journal article·2009-10

Role of nanofiller in friction of polymers based on polycaproamide: Indirect effect

A. P. Krasnov, O. V. Afronicheva, V. A. Mit’, V. B. Bazhenova, T. V. Volkova, O. V. Sinitsyna, Ya. S. Vygodskii, I. A. Rashkovan, M. E. Kazakov

Journal of Friction and Wear· Volume 30· Issue 5
Publisher page

Abstract

The effect of nanofillers (multiwalled carbon nanotubes) on the tribological behavior of polycaproamide is studied when introduced into the polymer by polymerization filling. The introduction of insignificant quantities (∼0.1 wt %) of nanotubes provides their homogeneous distribution in the polymer and contributes to reducing the wear and friction coefficient. This is mainly due to the role of nanotubes as nucleators of the fine spherulitic polycaproamide structure. Such an indirect effect of the nanofiller on the polymer’s tribological behavior is seen when nanotubes are added to the melt in the course of granulation of polycaproamide compositions reinforced by carbon fibers, the effect of nanotubes being reduced with increasing amount of the reinforcing filler.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Carbon Nanotubes in Composites · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Coleman, J.N., Khan, U., Blau, W.J., and Gun’ko, Yu.K., Small but Strong: A Review of the Mechanical Properties of Carbon Nanotube-Polymer Composites, Carbon, 2006, vol. 44, pp. 1624–1652.10.1016/j.carbon.2006.02.038 ↗
2. Rashkovan, I.A., Krasnov, A.P., Kazakov, M.E., et al., Biocompatible Isotropic Carbon Fiber Reinforced Plastic (CFRP) Based on Polyamide-12, Proc. of the Hybrid Materials 2009, Tource: Vinci Convention Centre, ELSEVIER, F2.1.22, 15–19 March 2009.
3. Sinha, S.K., Song, T., Wan, X., and Tong, Y., Scratch and Normal Hardness Characteristics of Polyamide 6/Nano-Clay Composite, Wear, 2009, vol. 266, nos. 7–8, pp. 814–821.10.1016/j.wear.2008.12.010 ↗
4. Naumkin, A.V., Krasnov, A.P., Said-Galiev, E.E., et al., Carbon Dioxide in Surface Layers of Ultrahigh-Molecular Polyethylene, Dokl. Ross. Akad. Nauk, 2008, vol. 419, no. 5, pp. 641–645.
5. Krasnov, A.P., Mit’, V.A., Afonicheva, O.V., et al., The First Nanoporous Polymer Antifriction Metal-Nanocomposites, Tren. Smazka Mashinakh Mekhanizmakh, 2009, no. 2, pp. 23–30.
6. Novikov, Yu.L., Rakov, A.V., and Todua, N.A., The Way to Determine the Scanning Linearity in Atomic-Force Microscope, Tez. dokl. XXII Rossiiskoi konf. po elektronnoi mikroskopii (Proc. XXII Russian Conf. on Electronic Microscopy), Chernogolovka, 2008.
7. Lomonosov, A.M., Filatova, A.G., Batalova, G.L., et al., Research of the Films Made of Polycaproamide Copolymers with Aromatic Polyimides by Means of Atomic Force Microscopy (AFM) and Raster Electron Microscopy (SEM or REM), Izv. Ross. Akad. Nauk, Ser. Fiz., 2005, vol. 69, no. 4, pp. 529–532.
8. Osama Al Khelo, Petukhova, A.V., Osipchik, V.S., and Kravchenko, T.P., Modification of Filled Polypropylene, Plast. Massy, 2009, no. 1, pp. 43–46.
9. Sogolova, T.I., Belyi, V.A., Savkin, V.G., and Kargin, V.A., How the Artificial Nucleations Influence onto Permolecular Structure of Polycaprolactam, Vysokomol. Soedin., 1967, vol. A9, no. 2, pp. 195–199.
10. Korshak, V.V., Genin, Ya.V., Gribova, I.A., Krasnov, A.P., et al., The Structure of Binary Mixtures of Polyimides, Dokl. Akad. Nauk SSSR, 1979, vol. 249, no. 4, pp. 871–873.