Variations in the properties of the friction zone of metallic composites under the effect of electric current and Pb-Sn melt in the contact gap
Source abstract
Abstract
The paper deals with study of the wear rate and specific surface electric resistance of the contact of metallic composites in dry friction at a high current density. Friction induced structures are shown to appear in the surface layer of the composites. The specific electric resistance of the friction induced structures is estimated quantitatively. It is found that their specific electric resistance is similar to that of the known electrographites and carbon graphites, resulting in a high contact resistance. The electric resistance and wear rate of the friction zone are diminished by the introduction of a Pb-Sn melt. The possibility of developing of an efficient sliding electric contact of two metallic composites with a metal melt between their friction surfaces is noted.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · Tribology and Wear Analysis · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Kostetskii, B.I., Structure-Energetic Malleability of Materials upon Friction, Trenie Iznos, 1985, vol. 6, no. 2, pp. 201–212.
2. Tushinskii, L.I. and Poteryaev, Yu.P., Preprint No 1. Novosibirsk: Novosib. Electrotech. Inst., 1991.
3. Glezer, A.V., Deformation and Microstructure Aspects of Wear, in Tribilogiya: issledovaniya i prilozhenuya. Opyt stran SShA i SNG (Tribology in the USA and the Former Soviet Union: Studies and Applications), Belyi, V.A., Ludema, K., and Myshkin, N.K., Eds., Moscow: Mashinostroenie, 1993; New York: Allerton, 1994.
4. Fadin, V.V. and Aleutdinova, M.I., The Effect of Copper Concentration on the Wear Resistance of Composites Based on Recycled ShKh15 Steel during Friction with Current Collection, J. Friction Wear, 2009, vol. 30, no. 6, pp. 449–454.10.3103/S1068366609060130 ↗
5. Myshkin, N.K., Konchits, V.V., and Braunovich, M., Elektricheskiye kontakty (Electrical Contacts), Dolgoprudnyi: Intellekt, 2008.
6. Izmailov, V.V. and Mityurev, V.I., Tribological Aspects of Application of Liquid-Metal Intercontact Media in Electrical Contacts, Trenie Iznos, 1995, vol. 16, no. 6, pp. 1133–1143.
7. Fadin, V.V. and Aleutdinova, M.I., Wear Resistance of a Sliding Electric Contact Containing Recycled ShKh15 Steel, J. Friction Wear, 2008, vol. 29, no. 5, pp. 386–391.10.3103/S1068366608050103 ↗
8. Hol’m, R., Electrical Contacts, Moscow: InLit., 1961; New York: Springer, 1979.
9. Demkin, N.B., Kontakt sherokhovatykh poverkhnostei (Contact of Rugged Surfaces), Moscow: Nauka, 1970.
10. Spravochnik po Tribotekhnike. T. 1. Teoreticheskie osnovy (Handbook on Tribotechnique. Vol. 1. Theoretical Fundamentals), Khebda, M., and Chichinadze, A.V., Eds., Moscow: Mashinostroenie, 1989.
11. Gulyaev, A.P., Metallovedenie (Metallography), Moscow: Metallurgiya, 1986.
12. Konchits, V.V., Meshkov, V.V., and Myshkin, N.K., Tribotekhnika elektricheskikh kontaktov (Tribotechnique of Electrical Contacts), Minsk: Nauka Tekhnika, 1986.
13. Myshkin, N.K., Tribology of Electrical Contacts, in Tribilogiya: issledovaniya i prilozhenuya. Opyt stran SShA i SNG (Tribology in the USA and the Former Soviet Union: Studies and Applications), Belyi, V.A., Ludema, K., and Myshkin, N.K., Eds., Moscow: Mashinostroenie, 1993; New York: Allerton, 1994.
14. Shorin, S.N., Teploperedacha (Heat Transmission), Moscow: Vysshaya Shkola, 1964.