journal article·2021-07

Simulation of the Operation of Contact Face Seals for Multimode Turbomachinery

S. V. Falaleev, D. S. Lezhin

Journal of Friction and Wear· Volume 42· Issue 4
Publisher page

Abstract

In this paper, we present a simulation model of a contact face seal for a multimode turbomachine in which the processes of hydrodynamics, deformations, and wear of sealing surfaces are considered in common. The effect of the gap shape on the characteristics of the contact face seal is studied. It was revealed that in the multimode operation of a turbomachine, the combined action of deformations and wear of the contacting sealing surfaces can qualitatively change the gap shape, as well as the contact pressure, heat release, and the amount of leakage. When calculating seals, it is necessary to take into account the history of loading to predict the lifetime and the tightness level of the seals. Complex gap shapes that arise when changing the operating mode of the turbomachine lead to significant leaks of the operating fluid and intense wear. The created software package, which allows simulating the operation of a multimode contact face seal and determining the specified parameters of the operating modes of the turbomachine to the seal life up to a certain limit, as well as the change in temperature, friction power, and leakage through the seal during the operating time, is described. The simulation model can be used to develop methods for calculating the characteristics of a seal, estimate the degree of influence on the characteristics of operational and design factors, develop accelerated test methods with a joint consideration of deformations and wear of sealing surfaces. The use of the model at the stage of fine-tuning the design of the sealing unit and the assignment of operating modes will increase the information content of tests and reduce design costs by reducing the volume of experimental research. The structure of the simulation model allows one to change individual modules by choosing the most suitable design model and allows both simulation and full-scale modeling when individual physical processes during the calculation process will be simulated on bench installations and the results are transmitted to the calculation cycle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Engineering Diagnostics and Reliability · Technical Engine Diagnostics and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Falaleev, S.V., Bondarchuk, P.V., and Tisarev, A.Yu., Carbon face seals for aircraft engines, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 302, no. 1, art. ID 012004.10.1088/1757-899X/302/1/012004 ↗
2. Uplotnenie i uplotnitel’naya tekhnika: Spravochnik (Sealing and Sealing Equipment: Handbook), Golubev, A.I. and Kondakov, L.A., Eds., Moscow: Mashinostroenie, 1986.
3. Balyakin, V.B., Use of gas and hydrodynamic lubrication in seals for aircraft engine rotors, Izv. Vyssh. Uchebn. Zaved., Aviats. Tekh., 2017, vol. 60, no. 2, 129–132.
4. Balyakin, V.B., Lavrin, V.B., and Ossiala, V.B.A., Procedure to determine friction torque in a mechanical membrane contact seal, J. Frict. Wear, 2019, vol. 40, no. 1, pp. 46–50.10.3103/S1068366619010021 ↗
5. Lebeck, A.O., Principles and Design of Mechanical Face Seals, Chichester: Wiley, 1991.
6. Ovchar, Z.N., Mashkov, Yu.K., and Prokudina, N.A., Improvement of design of face seals of oil-transfer pumps based on analysis of hydromechanical and thermal processes, J. Frict. Wear, 2006, vol. 27, no. 2, pp. 56–61.
7. Vinogradov, A.S., Seal design features for systems and units of aviation engines, Life Sci. J., 2014, vol. 11, no. 8, pp. 575–580.
8. Bruce, R.W., Handbook of Lubrication and Tribology: Theory and Design, Boca Raton, FL: CRC Press, 2012, 2nd ed.10.1201/b12265 ↗
9. Balyakin, V.B. and Falaleev, S.V., Methods and means of reducing friction torque in face seals, J. Frict. Wear, 2020, vol. 41, no. 5, pp. 447–452.10.3103/S1068366620050062 ↗
10. Pirskii, M.M., Testing results of contact seals in a cryogenic environment, Materialy Rossiiskogo simpoziuma po tribologii “Aktual’nye problemy tribologii,” Tezisy dokladov (Proc. Russ. Symp. on Tribology “Current Problems in Tribology,” Abstracts of Papers), Samara, 1994, part 1, p. 37.
11. Trenie, iznashivanie i smazka. Spravochnik (Friction, Wear, and Lubrication: Handbook), Kragel’skii, I.V. and Alisin, V.V., Eds., in 2 vols., Moscow: Mashinostroenie, 1978.
12. Silaev, B.M., Generalized model of the external friction and wear, Mashinovedenie, 1989, no. 2, pp. 56–65.
13. Patir, N. and Cheng, H.S., An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication, J. Lubr. Technol., 1978, vol. 100, no. 1, pp. 12–17.10.1115/1.3453103 ↗
14. Bauer, P., Glickman, M., and Iwatsuki, F., Analytical Techniques for the Design of Seals for Use in Rocket Propulsion Systems, Vol. 2: Dynamic Seals. Technical Report AFRPL-TR-65-61, Dayton, OH: Air Force Rocket Propulsion Lab., 1965.
15. Müller, G.S., Das Abdichtverhalten von Gleitringdichtungen aus Siliziumkarbid, PhD Thesis, Stuttgart: Univ. of Stuttgart, 1993.
16. Lezhin, D.S., Determination of thermodynamic properties of the working fluid in contact sealing units, Vestn. Samar. Gos. Aerokosm. Univ. im. S.P. Koroleva, 2000, no. 4-2, pp. 160–163.