Scratch Behavior of ZrO2 Thin Film Prepared by Atomic Layer Deposition Method on Silicon Wafer
Source abstract
Abstract
To evaluate friction behaviour and adhesion strength of 130 nm-thick zirconia (ZrO2) film produceded by atomic layer deposition (ALD) on Si substrate, scratch tests were performed at two different scales; micro- and macro-scales. Surface morphology, roughness, crack propagations and interations between the surface and sliding indenter were also investigated. Scratch test was also conducted with Si substrate as a reference. The test results showed that friction coefficient (COF) was influenced by the scale of scratch test regardless of the tested materials. In microscale test, the 130 nm-thick zirconia film failed at the critical load of 96 mN and direct relationship between the generation of micro-cracks and friction coefficient was observed. Based on the Hertzian contact theory and experimental results, the macroscratch width was much greater than that in microscratch test although the maximum contact pressure were comparable in both cases. Further discussion was made with regard to the influence of the contact pressure on COF, crack generation and film removal. Various types of failure mode were identified through analyzing the mechanical response of scratch tracks both at micro- and macroscale tests. This study suggested that 130 nm-thick ALD-ZrO2 film showed better tribological and adhesion properties at microscale contact than macroscale contact.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Macwan, A., Marr, M., Kesler, O., and Chen, D.L., Microstructure, hardness, and fracture toughness of suspension plasma sprayed yttria-stabilized zirconia electrolytes on stainless steel substrates, Thin Solid Films, 2015, vol. 584, pp. 23–28.10.1016/j.tsf.2014.11.052 ↗
2. Kiguchi, T., Wakiya, N., Tanaka, J., and Shinozaki, K., Advantage of the structure and the electrical properties of epitaxial ultra-thin zirconia gate dielectrics, Mater. Sci. Eng., B, 2008, vol. 148, nos. 1–3, pp. 30–34.10.1016/j.mseb.2007.09.037 ↗
3. Fardin, V.P., Paula, V.G., Bonfante, E.A., Coelho, P.G., and Bonfante, G., Lifetime prediction of zirconia and metal ceramic crowns loaded on marginal ridges, Dental Mater., 2016, vol. 32, no. 12, pp. 1543–1554.10.1016/j.dental.2016.09.004 ↗
4. Berni, M., Lopomo, N., Marchiori, G., Gambardella, A., Boi, M., Bianchi, M., Visani, A., Pavan, P., Russo, A., and Marcacci, M., Tribological characterization of zirconia coatings deposited on Ti6Al4V components for orthopedic applications, Mater. Sci. Eng., C, 2016, vol. 62, pp. 643–655.10.1016/j.msec.2016.02.014 ↗
5. Goto, T., High-speed deposition of zirconia films by laser-induced plasma CVD, Solid State Ionics, 2004, vol. 172, nos. 1–4, pp. 225–229.10.1016/j.ssi.2004.02.034 ↗
6. Kim, D.Y., Lee, C.H., and Park, S.J., Preparation of zirconia thin films by metalorganic chemical vapor deposition using ultrasonic nebulization, J. Mater. Res., 1996, vol. 11, no. 10, pp. 2583–2587.10.1557/JMR.1996.0324 ↗
7. Baek, M.K., Park, S.J., and Choi, D.J., Synthesis of zirconia (ZrO2) nanowires via chemical vapor deposition, J. Cryst. Growth, 2017, vol. 459, pp. 198–202.10.1016/j.jcrysgro.2016.12.033 ↗
8. Das, D., Bagchi, B., and Basu, R.N., Nanostructured zirconia thin film fabricated by electrophoretic deposition technique, J. Alloys Compd., 2017, vol. 693, pp. 1220–1230.10.1016/j.jallcom.2016.10.088 ↗
9. Mishra, M., Kuppusami, P., Singh, A., Ramya, S., Sivasubramanian, V., and Mohandas, E., Phase evolution in zirconia thin films prepared by pulsed laser deposition, Appl. Surf. Sci., 2012, vol. 258, no. 12, pp. 5157–5165.10.1016/j.apsusc.2012.01.160 ↗
10. Lu, J., Elam, J.W., and Stair, P.C., Atomic layer deposition— sequential self-limiting surface reactions for advanced catalyst “bottom-up” synthesis, Surf. Sci. Rep., 2016, vol. 71, no. 2, pp. 410–472.10.1016/j.surfrep.2016.03.003 ↗
11. Cai, X., Xu, Y., Zhao, N., Zhong, L., Zhao, Z., and Wang, J., Investigation of the adhesion strength and deformation behavior of in situ fabricated NbC coatings by scratch testing, Surf. Coat. Technol., 2016, vol. 299, pp. 135–142.10.1016/j.surfcoat.2016.05.004 ↗
12. Zawischa, M., Makowski, S., Schwarzer, N., and Weihnacht, V., Scratch resistance of superhard carbon coatings—a new approach to failure and adhesion evaluation, Surf. Coat. Technol., 2016, vol. 308, pp. 341–348.10.1016/j.surfcoat.2016.07.109 ↗
13. Moulzolf, S.C., Lad, R.J., and Blau, P.J., Microstructural effects on the friction and wear of zirconia films in unlubricated sliding contact, Thin Solid Films, 1999, vol. 347, nos. 1–2, pp. 220–225.10.1016/S0040-6090(99)00046-2 ↗
14. Lee, H., Yao, C.K., Liao, J.D., Shao, P.L., Thi, M.H.N., Lin, Y.H., and Juang, Y.D., Annealed thin-film zirconia coating adhered on 316L stainless steel as a bio-inert indwelling needle, Mater. Des., 2015, vol. 88, pp. 651–658.10.1016/j.matdes.2015.09.027 ↗
15. Degonzalez, C.O. and Garcia, E.A., An X-ray photoelectron spectroscopy study of the surface oxidation of zirconium, Surf. Sci., 1987, vol. 193, no. 3, pp. 305–320.10.1016/0039-6028(88)90438-4 ↗
16. Scherge, M. and Gorb, S., Biological Micro and Nanotribology, New York: Springer-Verlag, 2001, pp. 49–51.10.1007/978-3-662-04431-5 ↗
17. Holmberg, K. and Matthews, A., Coatings Tribology, Vol. 56: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Amsterdam: Elsevier, 2009, pp. 131–132.