journal article·2013-11

Studying colloidal greases with hard nanoparticles of aluminum silicates used to reduce wear of steel friction pairs

V. V. Alisin, B. V. Pokid’ko, M. N. Roshchin, T. V. Silova, G. A. Simakova

Journal of Friction and Wear· Volume 34· Issue 6
Publisher page

Abstract

Electron diffraction analysis was used to study the dispersion of natural bentonite particles accompanied by the formation of nanoparticles of aluminum silicates and the rheological behavior of these colloidal systems was investigated. Based on these results, an additive to grease has been proposed, which was highly efficient in terms of improving the wear resistance of lubricated steel surfaces. This additive was produced by the chemical disintegration of modified natural aluminum silicates and their homogeneous distribution in the bulk of the grease using the resonance method. The effect of the amount of the antifriction additive to the grease on the wear resistance of steel specimens was studied. Improving the wear resistance of lubricated steel surfaces was due to the use of the antiwear additive that contained available and inexpensive components. The proposed grease is promising for lubricating the rail-wheel contact, especially in high-speed railway transport.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Adsorption, diffusion, and thermodynamic properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Kravchenko, O.V., Suvorova, I.G., Momot, V.I., and Veligotskii, D.A., Cryogenic technology of ultrasidpersed composite additive production to lubricant materials, Vost.-Evrop. Zh. Pered. Tekhnol. Sovrem. Tekhnol. Gazoturbostr., 2010, vol. 45, pp. 55–59.
2. Ganiev, R.F., Volnovye mashiny i tekhnologii (vvedenie v volnovuyu tekhnologiyu), (Wave Machines and Technologies (Introduction into Wave Technology)), Moscow: Regulyar. Khaotich. Dinam., 2008.
3. Alisin, V.V., Resonance technology in the synthesis of lubricant materials on the basis of stable dispersions of solid nanoparticles. Oscillations and waves in mechanical systems, in Mater. mezhdunar. nauch. konf. (Proc. Int. Sci. Conf.), Moscow: Inst. Komp. Issl., 2012.
4. Alisin, V.V., Pokid’ko, B.V., and Simakova, G.A., A new class of lubricants based on stable dispersions of solid nanosized powders, J. Friction Wear, 2012, vol. 33, pp. 1–4.10.3103/S1068366612010023 ↗
5. Pokid’ko, B.V., Tutorskii, I.A., Bitt, V.V., Sklyarevskaya, N.M, and Zhuravleva, P.L., Adsorption of alkydimethylbenzylammonium and distearyldimethylammonium chlorides by layered silicates from different deposits and some properties of organobentonites, Colloid. J., 2009, vol. 71, pp. 810–815.10.1134/S1061933X09060106 ↗
6. Simakova, G.A., Solov’eva, T.S., Dulina, O.A., and Vorob’ev, S.I., Effect of disperse phase of emulsion on colloid-chemical and adsorption properties of nonionic surface-active substances, Khim. Tekhnol., 2011, no. 10, pp. 603–606.
7. Dolgopolov, K.N., Lyubimov, D.N., Kozakov, A.T, Nikol’skii, A.V., and Glazunova, E.A., Tribochemical aspects of interactions between high-dispersed serpentine particles and metal friction surface, J. Friction Wear, 2012, vol. 33, pp. 108–114.10.3103/S1068366612020031 ↗
8. Simakova, G.A., Alisin, V.V., Pokid’ko, B.V., and Roshchin, M.N., Creation of scientific foundations of synthesis of new generation of lubricant materials for decreasing of friction pairs wear in technical means of high-speed railway transport. Intellectual systems on transport, in Mater. tret’ei mezhdunar. nauch.-prakt. konf. “IntellektTrans-2013”, (Proc. 3rd Int. Sci.-Pract. Conf. “IntellektTrans-2013”), Moscow: Pero, 2013, pp. 245–252.
9. Goryacheva, I.G., Kurbatkin, I.I., and Bushe, N.A., Simulation of processes of formation of secondary structures film and study of its properties, Zavod. Labor. Diagn. Mater., 2008, vol. 74, pp. 51–58.