journal article·2021-10

Theoretical and Experimental Study of Fatigue Failure of Contact in Carbon–Carbon Composites

P. O. Bukovskiy, I. G. Goryacheva

Journal of Friction and Wear· Volume 42· Issue 5
Publisher page

Abstract

Tribological tests of carbon–carbon composites (C/C composites) were carried out for cyclic loading using the “steel ball–carbon disc” contact scheme with variation of contact loads P in the range of 50–100 N at constant sliding velocity V = 1 m/s and ambient temperature T = 23°C. Three types of carbon composites (two are reinforced by graphitized carbon fibers of different lengths of 40 and 5 mm, respectively and one is reinforced by carbonized carbon fibers with lengths of 40 mm) were considered. The depth of fatigue fracture of the surface layers of composites was studied by a non-contact method using a SensoFar S Neox optical profilometer with a 20× objective in the confocal mode of measurement collection. Modeling of cyclic loading and the fatigue damage accumulation process within the composites under considerations at the macrolevel was carried out, and the depths of fatigue crack initiation were calculated under loading/velocity conditions used in the test. Comparison of the theoretical and experimental results made it possible to analyze the influence of the loading conditions and the composite structure on the destruction of the composite subsurface layer by the fatigue mechanism in friction interaction, and also to determine the parameters of the damage accumulation function at the macrolevel. Determination of the degree index in the fatigue damage accumulation criterion opens the possibility to predict the beginning of failure of the considered composite material under friction tests with cyclic character of interaction for production loads applied to the indenter.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Gunyaev, G.M. and Gofin, M.Ya., Carbon-carbon composite materials, Aviats. Mater. Tekhnol., 2013, special issue, pp. 62–90.
2. Kramarenko, E.I., Kulakov, V.V., Kenigfest, A.M., Lisovskii, S.A., and Mozalev, V.V., Aviation breakes with carbon friction disks, Trenie Iznos, 2006, vol. 27, no. 3, pp. 290–298.
3. Wu, S., Yi, M., Ge, Y., Ran, L., and Peng, K., Effect of carbon fiber reinforcement on the tribological performance and behavior of aircraft carbon brake discs, Carbon, 2017, vol. 117, pp. 279–292.10.1016/j.carbon.2017.03.003 ↗
4. Krenkel, W. and Thébault, J.G., Ceramic matrix composites for friction applications, in Ceramic Matrix Composites: Materials, Modeling and Technology, Chichester: Wiley, 2014, ch. 23, pp. 647–671.
5. Tsai, S.W., Strength Characteristics of Composite Materials, Washington, DC: Natl. Aeronaut. Space Admin., 1965, no. CR-224.
6. Grimmer, C.S. and Dharan, C.K.H., High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites, J. Mater. Sci., 2008, vol. 43, pp. 4487–4492.10.1007/s10853-008-2651-9 ↗
7. Paimushin, V.N., Kholmogorov, S.A., and Kayumov, R.A., The mechanisms of residual deformations of fibrous composites with a layered structure under cyclic loading, Uch. Zap. Kazan. Univ., Ser. Fiz.-Mat. Nauki, 2017, vol. 159, pp. 473–492.
8. Zhao, S., Hilmas, G.E., and Dharani, L.R., Numerical simulation of wear in a C/C composite multidisk clutch, Carbon, 2009, vol. 49, pp. 2219–2225.10.1016/j.carbon.2009.04.012 ↗
9. Chichinadze, A.V., Albagachiev, A.Yu., Kozhemyakina, V.D., Kokonin, S.S., Suvorov, A.V., and Kulakov, V.V., Assessment of friction and wear characteristics of domestic friction composite materials in loaded aircraft brakes, J. Frict. Wear, 2009, vol. 30, no. 4, pp. 261–270.10.3103/S1068366609040060 ↗
10. Chichinadze, A.V., Kozhemyakina, V.D., and Suvorov, A.V., Method of temperature-field calculation in model ring specimens during bilateral friction in multidisk aircraft brakes with the IM-58-T2 new multipurpose friction machine, J. Frict. Wear, 2010, vol. 31, no. 1, pp. 23–32.10.3103/S1068366610010034 ↗
11. Wu, S., Liu, Y., Ge, Y., Ran, L., Peng, K., and Yi, M., Surface structures of PAN-based carbon fibers and their influences on the interface formation and mechanical properties of carbon-carbon composites, Composites, Part A, 2016, vol. 90, pp. 480–488.10.1016/j.compositesa.2016.08.023 ↗
12. Fujii, T. and Zako, M., Fracture and Mechanics of Composite Materials Tokyo: Jikkyo Shuppan, 1978.
13. Useinov, A.S., Kravchuk, K.S., and Konigfest, A.M., Mechanical properties of carbon composite materials, Nanoindustriya, 2011, no. 6, 24–26.
14. Johnson, K.L., Contact Mechanics, Cambridge: Cambridge Univ. Press, 1985.10.1017/CBO9781139171731 ↗
15. Goryacheva, I.G., Mekhanika friktsionnogo vzaimodeistviya (Mechanics of Friction Interaction), Moscow: Nauka, 2001.