Effect of Severe Plastic Deformation on Wear Resistance of Sintered Al–Sn Alloys under Dry Friction Against Steel
Source abstract
Abstract
The effect of equal channel angular extrusion (ECAE) with route A on the wear resistance of sintered Al–Sn alloys has been studied in this work. The tribological tests were carried out according to the “pin-on-disk” scheme without liquid lubrication. It was established that multiple processing by this method leads to the strengthening of the aluminum matrix and the formation of a structure with alternating Al and Sn layers which is favorable for the self-lubrication process. The wear resistance of the sintered Al–Sn alloys is increased as a result. However, the number of ECAE passes should be limited to two to three because a fragmentation of thin tin interlayers and destruction of the layered structure take place after large number of the passes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Bushe, N.A., Goryacheva, I.G., and Korneev, R.A., Contact interaction of antifriction alloys containing a soft phase, Izv. Sev.-Kavk. Nauchn. Tsentra Vyssh. Shk., Tekh. Nauki, 2001, special issue, pp. 35–39.
2. Mironov, A.E., Gershman, I.S., Gershman, E.I., and Zheleznov, M.M., Relationship between the tribological properties of experimental aluminum alloys and their chemical composition, J. Frict. Wear, 2017, vol. 38, no. 2, pp. 87–91.10.3103/S1068366617020155 ↗
3. Rusin, N.M., Skorentsev, A.L., and Kolubaev, E.A., Structure and tribotechnical properties of Al–Sn alloys prepared by the method of liquid-phase sintering, Adv. Mater. Res., 2014, vol. 1040, pp. 166–170.10.4028/www.scientific.net/AMR.1040.166 ↗
4. Noskova, N.I., Korshunov, A.G., and Korznikov, A.V., Microstructure and tribological properties of Al–Sn, Al–Sn–Pb, and Sn–Sb–Cu alloys subjected to severe plastic deformation, Met. Sci. Heat Treat., 2008, vol. 50, nos. 11–12, pp. 593–599.10.1007/s11041-009-9104-1 ↗
5. Segal, V.M., Equal channel angular extrusion: from macromechanics to structure formation, Mater. Sci. Eng., A, 1999, vol. 271, pp. 322–333.10.1016/S0921-5093(99)00248-8 ↗
6. Rusin, N.M., Skorentsev, A.L., and Mishin, I.P., Evolution of structure and properties of Al–Sn composites under deformation, Inorg. Mater.: Appl. Res., 2015, vol. 6, no. 5, pp. 427–437.10.1134/S2075113315050160 ↗
7. Xu, J., Wang, Ch., Shan, D., Guo, B., and Langdon, T.G., Micro-deformation behavior in micro-compression with high-purity aluminum processed by ECAE, Manuf. Rev., 2015, vol. 2, pp. 1–6.
8. Orolinova, M., Durisin, J., Besterci, M., Durisinova, K., Kocisko, R., Kvackaj, T., Saksl, K., and Orolinova, Z., Microstructure and texture evolution during ECAE of pure aluminium and Al–4 vol % Al4C3 powder alloy, Kovove Mater., 2012, vol. 50, pp. 433–440.
9. Kral, P., Dvorak, J., Kvapilova, M., Horita, Z., and Sklenicka, V., Microstructure changes in superplastically deformed ultrafine-grained Al–3Mg–0.2Sc alloy, Lett. Mater., 2015, vol. 5, no. 3, pp. 306–312.10.22226/2410-3535-2015-3-306-312 ↗
10. Ivanov, K.V. and Naidenkin, E.V., The input of grain boundary slippage to the total deformation of ultrafine-grained polycrystals, Zavod. Lab.,Diagn. Mater., 2011, vol. 77, pp. 30–33.