journal article·2020-09

Effect of Temperature and Time of Annealing on the Wear Resistance of Ni–Cr–Al-Based Pseudo-Alloy Coatings Deposited by High-Speed Metallization

E. V. Astrashab, A. N. Grigorchik, V. A. Kukareko, M. A. Belotserkovskiy

Journal of Friction and Wear· Volume 41· Issue 5
Publisher page

Abstract

In this paper, we study the effect of temperature and time of annealing on the structural-phase state and tribomechanical properties of Ni–Cr–Al (40%–10%–50%)-based coatings deposited by the high-speed metallization method. The annealing of the coatings is shown to lead to the precipitation of intermetallic phases NiAl, Ni2Al3, Ni3Al, and Al3Ni, an increase in the hardness and wear resistance of the coatings, and an increase in their porosity. We developed a mathematical model that describes the dependence of the intensity of mass wear of coatings during friction without lubricant on the temperature and time of annealing. The maximal wear resistance of coatings was established after annealing at 630–640°C and an exposure time of 40–50 min.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Kulik, A.Ya., Borisov, Yu.S., Mnukhin, A.S., and Nikitin, M.D., Gazotermicheskoe napylenie kompozitsionnykh poroshkov (Gas-Thermal Spraying of Composites), Leningrad: Mashinostroenie, 1985. 2. Entsiklopediya neorganicheskikh materiaov (Encyclopedia of Inorganic Materials), Kiev: Ukr. Sov. Entsiklopediya, 1977, vol. 2.
2. Kukareko, V.A., Belotserkovskiy, M.A., Grigor-chik, A.N., and Astrashab, E.V., Structural-phase state and tribotechnical properties of pseudo-alloys sprayed from high-chromium steels and non-ferrous metals, Uprochnyayushchie Tekhnol. Pokrytiya, 2019, vol. 15, no. 8, pp. 355–359.
3. Kukareko, V.A., Grigorchik, A.N., Astrashab, E.V., Belotserkovskiy, M.A., and Shapar’, V.A., Structure and wear resistance of pseudo-alloys based on high-chromium steels, Materialy 34-oi Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Perspektivnye napravleniya razvitiya tekhnologii mashinostroeniya i metalloobrabotki,” Tezisy dokladov (Proc. 34th Int. Sci.-Tech. Conf. “Advanced Development of Machine Engineering and Metal Processing Technologies,” Abstracts of Papers), Sheleg, V.K., et al., Eds., Minsk: Biznesofset, 2019, pp. 110–112.
4. Kukareko, V.A., Belotserkovskiy, M.A., Grigorchik, A.N., Astrashab, E.V., and Sosnovskii, A.V., Effect of annealing on the structural-phase state and wear resistance of gas-thermal coatings from iron-aluminum pseudo-alloys, in Aktual’nye voprosy mashinovedeniya (Urgent Problems of Machine Science), Poddubko, S.N., et al., Eds., Minsk, 2019, pp. 294–298.
5. Belotserkovskiy, M.A., Tekhnologii aktivirovannogo gazoplamennogo napyleniya antofriktsionnykh pokrytii (Technologies of Activated Gas-Flame Spraying of Antifriction Coatings), Minsk: Tekhnoprint, 2004.
6. Spiridonov, A.A., Planirovanie eksperimenta pri issledovanii tekhnologicheskikh protsessov (Experiment Planning in the Study of Technological Processes), Moscow: Mashinostroenie, 1981.
7. Krishtal, M.A., Mekhanism diffuzii v zheleznykh splavakh (Diffusion Mechanism in Iron Alloys), Moscow: Metallurgiya, 1972.
8. Bokshtein, B.S., Diffuziya v metallakh (Diffusion in Metals), Moscow: Metallurgiya, 1978.