Abrasive Wear of Rubbers Based on Natural Rubber, Carbon Black, and Polyoxadiazole Fiber
Source abstract
Abstract
Abstract— The influence of the abrasive particle size and modifiers (low molecular weight liquid rubbers (LMWRs), sulfidosilane) on the rate of wear on abrasive paper of rubbers based on natural rubber (NR), carbon black (CB), and polyoxadiazole (POD) fiber is studied as a function of structure and mechanical properties of rubbers. Model rubber blends were prepared in a closed-type mixer, the abrasive wear tests were conducted on a drum-type machine, the structure and the mechanical properties of rubbers were characterized by DMA, static tensile tests, hardness measurements, and tear resistance. The wear surfaces were analyzed by SEM. Tests have shown that the addition of fiber does not affect the rate of abrasive wear of the original NR/CB rubber regardless of the grain size of the abrasive. Addition of modifiers that increase tensile modulus M10, hardness HSh, tear resistance TR, tensile strength A, and degree of crosslinking γ reduces the wear rate under friction on coarse abrasive, which is characteristic of abrasive wear with a predominance of micro-cutting. The greatest influence, judging by the value of the correlation coefficient, is exerted by the value of M10, dependent on the bond strength between the matrix and the fiber, which allows predicting the wear rate of rubbers based on the results of mechanical tests. When worn on a fine abrasive paper, the increase in M10, HSh, TR, and γ on the contrary, raises the wear rate of rubber, and the tensile toughness has practically no effect on it. This is attributed to the predominance of the fatigue wear mechanism, in which the wear rate increases with contact stresses, in proportion to the strength properties, with tear resistance exerting the greater effect on the wear rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Wagner, S., Hüffer, T., Klöckner, P., Wehrhahn, M., Hofmann, T., and Reemtsma, T., Tire wear particles in the aquatic environment—A review on generation, analysis, occurrence, fate and effects, Water Res., 2018, vol. 139, pp. 83–100. https://doi.org/10.1016/j.watres.2018.03.05110.1016/j.watres.2018.03.051 ↗
2. Bartenev, G.M. and Lavrent’ev, V.V., Trenie i iznos polimerov (Friction and Wear of Polymers), Leningrad: Khimiya, 1972.
3. Brodskii, G.I., Evsratov, V.F., Sakhnovskii, N.L., and Slyudikov, L.D., Istiranie rezin (Abrasive Wear of Rubbers), Moscow: Khimiya, 1975.
4. Jung, J. and Sodano, H.A., Aramid nanofiber reinforced rubber compounds for the application of tire tread with high abrasion resistance and fuel saving efficiency, ACS Appl. Polym. Mater., 2020, vol. 2, no. 11, pp. 4874–4884. https://doi.org/10.1021/acsapm.0c0079710.1021/acsapm.0c00797 ↗
5. Jung, J. and Sodano, H.A., Synergetic effect of aramid nanofiber-graphene oxide hybrid filler on the properties of rubber compounds for tire tread application, J. Appl. Polym. Sci., 2022, vol. 139, no. 13, p. 51856. https://doi.org/10.1002/app.5185610.1002/app.51856 ↗
6. Zhang, X., Chen, Ya., Yin, Q., Wu, J., Song, W., Mohamed, A., Jia, H., Yang, F., and Rui, X., Highly improved compatibility and mechanical properties of carboxylated nitrile rubber/styrene butadiene rubber by incorporating modified Kevlar nanofibers, Mater. Chem. Phys., 2019, vol. 238, p. 121926. https://doi.org/10.1016/j.matchemphys.2019.12192610.1016/j.matchemphys.2019.121926 ↗
7. Sirisinha, Ch., Sae-oui, P., Suchiva, K., and Thaptong, P., Properties of tire tread compounds based on functionalized styrene butadiene rubber and functionalized natural rubber, J. Appl. Polym. Sci., 2019, vol. 137, no. 20, p. 48696. https://doi.org/10.1002/app.4869610.1002/app.48696 ↗
8. Molnar, W., Varga, M., Braun, P., Adam, K., and Badisch, E., Correlation of rubber based conveyor belt properties and abrasive wear rates under 2- and 3-body conditions, Wear, 2014, vol. 320, pp. 1–6. https://doi.org/10.1016/j.wear.2014.08.00710.1016/j.wear.2014.08.007 ↗
9. Zhong, J., Luo, Zh., Hao, Zh., Guo, Yu., Zhou, Z., Li, P., and Xue, B., Enhancing fatigue properties of styrene butadiene rubber composites by improving interface adhesion between coated aramid fibers and matrix, Compos. Part B: Eng., 2019, vol. 172, pp. 485–495. https://doi.org/10.1016/j.compositesb.2019.05.09110.1016/j.compositesb.2019.05.091 ↗
10. Xu, D., Karger-Kocsis, J., and Schlarb, A.K., Friction and wear of HNBR with different fillers under dry rolling and sliding conditions, Express Polym. Lett., 2009, vol. 3, no. 2, pp. 126–136. https://doi.org/10.3144/expresspolymlett.2009.1610.3144/expresspolymlett.2009.16 ↗
11. Aderikha, V.N., Koval’, V.N., and Marusenko, N.A., Reinforcement of rubber based on natural rubber and carbon black with polyoxadiazole fiber and low molecular weight rubbers, Polim. Mater. Tekhnol., 2023, no. 9, pp. 50–59. https://doi.org/10.32864/polymmattech-2023-9-4-44-5310.32864/polymmattech-2023-9-4-44-53 ↗
12. Saramolee, P., Sahakaro, K., Lopattananon, N., Dierkes, W.K., and Noordermeer, J.W.M., Comparative properties of silica- and carbon black-reinforced natural rubber in the presence of epoxidized low molecular weight polymer, Rubber Chem. Technol., 2014, vol. 87, no. 2, pp. 320–339. https://doi.org/10.5254/rct.13.8697010.5254/rct.13.86970 ↗
13. Liang, H., Fukahori, Y., Thomas, A.G., and Busfield, J.J.C., The steady state abrasion of rubber: Why are the weakest rubber compounds so good in abrasion?, Wear, 2010, vol. 268, nos. 5–6, pp. 756–762. https://doi.org/10.1016/j.wear.2009.11.01510.1016/j.wear.2009.11.015 ↗
14. Aderikha, V.N., Koval, V.N., and Marusenko, N.A., Effect of low molecular weight rubber on mechanical properties of rubber based on natural rubber and polyoxadiazole fiber, Polim. Mater. Tekhnol., 2023, vol. 9, no. 3, pp. 29–38. https://doi.org/10.32864/polymmattech-2023-9-3-29-3810.32864/polymmattech-2023-9-3-29-38 ↗
15. Tiwari, S. and Bijwe, J., Influence of fiber–matrix interface on abrasive wear performance of polymer composites, J. Reinf. Plast. Compos., 2013, vol. 33, no. 2, pp. 115–126. https://doi.org/10.1177/073168441350578610.1177/0731684413505786 ↗