journal article·2021-07

Effect of the Processing Method on the Microtopography of Rough Layers and on Oil Absorption by Friction Surfaces

V. L. Basinyk, P. A. Vityaz, M. A. Levancevich, K. V. Grigorovich, S. I. Platov, D. V. Terentyev, V. V. Rubanik, M. V. Kharchenko, R. R. Dema

Journal of Friction and Wear· Volume 42· Issue 4
Publisher page

Abstract

The paper presents the results obtained for assessing oil absorption of the microrelief of heavily loaded surface layers. The studies have shown that it is preferable to form a friction surface by means of grinding, since such a surface is characterized by a higher level of oil absorption, which promotes a better involvement of the lubricant. An analytical model has been developed, which makes it possible to determine the thickness of the lubricating layer taking into account the oil absorption level of the contacting surfaces. It should be noted that as the load acting on the contact of the surfaces in a friction assembly increases, the thickness of the lubricating film decreases, and in the range of low load values, the intensity of its changes is more significant than it is in the zone of increased load. It has been shown that increasing velocity from 0.5 to 2.0 m/s leads to an average 2.8-fold increase in the thickness of the lubricating film, whereas changing relative the oil absorption level from 0.4 to 0.6 results in an almost 1.6-fold increase in the thickness of the lubricating film. Thus, the parameter of relative oil absorption by rough contacting surfaces exerts the greatest effect on the change in the thickness of the lubricating film in friction assemblies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Kovalevskii, V.F., Tribological characteristics of sliding friction pairs with oil-retaining relief formed by drip-adhesive technology, Omsk. Nauchn. Vestn., 2013, no. 2, pp. 78–81.
2. Belov, V.K., Gubarev, E.V., Papshev, A.V., Gofman, N.G., and Begletsov, D.O., Correlation between 3D texture of steel substrate and tin-coated surface with various coating masses, Key Eng. Mater., 2018, vol. 769, pp. 120–127. https://doi.org/10.4028/www.scientific.net/KEM.769.12010.4028/www.scientific.net/KEM.769.120 ↗
3. Crouch, S.L. and Starfield, A.M., Boundary Element Methods in Solid Mechanics, London: George Allen & Unwin, 1983.10.1115/1.3167130 ↗
4. Chichinadze, A.V., Osnovy tribologii: uchebnik dlya tekhnicheskikh vuzov (Fundamentals of Tribology: Manual for Technical Higher Education Institutions), Moscow: Mashinostroenie, 2001.
5. Raiko, M.V., Kadomskii, V.P., and Belous, V.S., Formation of a lubricant layer during the running-in of contact surfaces, Vestn. Mashinostr., 1978, no. 11.
6. Kodnir, D.S., Kontaktnaya gidrodinamika smazki detalei mahsin (Contact Hydrodynamics of Lubrication of Machine Parts), Moscow: Mashinostroenie, 1976.
7. Kharchenko, M.V., Kononov, V.N., and Zambrgitckaya, E.S., Elastohydrodynamic friction mode as a method of surface finishing excluding burnishing, Mater. Sci. Forum, 2019, vol. 946, pp. 732–738. https://doi.org/10.4028/www.scientific.net/MSF.946.73210.4028/www.scientific.net/MSF.946.732 ↗
8. Levantsevich, M.A., Kharchenko, M.V., and Dema, R.R., Study of the conditions for the formation of an adsorption lubrication mode of heavily loaded friction couples with modeling in a laboratory setup, J. Frict. Wear, 2019, vol. 40, no. 4, pp. 277–283. https://doi.org/10.3103/S106836661904007X10.3103/S106836661904007X ↗
9. Zhelezkov, O.S., Abramov, A.N., and Galiakhmetov, T.Sh., Search for effective lubricants and sub-lubricant coatings for stamping of stainless steel rod fasteners, Vestn. Magnitogorsk. Gos. Tekh. Univ. im. G.I. Nosova, 2017, vol. 15, no. 4, pp. 47–54.10.18503/1995-2732-2017-15-4-47-54 ↗
10. Hamrock, B.J. and Dowson, D., Isothermal elastohydrodynamic lubrication of point contacts: Part III—Fully flooded results, J. Lubr. Technol., 1977, vol. 99, no. 2, pp. 264–276.10.1115/1.3453074 ↗
11. Terentyev, D.V., Platov, S.I., Zhirkin, Yu.V., et al., Increasing the service life of heavy-loaded units of machines and units of metallurgical manufacture, Zagotovitel’nye Proizvod. Mashinostr., 2019, vol. 17, no. 6, pp. 265–270.
12. Terentyev, D.V., Ogarkov, N.N., Platov, S.I., et al., Influence of operating modes and oil absorption of contact surfaces on the thickness of the lubricating film in heavily loaded friction units of metallurgical plants, Chern. Met., 2018, no. 9, pp. 60–64.