Vibration and noise in brake systems of mobile vehicles. Part 3: Forced low-frequency vibration (A Review)
Source abstract
Abstract
The paper presents a review of studies of forced low-frequency vibration and noise in brakes. A phenomenological classification of brake noise is given. Ideas on the mechanisms of the origination of low-frequency vibration and the corresponding methods of study are considered. Reduction of the low-frequency vibroactivity of brakes is analyzed from the viewpoint of design factors and the development of tribological materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Vehicle Noise and Vibration Control · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Jacobbson, H., Aspects of Disc Brake Judder, Proc. Inst. Mech. Eng., Part D: Automobile Eng., 2003, vol. 217, pp. 419–430.10.1243/095440703766518069 ↗
2. Desplanques, Y. and Degallaix, G., Interactions between Third-Body Flows and Localization Phenomena during Railway High-Energy Stop Braking, Proc. 26th Brake Colloquium and Exhibition, SAE Paper, 2008-01-2583, 2008.10.4271/2008-01-2583 ↗
3. Sergienko, V.P., Bukharov, S.N., and Kupreev, A.V., Noise and Vibration in Brake Systems of Vehicles. Part 1: Experimental Procedures (Review), J. Friction Wear, 2008, No. 3, pp. 234–241.10.3103/S1068366608030136 ↗
4. Liu, W. and Pfeifer, J.L., Introduction to Brake Noise and Vibration, in Honeywell Friction Materials, 2003. http://www.sae.org/events/bce/honeywell-liu.pdf
5. Jacobsson, H., Frequency Sweep Approach to Brake Judder. Part A: The Brake Judder Phenomenon. Classification and Problem Approach, Licentiate Thesis, Chalmers Univ. Techn., Goteborg, 1998.
6. Abdelhamid, M.K., Creep Groan of Disk Brakes, SAE Paper, 951282, 1995.10.4271/951282 ↗
7. Ouyang, H. and Mottershead, J.E., Friction-Induced Parametric Resonances in Disc: Effect of a Negative Friction-Velocity Relationship, J. Sound Vibration, 1998, No. 2, pp. 251–264.10.1006/jsvi.1997.1261 ↗
8. Kragel’skii, I.V. and Gittis, N.V., Friktsionnye avtokolebaniya (Friction Autovibrations), Moscow: Nauka, 1987.
9. Sergienko, V.P. and Bukharov, S.N., Noise and Vibration in Brake Systems of Vehicles. Part 2: Theoretical Prediction Procedures (a Review), J. Friction Wear, 2009, No. 3, pp. 216–226.10.3103/S1068366609030106 ↗
10. Bae, J.C. and Wickert, J.A., Free Vibration of Coupled Disk-Hat Structures, J. Sound Vibration, 2000, No. 1, pp. 117–132.10.1006/jsvi.2000.2914 ↗
11. Donley, M. and Chung, C.H., Mode Coupling Phenomenon of Brake Squeal Dynamics, SAE Paper 2003-01-1624, 2003.
12. Ouyang, H., Nack, W., Yuan, Y., and Chen, F., Numerical Analysis of Automotive Disc Brake Squeal: a Review, Int. J. Vehicle Noise and Vibration, 2005, Nos. 3/4, pp. 207–231.10.1504/IJVNV.2005.007524 ↗
13. Kao, T.K., Richmond, J.W., and Douarre, A., Brake Disc Hot Spotting and Thermal Judder: An Experimental and Finite Element Study, Int. J. Veh. Des., 2000, Nos. 3/4, pp. 276–296.10.1504/IJVD.2000.001896 ↗
14. Augsburg, K., Brunner, H., and Grochowicz J., Untersuchungen zum Rubbelverhalten von Pkw-Schwimmsattelbremser, Automobiltechnische Z., 1999, B. 101, H. 1, S. 22–30.10.1007/BF03224243 ↗
15. Stringham, W., Jank, P., Pfeifer, J., and Wang, A., Brake Roughness-Disc Brake Torque Variation, Rotor Distortion and Vehicle Response, SAE Paper 930803, 1993.10.4271/930803 ↗
16. Engel, H.G., Bachman, Th., Eichhorn, U., and Saame, Ch., Dynamical Behavior of Brake-Disc Geometry as Cause of Brake Judder, Proc. EAEC 4th Int. Conf. on Vehicle and Traffic System Technology, Strasbourg, 1993, No. 1, pp. 456–481.
17. Kao, T.K., Richmond, J.W., and Moore, M.W., The Application of Predictive Techniques to Study Thermo-Elastic Instability of Brakes, SAE Paper 942087, 1994.10.4271/942087 ↗
18. Sergienko, V.P., Tseluev, M.Yu., Kupreev, et al., Thermal Regime of Multidisc Oil-Cooled Brake Work, Mekhanika Mashin, Mekhanizmov i Materialov, 2009, vol. 9, no. 4, pp. 39–46.
19. Anderson, A.E. and Knapp, R.A., Hot Spotting in Automotive Friction Systems, Wear, 1990, vol. 135, pp. 319–337.10.1016/0043-1648(90)90034-8 ↗
20. Barber, J.R., Thermoelastic Instabilities in the Sliding of Conforming Solids, Proc. Royal Society. Ser. A, 1969, vol. 312, pp. 381–394.10.1098/rspa.1969.0165 ↗
21. Richmond, J.W., Kao, T.K., and Moore, M.W., The Development of Computational Analysis Techniques for Disc Brake Pad Design, in Advances in Automotive Braking Technology, Barton, D.C., Ed., London: London MEP, 1996.
22. Inoue, H., Analysis of Brake Judder Caused by Thermal Deformation of Brake Disc Rotors, Proc. 21st FISITA Congress, Belgrade, 1986, paper 865131, pp. 213–219.
23. Aviles, R., Hennequet, G., Hernandez, A., and Llorente, L.I., Low Frequency Vibrations in Disc Brakes at High Car Speed. Part I. Experimental Approach, Int. J. Veh. Des., 1995, vol. 16, no. 6, pp. 542–555.
24. Steffen, T. and Bruns, R., Hotspotsbildung bei Pkw Bremsscheiben, Automobiltechnische Z., 1998, B. 100, H. 6, S. 408–413.10.1007/BF03221499 ↗
25. Kao, T.K., Richmond, J.W., and Douarre, A., Brake Disc Hot Spotting and Thermal Judder: An Experimental and Finite Element Study, Int. J. Veh. Des., 2000, Nos. 3/4, pp. 276–296.10.1504/IJVD.2000.001896 ↗
26. Abendroth, H., Steffen, T., Falter, W., and Heidt, R., Investigation of CV Rotor Cracking Test Procedures, Proc. Int. Conf. on Automotive Braking-Technologies for the 21st Century (Brakes 2000), London, 2000, pp. 149–162.
27. http://www.eurac-group.com/documents/thermaljud-der.doc
28. Sergienko, V.P., Bukharov, S.N., and Kupreev, A.V., Tribotechnical Processes on Contact Surfaces in Oil-Cooled Friction Pairs, Doklady Nat. Akad. Nauk Belarusi, 2007, vol. 51, no. 4, pp. 86–89.
29. Sterne, D.D., Monitoring Brake Disc Distortions Using Lasers, IMechE Seminar paper C399/34, 1989.
30. Brooks, P.C., Barton, D., Crolla, D.A., et al., D.R., A New Approach to Disc Brake Judder Using a Thermo-Mechanical Finite Element Model, IMechE paper C462/31/064, 1993.
31. Gassman, S. and Engel, H.G., Excitation and Transfer Mechanism of Brake Judder, SAE Paper 931880, 1993.10.4271/931880 ↗
32. Grieve, D.G., Barton, D.C., Crolla, D.A., and Buckingham, J.K., Design of a Lightweight Automotive Brake Disc Using Finite Element and Taguchi Techniques, Proc. Inst. Mech. Eng. Part D. Automobile Engineering, 1998, vol. 212, pp. 245–254.10.1243/0954407981525939 ↗
33. Thuresson, D., Thermomechanical Analysis of Friction Brakes, SAE Paper 2000-01-2775, 2000.10.4271/2000-01-2775 ↗
34. Haigh, M.J., Smales, H., and Abe, M., Vehicle Judder under Dynamic Braking Caused by Disc Thickness Variation. IMechE Paper C444/022/93, 1993.
35. Borjesson, M., Eriksson, P., Kuylenstierna, C., Nilsson, P.H., and Hermansson, T., The Role of Friction Films in Automotive Brakes Subjected to Low Contact Forces, IMechE Paper C444/026, 1993.
36. Jacobsson, H., Wheel Suspension Related Disc Brake Judder, Proc. of ASME Design Eng. Tech. Conf., Sacramento, 1997.10.1115/DETC97/VIB-4165 ↗
37. De Vries, A. and Wagner, M., The Brake Judder Phenomenon, SAE Paper 920554, 1992.10.4271/920554 ↗
38. Bosworth, R., Investigations of Secondary Ride Aspects of Steering Wheel Vibration (Shimmy and Judder) Using Taguchi Methodology, IMechE Paper C399/9, 1989.
39. Kim, M., Jeong, H., and Yoo, W., Sensitivity Analysis of Chassis System to Improve Shimmy and Brake Judder Vibration on Steering Wheel, SAE Paper 960734, 1996.10.4271/960734 ↗
40. Kao, T.K., Richmond, J.W., and Moore, M.W., Computational Analysis of Pad Performance, IMechE Paper C444/027/93, 1993.
41. Abdelhamid, M.K., Brake Judder Analysis: Case Studies, SAE Paper 972027, 1997.10.4271/972027 ↗
42. Jacobsson, H., Analysis of Brake Judder by Use of Amplitude Functions, SAE Paper 1999-01-1779, 1999.10.4271/1999-01-1779 ↗
43. Valvano, T. and Lee, K., An Analytical Method to Predict Thermal Distortion of a Brake Rotor, SAE Paper 2000-01-0445, 2000.10.4271/2000-01-0445 ↗
44. Brooks, P.C., Barton, D., Crolla, D.A., et al., A Study of Disc Brake Judder Using a Fully Coupled Thermo-Mechanical Finite Element Model, Proc. 25th FISITA Congress, Beijping, 1994, pp. 340–349.
45. Floquet, A. and Dubourg, M.-C., Realistic Braking Operation Simulation of Ventilated Disc Brakes, Trans. ASME, J. Tribology, 1996, vol. 118, pp. 466–472.10.1115/1.2831559 ↗
46. Martin, R.H. and Bowron, S., Composite Materials in Transport Friction Applications, Proc. Int. Conf. on Automotive Braking-Technologies for the 21st Century (Brakes 2000), London, 2000, pp. 207–216.
47. Daudi, A.R., Dickerson, W.E., and Narain, M., Hayes’ Increased Air Flow Rotor Design, Proc. 2nd Int. Sem. on Automotive Braking’ Recent Developments and Future Trends’, Leeds, 1998, pp. 127–143.
48. Hudson, M.D. and Ruhl, R.L., Ventilated Brake Rotor Air Flow Investigation, SAE Paper 971033, 1997.10.4271/971033 ↗
49. Crolla, D.A. and Lang, A.M., Brake Noise and Vibration-the State of the Art, Vehicle Tribology, Tribology Series, 1991, vol. 18, pp. 165–174.10.1016/S0167-8922(08)70132-9 ↗
50. Engel, H.G., Hassiotis, V., and Tiemann, R., System Approach to Brake Judder, Proc. 25th FISITA Congress, Beijping, 1994, vol. 1, pp. 332–339, Paper 945041.
51. Abdelhamid, M.K., Brake Judder Analysis Using Transfer Functions, SAE Paper 973018, 1997.10.4271/973018 ↗
52. Aviles, R., Hennequet, G., Amezua, E., and Vallejo, J., Low Frequency Vibrations in Disc Brakes at High Car Speed. Part II: Mathematical Model and Simulation, Int. J. Veh. Des. 1995, no. 6, pp. 556–569.
53. Hodges, T., Development of Refined Friction Materials, Proc. 5th Int. Symp. of Friction Products and Materials, Yaroslavl, 2003, pp. 203–208.
54. Koetniyom, S., Brooks, P.C., and Barton, D.C., Finite Element Prediction of Inelastic Strain Accumulation in Castiron Brake Rotors, Proc. Int. Conf. on Automotive Braking-Technologies for the 21st Century (Brakes 2000), London, 2000, pp. 139–148.
55. Krupka, R. and Kienzle, A., Fiber Reinforced Ceramic Composite for Brake Discs, SAE Paper 2000-01-2761, 2000.10.4271/2000-01-2761 ↗
56. Eggleston, D., Cold Judder. Eurac Techical Bulletin 00029711 1999. http://www.eurac-group.com/papers.html. Accessed May 21, 2012.
57. Palmer, B.B. and Weintraub, M.H., The Role of Engineered Cashew Particles on Performance, Proc. Int. Conf. on Automotive Braking-Technologies for the 21st Century (Brakes 2000), London, 2000, pp. 185–195.
58. Kim, S., Lee, S., Park, B., and Rhee, S., A Comprehensive Study of Humidity Effects on Friction, Pad Wear, Disc Wear, DTV, Brake Noise and Physical Properties of Pads, SAE Paper 2011-01-2371, 2011.10.4271/2011-01-2371 ↗
59. Wirth, A. and Whitaker, R., An Energy Dispersive X-ray and Imaging X-ray Photoelectron Spectroscopical Study of Transfer Film Chemistry and Its Influence on Friction Coefficient, Phys. J. D: Appl. Phys. 1992, vol. 25, pp. A38–A43.10.1088/0022-3727/25/1A/008 ↗
60. Wirth, A., Stone, K., and Whitaker, R., A Study of the Relationship between Transfer Film Chemistry and Friction Performance in Automotive Braking Systems, SAE Paper 922541, 1992.10.4271/922541 ↗
61. Wirth, A., Whitaker, R., Turners, S., and Fixter, G., X-ray Photoelectron Spectroscopy Characterization of Third Body Layers Formed during Automotive Friction Braking, J. Electron Spectr. Rel. Phenom., 1994, vol. 68, pp. 675–683.10.1016/0368-2048(94)80031-6 ↗
62. Wirth, A., Eggleston, D., and Whitaker, R., A Fundamental Tribochemical Study of the Third-Body Layer Formed during Automotive Friction Braking, Wear, 1994, vol. 179, pp. 75–81.10.1016/0043-1648(94)90222-4 ↗
63. Meyer, R., Brake Judder — Analysis of the Excitation and Transmission Mechanism within the Coupled System Brake, Chassis and Steering System, SAE Paper 2005-01-3916, 2005.10.4271/2005-01-3916 ↗
64. Singh, A. and Lukianov, G., Simulation Process to Investigate Suspension Sensitivity to Brake Judder, SAE Paper 2007-01-0590, 2007.10.4271/2007-01-0590 ↗
65. Zhang, L., Meng, D., and Yu, Z., Theoretical Modeling and FEM Analysis of the Thermo-Mechanical Dynamics of Ventilated Disc Brakes, SAE Paper 2010-01-0075, 2010.10.4271/2010-01-0075 ↗
66. Jardim, F. and Tamagna, A., Study of the Relationship between DTV, BTV and BPV over Judder-Type Vibration of Disc Brake Systems, SAE Paper 2010-01-1694, 2010.10.4271/2010-01-1694 ↗