journal article·2023-08

Effect of Basic Processing Factors for Obtaining TiN Vacuum Ion-Plasma Coatings on Their Mechanical and Tribological Characteristics

D. S. Manturov, I. V. Kolesnikov, O. V. Kudryakov, V. I. Kolesnikov, P. G. Ivanochkin, S. A. Danilchenko

Journal of Friction and Wear· Volume 44· Issue 4
Publisher page

Abstract

Abstract TiN coatings have been deposited using cathodic arc deposition at various nitrogen pressures and deposition temperatures. The structure and elemental coating composition are analyzed using a scanning electron microscope and an energy dispersive spectrometer. The mechanical properties and adhesion strength of the coating are measured using nanoindentation and scratch testing. The degree of wear is investigated with a tribometer using the ball-on-disk test method. The analysis of the results is carried out by the methods of two-factor orthogonal experiment planning with optimization elements. The results show that the coating structure has a columnar (fibrous) morphology, the composition is close to stoichiometric. The moment of coating destruction, when determining the adhesive strength, occurs at a load of about 600 mN. On the basis of the obtained regression equations for the optimized values of hardness, plasticity index and wear degree, the values of the process parameters of deposition should be in intervals T = 350–430°С and P = 0.065–0.075 Pa.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Ghufran M., Uddin G.M., Arafat S.M., Jawad M., and Rehman A., Development and tribo-mechanical properties of functional ternary nitride coatings: Applications-based comprehensive review, Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol., 2021, vol. 235, pp. 196–232.10.1177/1350650120933412 ↗
2. Tillmann, W. and Momeni, S., Tribological development of TiCN coatings by adjusting the flowing rate of reactive gases, J. Phys. Chem. Solids, 2016, vol. 90, pp. 45–53.10.1016/j.jpcs.2015.11.009 ↗
3. Kolesnikov, V.I., Kudryakov, O.V., Varavka, V.N., Manturov, D.S., and Novikov, E.S., Effect of the adhesive properties of vacuum ion-plasma TiAlN coatings on wear resistance in friction, J. Frict. Wear, 2021, vol. 42, no. 5, pp. 317–326.10.3103/S106836662105007X ↗
4. Prabakaran, V. and Chandrasekaran, K., Characterisation and corrosion resistance of TiCrN composite coating on steel by physical vapour deposition method, J. Biol. Tribol. Corros., 2016, vol. 2, p. 25.10.1007/s40735-016-0055-y ↗
5. Dejun, K., Donghui, Z., and Haoyuan, G., Microstructures and friction-wear performances of cathodic arc ion plated TiAlN coatings on YT14 cemented carbide cutting tools, J. Mater. Res., 2017, vol. 32, pp. 1693–1700.10.1557/jmr.2017.86 ↗
6. Lackner, J., Major, L., and Kot, M., Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates, Bull. Pol. Acad. Sci.: Tech. Sci., 2011, vol. 59, pp. 343–355.
7. Djabella, H. and Arnell, R., Finite element comparative study of elastic stresses in single, double layer and multilayered coated systems, Thin Solid Films, 1993, vol. 235, pp. 156–162.10.1016/0040-6090(93)90259-R ↗
8. Hintermann, H., Adhesion, friction and wear of thin hard coatings, Wear, 1984, vol. 100, pp. 381–397.10.1016/0043-1648(84)90023-1 ↗
9. Broitman, E., Indentation hardness measurements at macro-, micro-, and nanoscale: A critical overview, Tribol. Lett., 2016, vol. 65, p. 23.10.1007/s11249-016-0805-5 ↗
10. Kunchenko, V.V., Andreev, A.A., and Kartmazov, G.N., Structure and properties of erosion-resistant vacuum-arc coatings based on titanium nitrides, Nauch. Vedom. BelGU, Ser. Fiz., 2001, no. 2, pp. 21–25.
11. Il’in, A.A., Plihunov, V.V., Petrov, L.M., and Spektor, V.S., Vakuumnaya ionno-plazmennaya obrabotka (Vacuum Ion Plasma Treatment), Moscow: INFRA-M, 2014.
12. Shulayev, V.M., Andreev, A.A., Gorban, V.F., and Stolbovoi, V.A., Comparison of characteristics of vacuum-arc nano-structure TiN coatings deposited under HV pulse substrate bias, Fiz. Inzhen. Poverkhn., 2007, no. 5, pp. 94–97.
13. Kohanovskii, V.A. and Sergeeva, M.H., Planirovanie eksperimental’nykh issledovanii (Planning Experimental Studies), Rostov-on-Don: DGTU, 2014.
14. Anders, A., A structure zone diagram including plasma-based deposition and ion etching, Thin Solid Films, 2010, vol. 518, pp. 4087–4090.10.1016/j.tsf.2009.10.145 ↗
15. Kolesnikov, Yu.V. and Morozov, E.M., Mekhanika kontaktnogo razrusheniya (Mechanics of Contact Fracture), Moscow: LKI, 2007.