Wear of diamond dressing tools at vibromechanical type of dressing abrasive discs
Source abstract
Abstract
The wear and strength characteristics of the mounted diamond have been studied during the application of a new type of dressing for abrasive wheels. The diamond dresser is mounted on an elastic base in order to perform oscillations during dressing under the action of abrasive grain impacts. The experiments were aimed at determining the value of the diamond grain wear of the dressing tool, the number of the treated samples up to the forced substitution of the dressing tool, and the lifetime of the dressing tool at vibromechanical and common types of dressing. The tests have shown a significant increase in the resistance of the diamond dressing tool in the case when the vibromechanical method was used, in contrast to a common dressing by a mounted diamond wheel.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Technology and Methodologies · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Schmid, S. and Kalpakjian, S., Manufacturing Processes for Engineering Materials, Upper Saddle River, NJ: Pearson Education, 2008, 5th ed.
2. Bogachev, P.Yu. and Babenko, M.G., Durability of the working surface of the grinding wheel and the diamond dresser, Vestn. Perm. Nats. Issled. Politekh. Univ., Mashinostr., Materialoved., 2015, vol. 17, no. 2, pp. 21–29.
3. Malyshev, V.I. and Murashkin, S.V., Specific correction of the grinding wheels with ultrasonic vibrations of dresser, Vektor Nauki Tol’yatt. Gos. Univ., 2009, no. 1, pp. 24–31.
4. Lyubimov, V.V., Mogil’nikov, V.A., and Chmir, M.Ya., Kombinirovannye metody almaznogo shlifovaniya: uchebnoe posobie (Combined Methods of Diamond Grinding: Manual), Tula: Tul’sk. Gos. Univ., 2007, 2nd ed.
5. Mikromechanische Produktionstechnik. Abschlusskolloquium DFG Schwerpunktprogramm 1012, Weck, M., Ed., Aachen: Shaker-Verlag. 2003.
6. Hoffmeister, H.-W. and Hlavac, M., Dressing of microgrinding wheels, Proc. Int. Conf., Glasgow, Scotland, May 31st–June 2nd 2004, Glasgow, 2004, pp. 135–136.
7. Hesselbach, J., Hoffmeister, H. W., and Hlavac, M., Micro-grinding—efficient technique for micro-structuring hardened steels, Prod. Eng., 2005, vol. 12, no. 1, pp. 1–4.
8. Gushchin, A.F., Influence of geometric parameters of the regular microrelief of bearing races on the size of the contact area of groove and gutter ball, in Chistovaya obrabotka detalei mashin (Finishing of Machine Parts), Saratov: Sarat. Politekh. Univ., 1985, pp. 12–14.
9. Korolev, A.V., Chistyakov, A.M., and Tyapaev, S.V., The mechanism of grinding wheel dressing, in Mater. III Vseross. nauchno-prakt. konf. Sovremennye tekhnologii v mashinostroenii–2000 (Proc. III All-Russ. Sci.-Pract. Conf. “Modern Technologies in Engineering–2000”), Penza: Penz. Gos. Univ., 2000, part2.
10. Red’ko, S.G., Korolev, A.V., and Borovikov, G.A., Ultrasonic dressing of the grinding wheels, in Progressivnye metody chistovoi obrabotki detalei mashin, obespechivayushchikh vysokoe kachestvo i nadezzhnost’ (Advanced Methods of Finishing of Machine Parts Providing the High Quality and Reliability), Saratov: Sarat. Politekh. Univ., 1972, pp. 24–28.