Modification of Tribotechnical Properties of Carbon Composites by the Laser Surface Treatment Method
Source abstract
Abstract
Abstract The study of the structure and tribotechnical characteristics of composite material based on polyacrylonitrile (PAN) carbon fabric and a matrix obtained by the vapor deposition method has been carried out. One of the samples of the investigated material was subjected to laser treatment, with local laser heating of the surface layer to 2800–3000°C. The other composite sample was heat treated at a temperature T > 2000°C. Tribotechnical tests were carried out and values of friction and wear coefficients were obtained in the pair with steel and ceramic counterbodies. In order to determine the peculiarities of friction and wear mechanisms of modified materials, the surface of composites after friction was investigated by scanning electron microscopy with X-ray spectral analysis. It was found that laser treatment significantly improves antifriction properties of carbon composite paired with a steel counterbody (friction coefficient reduction by two times, wear reduction by three times). It is revealed that such treatment significantly changes the nature of the third body film (TB) formed on the friction surface of composites paired with steel. No elements of the counterbody material are detected in the composition of the film, which indicates its minimal wear during the friction process. The TB film itself becomes thicker and denser, completely covering the surface of the composite. This allows it to exhibit solid lubricant and anti-wear properties to a greater extent, improving the tribological characteristics of the composite.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Sarower, K., Chowdhury, A.S., Sazzad, H.A., Imtiaz, A.C., and Faiz, A., Review of the developments in composite materials over the last 15 years, Reference Module in Materials Science and Materials Engineering, Elsevier, 2023.
2. Cheng, H., Xue, N.J., and Hou, W.Q., The application and development of carbon/carbon composites in aircraft and high-speed train braking systems, Carbon, 2020, vol. 184, pp. 30–33.
3. Wu, S., Liu, Yu., Ge, Yi., Ran, L., Peng, K., and Yi, M., Structural transformation of carbon/carbon composites for aircraft brake pairs in the braking process, Tribol. Int., 2016, vol. 102, pp. 497–506. https://doi.org/10.1016/j.triboint.2016.06.01810.1016/j.triboint.2016.06.018 ↗
4. Hao, M., Luo, R., Hou, Z., Yang, W., Xiang, Q., and Yang, C., Effect of fiber-types on the braking performances of carbon/carbon composites, Wear, 2014, vol. 319, nos. 1–2, pp. 145–149. https://doi.org/10.1016/j.wear.2014.07.02310.1016/j.wear.2014.07.023 ↗
5. Lu, F., Lu, L., Liu, J., Pang, X., and Song, C., Tribological properties and wear mechanism of C/C composite applied in finger seal, Machines, 2023, vol. 11, no. 2, p. 176. https://doi.org/10.3390/machines1102017610.3390/machines11020176 ↗
6. Su, H., Zhang, C., and Sun, S., Research on the wear model of carbon/carbon composite finger seal, Wear, 2021, vol. 476, p. 203682. https://doi.org/10.1016/j.wear.2021.20368210.1016/j.wear.2021.203682 ↗
7. Temis, Yu.M. and Selivanov, A.V., Advanced seals for gas-turbine engines, Aviats. Dvigateli, 2021, no. 2, pp. 43–60. https://doi.org/10.54349/26586061_2021_2_4310.54349/26586061_2021_2_43 ↗
8. Bukovskiy, P.O., Morozov, A.V., Kulakov, V.V., Golubkov, A.K., Rodionov, N.B., and Kirichenko, A.N., High-temperature tribotechnical properties of carbon–carbon friction composites, J. Frict. Wear, 2022, vol. 43, no. 5, pp. 322–329. https://doi.org/10.3103/s106836662205002610.3103/s1068366622050026 ↗
9. Grigoryanc, A.G. and Safonov, A.N., Osnovy lazernogo termouprochneniya splavov (Basics of Laser Heat Hardening of Alloys), Moscow: Vysshaya Shkola, 1988.
10. Alsulaiman, F. and Yilbas, B., Laser treatment of a carbon/carbon reinforced composite, Lasers Eng., 2005, vol. 15, nos. 1–2, pp. 119–127.
11. Volfkovich, Y.M., Sakars, A.V., and Volinsky, A.A., Application of the standard porosimetry method for nanomaterials, Int. J. Nanotechnol., 2005, vol. 2, no. 3, pp. 292–302. https://doi.org/10.1504/ijnt.2005.00806610.1504/ijnt.2005.008066 ↗
12. Androsenko, V.N. and Yakimov, M.Yu., Parameters of laser surface heat treatment of carbon-carbon composite material, Mekhanika i modelirovanie materialov i tekhnologii. Sbornik trudov Sektsii Mezhdunarodnoi molodezhnoi nauchnoi konferentsii XLVII Gagarinskie chteniya (Mechanics and Modeling of Materials and Technologies: Proc. Section of the Int. Youth Sci. Conf. XLVII Gagarin Readings), Moscow, 2021, Moscow: Inst. Problem Mekhaniki im. A.Yu. Ishlinskogo Ross. Akad. Nauk, 2021, pp. 11–14.
13. Shpenev, A.G., The influence of the thermoelastic instability on the wear of composite brake discs, J. Frict. Wear, 2021, vol. 42, no. 1, pp. 30–37. https://doi.org/10.3103/s106836662101010410.3103/s1068366621010104 ↗
14. Shcherbakova, O.O., Bukovskij, P.O., Murav’eva, T.I., Shpenev, A.G., Krivosheev, A.Yu., Kaledin, A.V., Shikunov, S.L., and Kurlov, V.N., Study of influence a counterbody material on the tribological characteristics of c/c composites based on fabric prepregs, J. Surf. Invest.: X‑Ray, Synchrotron Neutron Tech., 2024 (in press).10.1134/S1027451024700113 ↗