Mesomechanics of Metal-Polymeric Pairs in Friction Units under Low-Cycle Fatigue
Source abstract
Abstract
The stress-strain state of metal-polymeric friction pairs for vehicle brakes under low-cycle fatigue is examined from the standpoint of mesomechanics. The concepts of metal fatigue are developed in the scope of physical mesomechanics associated with studies on the damage accumulation, primarily in the field of multi-cycle fatigue. This has led to the understanding that low-cycle fatigue should correspond to a much higher level of damage accumulation in metal. A model of unsteady-state friction and fatigue modes of contacting elements is developed, wherein thermal explosions are the most characteristic features of the friction in the metal-polymeric friction pairs. It is shown that at the first stage, the internal chemical energy of the subsurface layer of the polymeric patch is converted into heat. Novel regularities concerning the onset and development of microcracks on the metal elements of friction pairs and on their operational surfaces in the presence of mechanical stress concentrators taking into account thermal stresses are established. The proposed model explains changes in the mechanism of crack propagation under the conditions of low-cycle fatigue in metal-polymeric friction pairs when air enters the crack and leads to the oxidation of fracture surfaces with the formation of a film. It is proposed that in this case the formation of surfaces with a subgrain structure occurs. The rate of the changes can be used to study the effect of cooling conditions on the kinetics of thermal processes in such friction pairs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Science and Applications · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Panin, V.E., Likhachev, V.A., and Grinyaev, Yu.V., Strukturnye urovni deformatsii tverdykh tel (The Structural Deformation Levels of Solids), Novosibirsk: Nauka, 1985.
2. Panin, V.E., Synergetic principles of physical mesomechanics, Fiz. Mezomekh., 2000, vol. 3, no. 6, pp. 5–36.
3. Ivanova, V.S. and Terent’ev, V.F., Priroda ustalosti metallov (The Origin of Metal Fatigue), Moscow: Metallurgiya, 1975.
4. Janahmadov, A.Kh., Pirverdiev, E.S., Vol’chenko, A.I., et al., Uzly treniya v mashinostroenii (Friction Units in Machine Engineering), Baku: ELM, 2018.
5. Alyamovskii, A.A., COSMOSWorks. Osnovy rascheta konstruktsii na prochnost’ v srede SolidWorks (COSMOSWorks: Calculation Principles of Constructions for Strength in SolidWorks), Moscow: DMK Press, 2010.
6. Chichinadze, A.V., Belousov, V.Ya., and Bogatchuk, I.M., Iznosostoikost’ friktsionnykh polimernykh materialov (Wear Resistance of Friction Polymeric Materials), Lvov: Vysshaya Shkola, 1989.
7. Chichinadze, A.V., Matvievskii, R.M., and Braun, E.D., Materialy v tribotekhnike nestatsionarnykh protsessov (The Materials on Tribological Engineering of Nonstationary Processes), Moscow: Nauka, 1986.
8. Janahmadov, A.Kh., et al., Proektnyi i proverochnyi raschet friktsionnykh uzlov barabanno- i diskovo-kolodochnykh tormozov transportnykh sredstv: standart (Engineering and Verification Calculation of Friction Units of Drum- and Disc-Shoe Brakes of Vehicles: A Standard), Baku, 2016.
9. Janahmadov, A.Kh., Vol’chenko, N.A., Skrypnik, V.S., et al., Stress-strain state of various types of discs in braking units of vehicles, in Problemi tertya ta znoshuvannya (Problems of Friction and Wear), Kyiv: Nats. Akad. Nauk Ukr., 2018, vol. 9, no. 2, pp. 16–27.
10. Janahmadov, A.Kh., Vol’chenko, N.A., Dzhavadov, M.Ya., et al., Energy load of a disc-shoe brake with an air cooling system of the “multi-jet ejector” type of a vehicle, Vestn. Azerb. Inzh. Akad., 2019, no. 11 (3), pp. 23–33.
11. Janahmadov, A.Kh., Heat failure of friction pairs (brakes) operating in repeated short regime, Frict. Wear, 1996, vol. 17, no. 4, pp. 470–474.
12. Janahmadov, A.Kh. and Javadov, M.Y., Synergetics and Fractals in Tribology, Berlin: Springer-Verlag, 2016.10.1007/978-3-319-28189-6 ↗
13. Panin, V.E. and Frolov, K.V., Wave nature of plastic deformation an fracture of solids, Proc. Int. Conf. “The Physical and Mechanical Methods of Investigations of Materials under Loading,” Tomsk: Tomsk. Gos. Univ., 1990, pp. 9–17.
14. Komotori, J. and Shimizu, M., Microstructural effects on fracture mechanisms and fatigue life in extremely low cycle fatigue, in Engineering Against Fatigue, Beynon, J.H., Brown, M.W., Lindley, T.C., Smith, R.A., and Tomkins, B., Eds., Boca Raton, FL: CRC Press, 1999, vol. 1.