-3727/39/18/R01 ↗
3. Tyagi, A., Walia, R.S., Murtaza, Q., et al., A critical review of diamond like carbon coating for wear resistance applications, Int. J. Refract. Met. Hard Mater., 2019, vol. 78, pp. 107–122.10.1016/j.ijrmhm.2018.09.006 ↗
4. Semenov, A.P., Tribological properties and vacuum ion-plasma methods of application of diamond and diamond-like coatings, J. Frict. Wear, 2009, vol. 30, no. 1, pp. 62–75.10.3103/S1068366609010115 ↗
5. Ferrari, A.C., Nondestructive characterization of carbon films, in Tribology of Diamond Like Carbon Films: Fundamentals and Applications, Donnet, C. and Erdemir, A., Eds., Boston, MA: Springer-Verlag, 2008, pp. 23–85.
6. Robertson, J., Classification of diamond-like carbons, in Tribology of Diamond Like Carbon Films: Fundamentals and Applications, Donnet, C. and Erdemir, A., Eds., Boston, MA: Springer-Verlag, 2008, pp. 13–23.
7. Levchenko, V.A., Guseva, M.B., Babaev, V.G., Novikov, N.D., and Matveenko, V.N., Interaction of epitropic liquid crystals with the surface of linear-chain carbon, Poverkhnost’, 2005, no. 10, pp. 52–59.
8. Kudryavtsev, Yu.P., Evsyukov, S.E., Babaev, V.G., Guseva, M.B., Khvostov, V.V., and Krechko, L.M., Oriented carbyne layers, Carbon, 1992, vol. 30, pp. 213–221.10.1016/0008-6223(92)90082-8 ↗
9. Levchenko, V.A., Buyanovakii, I.A., and Matveenko, V.N., To the new concept of green tribology, J. Mater. Sci. Chem. Eng., 2017, vol. 5, no. 1, pp. 175–187.
10. Drozdov, Yu.N., Buyanovskii, I.A., Levchenko, V.A., Bol’shakov, A.N., Sipatrov, A.G., Zelenskaya, M.N., Bartko, R.V., and Matveenko, V.N., Hard carbon coatings and boundary lubrication of steel parts, J. Mach. Manuf. Reliab., 2014, vol. 43, no. 4, pp. 298–305.10.3103/S1052618814040049 ↗
11. Belenkov, V.A., Ivanovskaya, V.V., and Ivanovskii, A.L., Nanoalmazy i rodstvennye uglerodnye nanomaterialy (Nanodiamonds and Related Carbon Nanomaterials), Yekaterinburg, 2008.
12. Georgakilas, V., Perman, J.A., Tucek, J., and Zboril, R., Broad family of carbon nanoallotropes: classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures, Chem. Rev., 2015, vol. 115, no. 11, pp. 4744–4822.10.1021/cr500304f ↗
13. Heimann, R.B., Evsyukov, S.E., and Koga, Y., Carbon allotropes: a suggested classification scheme based on valence orbital hybridization, Carbon, 1997, vol. 35, nos. 10–11, pp. 1654–1658.10.1016/S0008-6223(97)82794-7 ↗