Wear mechanism and chemical composition optimization of complex-alloyed cast iron with spheroidal vanadium carbide under conditions of abrasive erosion
Source abstract
Abstract
Using full factorial design in experiment 32, the contents of vanadium and chromium in heattreated V–Cr–Mn–Ni cast irons with spheroidal vanadium carbide have been optimized with regard to the conditions of quartz sand erosion. It has been found that, in the case of bulk quenching from 760°C (or in combination with a subsequent plasma surface hardening), the maximum wear resistance of cast iron is achieved at 5.0% V and 2.0–4.5% Cr and, in the case of bulk quenching from 840°C followed by cryogenic treatment (–196°C), at 5.0% V and 7.0–9.0% Cr. It has been shown that the wear mechanism of the investigated alloys consists of the repeated deformation (indentation) of the matrix accompanied with spalling of spheroidal carbides and with chipping of eutectic carbides. Spheroidal vanadium carbides provide an effective protection of dendrites regions against erosion due to their uniform distribution in the bulk of the alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Kawano, Y., Nishiuchi, S., Sugawara, K., and Yamamoto, S, Corrosion and wear resistance of high V–Cr–Ni cast iron with spheroidal carbides, J. Jpn. Foundry Eng. Soc., 1999, vol. 71, pp. 727–732.
2. Efremenko, V.G., Shimizu, K., Cheiliakh, A.P., Kozarevs’ka, T.V., Chabak, Yu.G., Hara, H., and Kusumoto, K, Abrasive wear resistance of spheroidal vanadium carbide cast irons, J. Frict. Wear, 2013, vol. 34, no. 6, pp. 466–474.10.3103/S1068366613060068 ↗
3. Xinba, Y., Shimizu, K., Matsumoto, H., Kitsudo, T., and Momono, T, Erosive wear characteristics of spheroidal carbides cast iron, Wear, 2008, vol. 264, pp. 247–257.
4. Wang, Y.P., Li, D.Y., Parent, L., and Tian, H, Performances of hybrid high-entropy high-Cr cast irons during sliding wear and air-jet solid-particle erosion, Wear, 2013, vol. 301, pp. 390–397.10.1016/j.wear.2012.12.045 ↗
5. Efremenko, V., Shimizu, K., and Chabak, Yu., Effect of destabilizing heat treatment on solid-state phase transformation in high-chromium cast irons, Metall. Mater. Trans. A, 2013, vol. 44, pp. 5434–5446.10.1007/s11661-013-1890-9 ↗
6. Malinov, L.S, Improvement of properties of steels and durable cast-iron by inclusion of metastable austenite in the structure and self-hardening effect at the load, Metally (Moscow), 1999, no. 6, pp. 67–76.
7. Koval’, A.D., Efremenko, V.G., Brykov, M.N., Andrushchenko, M.I., Kulikovskii, R.A., and Efremenko, A.V., Principles for developing grinding media with increased wear resistance. Part 1. Abrasive wear resistance of iron-based alloys, J. Frict. Wear, 2012, vol. 33, no. 1, pp. 39–46.10.3103/S1068366612010072 ↗
8. Fang, M., Liu, F., Min, X., Huang, Z., Liu, Y., Wu, X., Tang, C., Zhang, L., and Peng, F, Effect of temperature on solid particle impact erosion wear mechanism of 5 mol % Yttria Stabilized Zirconia ceramics, Ceram. Int., 2015, vol. 41, pp. 6807–6811.10.1016/j.ceramint.2015.01.128 ↗
9. Ram Prabhu, T, Effects of solid lubricants, load, and sliding speed on the tribological behavior of silica reinforced composites using design of experiments, Mater. Des., 2015, vol. 77, pp. 149–160.
10. Novik, F.S. and Arsov, Ya.B., Optimizatsiya protsessov tekhnologii metallov metodami planirovaniya eksperimentov (Optimization of the Metal Technologies by Accurate Experiment Planning), Moscow: Mashinostroenie, 1980.
11. Efremenko, V.G., Shimizu, K., Pastukhova, T.V., Chabak, Yu.G., Kusumoto, K., and Efremenko, A.V, Effect of bulk heat treatment and plasma surface hardening on the microstructure and erosion wear resistance of complex-alloyed cast irons with spheroidal vanadium carbides, J. Frict. Wear, 2017, vol. 38, no. 1, pp. 17–23.10.3103/S1068366617010056 ↗