Paired Modeling of the Tribological Process of the Abrasive Wear of Soil-Cutting Parts
Source abstract
Abstract
Abstract The work of tillage machinery is accompanied by a natural process of abrasive wear of soil-cutting parts, which leads to a decrease in the quality of technological operations and requires consideration in the development of new designs of such parts. The application of the method of paired modeling of the tribological process of abrasive wear makes it possible to obtain the necessary data for choosing the forms of hardening of the friction surfaces of soil-cutting parts, providing them with the required working life. The pair model proposed here is based on a combination of the results of simulation modeling on bench equipment and the values of the measured pressures in real soils in the zones of subsequent operation. Simulation modeling was carried out on a soil background corresponding to medium loamy soils, and during loading, the values of normal pressures were measured at different points of the friction surfaces and geometric shapes of normal pressure plots were built on the entire friction surface of the part. The measurement of the pressures of real soils was carried out by dynamometry of soil-cutting parts on soils intended for operation with the determination of power equivalents of total loading cutting parts on soils intended for operation with determination of power equivalents of total loading. In the paired model, a combination of simulation data and force equivalents of loading obtained under dynamometry conditions is performed, which allows us to have reliable values for the exact selection of materials and geometric shapes of soil-cutting parts focused on the guaranteed service life.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Systems and Engineering · Soil Mechanics and Vehicle Dynamics · Engineering Technology and Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Severnev, M.M., Podlekarev, N.N., Sokhadze, V.Sh., and Kitikov, V.O., Iznos i korroziya sel’skokhozyaystvennykh mashin (Wear and Corrosion of Agricultural Machinery), Severnev, M.M., Minsk: Belarus. Navuka, 2011.
2. Panov, I.M. and Vetokhin, V.I., Fizicheskie osnovy mekhaniki pochv (Physical Foundations of Soil Mechanics), Kyiv: Feniks, 2008.
3. Myalenko, V.I., Abrasive wear map of the friction surface of a soil-cutting part, J. Frict. Wear, 2020, vol. 41, no. 1, pp. 120–124.10.3103/S1068366620010146 ↗
4. Osipov, V.I., Physico-chemical theory of effective stresses in soils, GeoEkologiya, 2013, no. 1, pp. 3–25.
5. Myalenko, V.I., RF Patent No. 2 704 290/42, Bull. Izobret., 2019, no. 10.
6. Khrushchev, M.M. and Berkovich, E.S., Opredelenie iznosa detalei mashin metodom iskusstvennykh baz (Determination of Machine Parts’ Wear by the Artificial Base Method), Moscow: Akad. Nauk, 1959.
7. Goryacheva, I.G., Mekhanika funktsional’nogo vozdeistviya (Mechanics of Functional Impact), Moscow: Nauka, 2001.
8. Natsis, A., Petropoulos, G., and Pandazaros, C., Influence of local soil conditions of mouldboard ploughshare abrasive wear, Tribol. Int., 2008, vol. 41, no. 3, pp. 151–157.10.1016/j.triboint.2007.06.002 ↗
9. Bialobrzeska, B., Kostencki, P., and Stawicki, T., Wear resistance of selected cultivator coulters reinforced with sintered-carbide plates, Arch. Civil Mech. Eng., 2018, vol. 18, pp. 1661–1678.10.1016/j.acme.2018.07.005 ↗
10. Bedolla, P., Vorlaur, G., Rechberger, C., Bianchi, D., Eder, S.J., Polak, R., and Pauschitz, A., Combined experimental and numerical simulation of abrasive wear and its application to a tillage machine component, Tribol. Int., 2018, vol. 127, pp. 122–128. https://doi.org/10.1016/j.triboint.2018.03.01910.1016/j.triboint.2018.03.019 ↗
11. Napiorkowski, J., Lemecha, M., and Konat, L., Forecasting the wear of operating parts in an abrasive soil mass using the Holm-Archard model, Materials, 2019, no. 12 (13), p. 2180.10.3390/ma12132180 ↗