Model for Calculating the Mean Temperature on the Friction Area of a Disc Brake
Source abstract
Abstract
The calculation scheme for determining the temperature mode of the disc brake taking into account the change of the contour contact area during braking was proposed. For this purpose, the exact solutions of the initial problem of motion and the corresponding heat problem of friction were obtained. On their basis, formulas were obtained in the analytical forms for calculating the evolution of the sliding speed, specific power and work of friction, and the mean temperature on the contact area. The thermal sensitivity of the friction pair materials was taken into account by introducing into the calculation the values of the thermal conductivity and the specific heat capacity at the volumetric temperature. Numerical analysis was performed for a brake with discs made from Termar-ADF carbon composite friction material. The values of such characteristics as speed, braking duration, and maximum and volumetric temperatures, found with and without taking into account the change in the contour contact area, were compared. The performed comparison analysis allowed us to determine the influence the contour friction area has on the evolution of mean temperature during braking. It was found that the level of the temperature calculated with consideration of the friction contour surface increases during braking is higher. Despite the fact that the average contact area is equal and the compared braking processes take place at practically the same time. During analysis, the influence of the change of the apparent contact surface area on the temperature time profile was also examined. It was noticed that a larger apparent area of contact causes a decrease in the value of the maximum temperature achieved and the time of reaching it.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Mechanical Systems and Engineering · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Dobychin, M.N. and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamental Calculations for Friction and Wear), Moscow: Mashinostroenie, 1977.
2. Chichinadze, A.V., Raschet i issledovanie vneshnego treniya pri tormozhenii (Calculation and Study of External Friction during Braking), Moscow: Nauka, 1967.
3. Chichinadze, A.V., Braun, E.D., Ginzburg, A.G., and Ignat’eva, Z.V., Raschet, ispytanie i podbor friktsionnykh par (Calculation, Testing, and Choice of Friction Pairs), Moscow: Nauka, 1979.
4. Korovchinskii, M.V., Fundamental theory of thermal contact during local friction, in Novoe v teorii treniya (Advances in Friction Theory), Moscow: Nauka, 1966, no. 11, pp. 98–145.
5. Grilitskii, D.V., Termouprugie kontaktnye zadachi v tribologii (Thermoelastic Contact Problems in Tribology), Kyiv: Inst. Soderzhaniya Metodiki Obucheniya, 1996.
6. Balakin, V. and Sergienko, V., Teplovye raschety tormozov i uzlov treniya (Thermal Calculations of Brakes and Frictional Assemblies), Gomel: Inst. Mekh. Metallopolim. Sist., Nats. Akad. Nauk Bel., 1999.
7. Kragel’skii, I.V. and Vinogradova, I.E., Koeffitsienty treniya (Friction Coefficients), Moscow: Mashgiz, 1962.
8. Bogdanovich, P.N. and Prushak, V.Ya., Trenie i iznos v mashinakh (Friction and Wear in Machines), Minsk: Vysheushaya Shkola, 1999.
9. Chichinadze, A.V., Kozhemyakina, V.D., and Suvorov, A.V., Method of temperature-field calculation in model ring specimens during bilateral friction in multidisk aircraft brakes with the IM-58-T2 new multipurpose friction machine, J. Frict. Wear, 2010, vol. 31, no. 1, pp. 23–32.10.3103/S1068366610010034 ↗
10. Chichinadze, A.V., Kozhemyakina, V.D., and Suvorov, A.V., Determination of the temperature field in aircraft brake discs from carbon friction material, Trenie Smazka Mash. Mekh., 2010, no. 5, pp. 27–32.
11. Lykov, A.V., Teoriya teploprovodnosti (Theory of Thermal Conductivity), Moscow: Vysshaya Shkola, 1967.
12. Topczewska, K., Influence of the time of increase in contact pressure in the course of braking on the temperature of a pad–disc tribosystem, Mater Sci., 2018, vol. 54, no. 2, pp. 250–259.10.1007/s11003-018-0180-5 ↗
13. Prudnikov, A.P., Brychkov, Yu.A., and Marichev, O.I., Integraly i ryady. Elementarnye funktsii (Integrals and Series. Elementary Functions), Moscow: Nauka, 1981.
14. Handbook of Mathematical Functions: with Formulas, Graphs, and Mathematical Tables, Abramowitz, M. and Stegun, I.A., Eds., New York: Dover, 1965.
15. Barber, J.R. and Martin-Moran, C.J., Green’s functions for transient thermoelastic contact problems for the half-plane, Wear, 1982, vol. 79, no. 1, pp. 11–19.10.1016/0043-1648(82)90200-9 ↗
16. Evtushenko, O., Kuciej, M., and Topczewska, K., Determination of the maximal temperature of a pad–disk tribosystem during one-time braking, Mater Sci., 2020, vol. 56, no. 2, pp. 152–159.10.1007/s11003-020-00409-x ↗