journal article·2024-10

Tribotechnical Characteristics of Anti-Friction Material Based on Silver with Added Molybdenum Disulphide

V. B. Balyakin, A. A. Filippov, D. E. Dolgikh

Journal of Friction and Wear· Volume 45· Issue 5
Publisher page

Abstract

Abstract The evaluation of the determination of the friction coefficients and the wear intensity of an anti-friction material based on silver with the addition of molybdenum disulfide is given. The results of studies of the friction coefficients in the contacting pair are presented: SHX-15 steel and antifriction material based on silver with the addition of molybdenum disulfide. The average value of the coefficient of friction at a run of 1200 m, in a pair, a ball made of SHX-15 steel and a ring with a cover made of an antifriction material containing 94% silver and 6% molybdenum disulfide is 0.128 with a standard deviation of 0.006. At a run of 15 000 m, the average coefficient of friction was 0.129 with a standard deviation of 0.01. For a friction pair of an anti-friction material containing 94% silver and 6% molybdenum disulfide and SHX-15 steel, the coefficient of wear intensity of the antifriction surface at a contact voltage of 330 MPa is I = 0.86 × 10–6 mm3/m, and for a counterbody in the form of a steel ball, Ib = 2.85 × 10–8 mm3/m. Since the wear rate of the ball is two orders of magnitude lower than the wear rate of the friction material, the wear of the ball can be ignored in resource calculations. The obtained dependence of the coefficient of wear intensity on the maximum contact stresses will allow us to develop a calculation method for wear spherical articulated bearings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Spherical Plain Bearings, Plain Bushes, Rod Ends. Catalog 238, Herzogenaurach, Germany: INA-Schaeffler KG, 2008.
2. Drozdov, Yu.N., Yudin, E.G., and Belov, A.I., Prikladnaya tribologiya (trenie, iznos, smazka) (Applied Tribology: Friction, Wear, Lubrication), Drozdov, Yu.N., Ed., Moscow: Eko-Press, 2010.
3. Zhil’nikov, E.P. and Samsonov, V.N., Trenie i iznashivanie v uzlakh aviatsionnoi tekhniki (Friction and Wear in the Nodes of Aviation Equipment), Samara: Izdatel’stvo Samarskogo Aerokosmicheskogo Universiteta, 2007.
4. Panin, S.V., Buslovich, D.G., Lo, Ts., Kornienko, L.A., and Aleksenko, V.O., Tribological characteristics of three-component solid lubricant composites based on polyetherimide under conditions of point and linear tribocontacts, Fundamental’nye Problemy Sovremennogo Materialovedeniya, 2022, vol. 19, no. 3, pp. 402–410.
5. Balyakin, V.B., Lavrin, A.V., Baturin, A.P., and Gerasimova, T.A., Investigation of the coefficient of friction of fluoroplast-4 with different surface treatment quality, Izv. Samar. Nauch. Tsentra Ross. Akad. Nauk, 2017, vol. 19, no. 4, pp. 33–36.
6. Babak, V.P., Shchepetov, V.V., and Kharchenko, S.D., Antifriction nanostructural glass-composite self-lubricating coatings, J. Frict. Wear, 2022, vol. 43, no. 3, pp. 215–220. https://doi.org/10.3103/s106836662203002310.3103/s1068366622030023 ↗
7. Balyakin, V.B., Falaleev, S.V., Dolgikh, D.E., and Yurtaev, A.A., Improving the reliability of the RNA system of an aviation gas turbine compressor through the use of molybdenum-coated bushings, Nasosy. Turbiny Sistemy, 2022, vol. 45, no. 4.
8. Belyachenkov, I.O., Schegoleva, N.E., Chainikova, A.S., Vaganova, M.L., and Shavnev, A.A., Silicon nitride ceramic materials for aviation GTE bearings and methods of manufacturing (review), Trudy VIAM, 2019, no. 7, pp. 42–49. https://doi.org/10.18577/2307-6046-2019-0-7-42-4910.18577/2307-6046-2019-0-7-42-49 ↗
9. Kovaleva, M.G., Kolpakov, A.J., Poplavsky, A.I., Galkina, M.E., Gerus, J.V., Lyubushkin, R.A., and Mishunin, M.V., Properties of coatings based on carbon and nitrogen-doped carbon obtained using a pulsed vacuum arc method, J. Frict. Wear, 2018, vol. 39, no. 4, pp. 345–348. https://doi.org/10.3103/S106836661804007410.3103/S1068366618040074 ↗
10. Medvedev, S.D., Falaleev, S.V., Novikov, D.K., and Balyakin, V.B., Povyshenie ekspluatatsionnoi nadezhnosti GPA razvitiem konvertirovannykh aviatsionnykh tekhnologii (Improving the Operational Reliability of GPA by the Development of Converted Aviation Technologies), Samara, 2008.