Finite Element Analysis of Elasto-Hydrodynamic Friction: Taking into Account the Deformations of Sliding Bearing Parts
Source abstract
Abstract
A new numerical implementation of the finite element calculation of the parameters of elasto-hydrodynamic friction in sliding bearings is proposed. Triangular finite elements of the first order are used for two-dimensional modeling of the flow of lubricating fluid in the gap between contacting bodies. Twenty-node finite elements are used in the analysis of the stress-strain state of the conjugation bodies in a three-dimensional formulation. In order to increase the efficiency of computations, a new 20-node finite element is proposed, in which the joint shape functions of the second order are supplemented with disjoint shape functions of the third order. The quasi-joint approximating polynomials of the third order obtained in this way allow us to form sufficiently accurate meshes with a small number of nodes. It is important that the accuracy of the calculation is preserved while modeling thin antifriction layers, when the length of the larger side of the element is 100 or more times the length of its smaller side. An iterative scheme is implemented with alternating solutions to elastic and hydrodynamic problems. It allows us to take into account the inconsistency of the corresponding discretization meshes. The results of solving the hydrodynamic problem in the form of pressures are reduced to nodal forces at the stage of generating the initial data for solving the elastic problem. The displacements calculated when solving the elastic problem are taken into account when adjusting the gaps in the boundary conditions of the hydrodynamic problem.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Mechanical Systems and Engineering · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Ghosh, M.K., Majumdar, B.C., and Sarangi, M., Theory of Lubrication, New Delhi: McGraw-Hill, 2013.
2. Chauhan, A., Singla, A., Panwar, N., and Jindal, P., CFD based thermo-hydrodynamic analysis of circular journal bearing, Int. J. Adv. Mech. Eng., 2014, vol. 4, no. 5, pp. 475–482.
3. Gao, G., Yin, Z., Jiang, D., and Zhang, X., Numerical analysis of plain journal bearing under hydrodynamic lubrication by water, Tribol. Int., 2014, vol. 75, pp. 31–38. https://doi.org/10.1016/j.triboint.2014.03.00910.1016/j.triboint.2014.03.009 ↗
4. Qiu, C., Wang, L., Li, D., and Jin, Z., The influence of metallic shell deformation on the contact mechanics of a ceramic-on-ceramic total hip arthroplasty, Proc. Inst. Mech. Eng., Part H, 2016, vol. 230, no. 1, pp. 4–12. https://doi.org/10.1177/095441191561451410.1177/0954411915614514 ↗
5. Zernin, M.V., Mishin, A.V., Rybkin, N.N., and Shil’ko, S.V., Hydrodynamic analysis of friction bearings, Part 1: Consideration of noncylindrical working surfaces, J. Frict. Wear, 2014, vol. 35, no. 5, pp. 396–406.10.3103/S106836661405016X ↗
6. Zernin, M.V., Rybkin, N.N., Shil’ko, S.V., and Ryabchenko, T.V., Consideration of the multizone hydrodynamic friction, the misalignment of axes, and the contact compliance of a shaft and a bush of sliding bearings, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 242–251.10.3103/S1068366617030163 ↗
7. Savin, L.A. and Solomin, O.V., Modelirovanie rotornykh sistem s oporami zhidkostnogo treniya (Modeling Rotor Systems with Fluid Friction Supports), Moscow: Mashinostroenie, 2006.
8. Shabrov, N.N., Metod konechnykh elementov v raschetakh detalei teplovykh dvigatelei (Finite Element Methods in Calculations of the Parts of Thermal Engines), Leningrad: Mashinostroenie, 1983.
9. Zienkiewicz, O.C. and Morgan, K., Finite Elements and Approximation, Chichester: Wiley, 1983.
10. Makeev, E.G., Finite element theory used for the design of aircraft structures, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Kuibyshev, 1989.
11. Zernin, M.V. and Rybkin, N.N., Three-dimensional finite element for modeling thermal, elastic and thermoelastic components in the coupled problem of friction units thermoelastichydrodynamics, Vestn. Bryansk. Gos. Tekhnol. Univ., 2016, no. 5, pp. 23–32.10.12737/article_58f9c4d98171c0.05441349 ↗
12. Booker, J.F. and Huebner, K.H., Application of finite element methods to lubrication: an engineering approach, J. Lubr. Technol., 1972, vol. 94, no. 4, pp. 313–323.10.1115/1.3451719 ↗