Frictional heat problem and its evolution. Part 1. Blok model and its improvement
Source abstract
Abstract
The paper reviews the main stages of the formulation, development, and improvement of the frictional heat problem. At present its evolution enables to proceed from problems for a local contact spot to problems for specific full-sized friction units. Features of the consideration of some basic parameters when formulating and solving analytically the frictional heat problem for tooth gears are discussed and the real values of the essential parameters are specified. These parameters are the contact duration factor, the temperature flash duration, and the real temperatures capable of inducing structural and phase transformations in surface and subsurface layers of the mated parts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Hydraulic and Pneumatic Systems · Dynamics and Control of Mechanical Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Bowden, F.P. and Ridler, K.E.W., A Note on the Surface Temperature of Sliding Metals, Proc. Cambridge Philos. Soc., 1935, pt. 3, no. 3, pp. 431–445.10.1017/S0305004100077501 ↗
2. Bowden, F.P. and Tabor, D., The Area of Contact between Stationary and Moving Surfaces, Proc. Roy. Soc., Ser. A, 1939, no. 169, pp. 391–413.10.1098/rspa.1939.0005 ↗
3. Blok, H., The Dissipation of Frictional Heat, Applied Scientific Research, Section A, 1955, nos. 2–3, pp. 151–181.10.1007/BF03184615 ↗
4. Blok, H., Afvoer van Wrijvingswarmte, Voordrachten Kon. Inst. van Ingenieurs, 1950, no. 2, pp. 84–114.
5. Blok, H., Study of Thermal Regime in Friction, Prikl. Mekh. i Mashinostroenie, 1956, no. 3, pp. 28–42.
6. Blok, H., Thermo-Tribology — Fifty Years on, Proc. Int. Conf. on Tribology “Friction, Lubrication and Wear”, London, 1987, vol. 1, pp. 1–8.
7. Korovchinskii, M.V., Foundations of Theory of Thermal Contact at Local Friction, in Novoe v teorii treniya (News in Friction Theory), Moscow, 1966, pp. 98–145.
8. Korovchinskii, M.V., Foundations of Theory of Thermal Contact at Local Friction, in Novoe v teorii treniya (News in Friction Theory), Moscow, 1968, pp. 5–72.
9. Shul’ts, V.V., Forma estestvennogo iznosa detalei mashin i instrumenta (Shape of Natural Wear of Machine Parts and Tools), Leningrad: Mashinostroenie, 1990.
10. Trenie, iznos, smazka (tribologiya i tribotekhnika), (Friction, Wear, and Lubrication (Tribology and Triboengineering)), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2003.
11. Osnovy tribologii (trenie, iznos, smazka) (Fundamentals of Tribology (Friction, Wear, and Lubrication)), Chichinadze, A.V., Ed., Moscow: Mashinostroenie, 2001.
12. International Technical Report ISO/CD 13989-1, ISO/TC-60, no. 630.
13. Jaeger, J.C., Moving Sources of Heat and the Temperature of Sliding Contact, Proc. of Royal Society of New South Wales, 1942, pt. III, vol. 76, pp. 203–224.
14. Jaeger, J.C., Moving Sources of Heat and Frictional Temperature, Prikl. Mekh. i Mashinostroenie, 1952, no. 6, pp. 22–39.
15. Shchedrov, V.S., Sliding Contact Temperature, in Trenie i iznos v mashinakh (Friction and Wear in Machines), Moscow, 1955, issue 10, pp. 155–296.
16. Genkin, M.D., Kuz’min, N.F., and Misharin, Yu.A., Voprosy zaedaniya zubchatykh koles (Problems of Seizure of Tooth Gears), Moscow: Akad. Nauk SSSR, 1959.
17. Chichinadze, A.V., Enlarged Session on Improving Wear Resistance of Brake and Frictional Units of Machines, Vestn. Mashinostroeniya, 1952, no. 11, 85–87.
18. Kragel’skii, I.V. and Chichinadze, A.V., Method of Testing of Brake Materials in New Friction Machine I-47, Zavodskaya Laboratoriya, 1954, no. 5, pp. 607–610.
19. Kragel’skii, I.V., Chupilko, G.G., and Chichinadze, A.V., Protsessy treniya v tormozakh aviakoles. Podbor friktsionnykh par (Friction Processes in Aircraft Brakes. Selection of Friction Pairs), Moscow: Mashinostroenie, 1955.
20. Chichinadze, A.V. and Troyanovskaya, G.I., Temperaturnoe pole, koeffitsient treniya i iznosa friktsionnykh par (Temperature Field and Friction and Wear Coefficients of Friction Pairs), Moscow: Mashinostroenie, 1957.
21. Gurskii, B.E., Determination of Zones of Minimal Contact Endurance of Teeth, Vestn. Mashinostroeniya, 1990, no. 2, pp. 31–33.
22. Gurskii, B.E., Prediction of Zones of Minimal Durability of Teeth at Seizure, Problemy Mashinostroeniya i Nadezhnosti Mashin, 1997, no. 2, pp. 74–80.
23. Chichinadze, A.V. and Braun, E.D., Frictional Devices, in Trenie, iznashivanie i smazka (Friction, Wear, and Lubrication), Kragel’skii, I.V. and Alisin, V.V., Eds., Moscow: Mashinostroenie, 1979, vol. 2, pp. 230–257.
24. Chichinadze, A.V., Braun, E.D., Ginzburg, A.G., and Ignat’eva, Z.V., Development of Calculation Methods of Performance Characteristics of Frictional Units at Their Designing, in Issledovaniya po tribotekhnike (Tribology Studies), Chichinadze, A.V., Ed., Moscow: NIIInformash, 1975, pp. 88–96.
25. Lyubarskii, I.M., Povyshenie iznosostoikosti tyazhelonagruzhennykh shesteren (Improvement of Wear Resistance of Heavy-Duty Gears), Moscow: Mashinostroenie, 1970.
26. Lyubarskii, I.M. and Palatnik, L.S., Metallofizika treniya (Metallophysics of Friction), Moscow: Metallurgiya, 1976.
27. Oding, I.A. and Ivanova, V.S., On Process of Metal Failure in Creep, Dokl. Akad. Nauk SSSR, 1955, vol. 3, no. 1, pp. 77–80.
28. Rozenberg, Yu.A., Vliyanie smazochnykh maselna dolgovechnost’ i nadezhnost’ detalei mashin (Effect of Lubricating Oils on Durability and Reliability of Machine Parts), Moscow: Mashinostroenie, 1970.
29. Metallovedenie i termicheskaya obrabotka. Spravochnik (Metallurgy and Heat Treatment. Handbook), Moscow: Metallurgizdat, 1961.
30. Ziner, K., Elasticity and Non-Elasticity of Metals, Uprugost’ i Neuprugost’ Metallov, 1954, pp. 9–168.
31. Ke-Tin-Suy, Internal Friction in Metals at Extremely High Temperatures, Uprugost’ i Neuprugost’ Metallov, 1954, pp. 325–337.
32. Salli, A., Polzuchest’ metallov i zharoprochnye splavy (Creep of Metals and Heat-Resistant Alloys), Moscow: Oborongiz, 1953.
33. Dekhtyar, I.A., Osipova, K.A., On Failure of Metals at Elevated Temperatures, Dokl. Akad. Nauk SSSR, 1956, vol. 4, no. 2, pp. 229–232.
34. Ivanova, V.S., Ustalostnoe razrushenie metallov (Fatigue Fracture of Metals), Moscow: Metallurgizdat, 1963.
35. Zhurkov, S.N. and Tomashevskii, E.E., Time Dependence of Strength under Different Loading Conditions, in Nekotorye problemy prochnosti tverdogo tela (Some Problems of Solid Strength), Moscow: Izd. Akad. Nauk SSSR, 1959, pp. 68–75.
36. Regel’, V.R., Slutsker, A.I., and Tomashevskii, E.E., Kinematicheskaya priroda prochnosti tverdykh tel (Kinematic Nature of Solid Strength), Moscow: Nauka, 1974.
37. Gurskii, B.E., Modification of Blok’s Model for Real-Sized Joints, J. of Friction and Wear, 1999, vol. 20, no. 1, pp. 43–48.
38. Gurskii, B.E., Determination of Heat Partition Factors in Tooth Gearing, Vestn. Mashinostroeniya, 1997, no. 6, pp. 12–16.
39. Kuznetsov, V.D., Fizika rezaniya i treniya metallov i kristallov. Izbrannye trudy (Physics of Cutting and Friction of Metals and Crystals, Selected Works), Moscow: Nauka, 1977.
40. Akhmatov, A.S., Molecular Physics of Boundary Lubrication, Israel Program for Scientific Translation, 1966.
41. Chichinadze, A.V. and Ginzburg, A.G., Heat Dynamics of Friction in Tooth Gearings, in Materialy v tribotekhnike nestatsionarynkh protsessov (Materials in Tribology of Non-Stationary Processes), Moscow: Nauka, 1988, pp. 169–173.
42. Gurskii, B.E., On Duration of Temperature Flash in Engagements of Evolvent Teeth, Problemy Mashinostroeniya i Nadezhnosti Mashin, 2002, no. 2, pp. 101–105.
43. Grozin, B.D., Iznos metallov (Wear of Metals), Kiev: Gostekhizdat USSR, 1951.
44. Polyakov, N.V. and Chichinadze, A.V., Study of Oil Film Screening Action in Friction Pairs, J. of Friction and Wear, 1983, vol. 4, no. 4, pp. 17–22.
45. Blok, H., Measurements of Temperature Flashes on Gear Teeth under Extreme Pressure Conditions, Proc. Gen. Disc. on Lubrication. Inst. Mech. Eng., 1937, no. 2, pp. 18–22.
46. Carslaw, H.S. and Jaeger, J.C., Conduction of Heat in Solids, Oxford: Clarendon Press, 1959.
47. Holm, R., Temperature in Heating Contact as Applied to Sliding Friction, J. Appl. Phys., 1953, no. 4, pp. 23–35.
48. Fazekas, G.A.G., Temperature Gradient and Heat Stresses in Brake Drums, SAE Trans., 1953, p. 65–81.10.4271/530234 ↗
49. Kragel’skii, I.V., Friction and Wear, Elmsford: Pergamon, 1982.
50. Chichinadze, A.V., Buyanovskii, I.A., and Gurskii, B.E., Transition Diagrams and Screening Effect of the Lubricating Film, J. of Friction and Wear, 2002, vol. 23, no. 3, pp. 90–97.
51. Fridman, L.Yu., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: Mashinostroenie, 1974.
52. Reshetov, D.N., Rabotosposobnost’ i nadezhnost’ detalei mashin (Efficiency and Reliability of Machine Parts), Moscow: Vysshaya Shkola, 1974.
53. Zhuravlev, V.N. and Nikolaeva, O.I., Mashinostroitel’nye stali (Machine-Building Steels), Moscow: Mashinostroenie, 1981.
54. Kravz-Tarnavskii, V.P., Specific Strip in Steel, Zhurnal Russkogo Metallurgicheskogo Obshchestva, 1928, no. 3, pp. 162–167.
55. Larin, T.V. and Devyatkin, V.P., On Nature of Spalling of Railway Wheel Treads, in Kontaktnaya prochnost’ mashinostroitel’nykh materialov (Contact Strength of Machine-Building Materials), Moscow: Nauka, 1964, pp. 147–157.
56. Zamoruev, G.M., Phase Transformations in Steel in Friction and Wear, in Trenie i iznos v mashinakh (Friction and Wear in Machines), Moscow: Izd. Akad. Nauk SSSR, 1956, issue 11, pp. 211–237.
57. Kuritsyna, A.D., On Origin of “White Phase” on Friction Surface, in Trenie i iznos v mashinakh (Friction and Wear in Machines), Moscow: Izd. Akad. Nauk SSSR, 1956, issue 11, pp. 182–203.
58. Lyuttsau, V.G., X-Ray Study of “White Crust” on Friction Surface, in Trenie i iznos v mashinakh (Friction and Wear in Machines), Moscow: Izd. Akad. Nauk SSSR, 1956, issue 11, pp. 204–209.
59. Ivanova, V.S., Structure-Energy Interpretation of Phenomenon of Metal Fatigue, Dokl. Akad. Nauk SSSR. Metallurgiya i Toplivo, 1963, no. 1, pp. 93–100.
60. Melamedov, I.M., Fizicheskie osnovy nadezhnosti (Physical Principles of Reliability), Leningrad: Energiya, 1970.
61. Kostetskii, B.I., Structure-Energy Theory of Friction, Lubrication, and Wear, in Nadezhnost’ i dolgovechnost’ mashin i sooruzhenii (Reliability and Durability of Machines and Structures), Kiev: Naukova Dumka, 1986, issue, 9, pp. 45–49.
62. Blyumen, A.V., Kurapov, N.A., and Kharach, G.M., Contact Rigidity of Face Friction Pair during Running-In, in Raschetno-eksperimental’nye metody otsenki treniya i iznosa (Calculation and Experimental Method of Assessment of Friction and Wear), Moscow: Nauka, 1980, pp. 31–33.