journal article·2021-05

Validity of the Bearing Life Models at Rolling Contact Fatigue

I. M. Klebanov, V. V. Murashkin, A. I. Danilchenko

Journal of Friction and Wear· Volume 42· Issue 3
Publisher page

Abstract

Two rolling bearing life models based on the concept of dynamic stress capacity are considered. They are the modified Lundberg–Palmgren model and the Gupta–Zaretsky model. Consistency of these models with patterns of dependences of the bearing life from temperature and scale factor is analyzed. Stability of the model parameters to the conditions of the experiments used to determine them is analyzed as well. A significant dependence of the material’s contact durability on its elastic properties is a negative characteristic of the Gupta–Zaretsky model, since in studies of the temperature dependence of fatigue properties, changes in elastic properties are not explicitly taken into account. The scale factor adopted in the modified Lundberg–Palmgren model is in good agreement with the experimental data for ball bearings with balls up to 25.4 mm, and in the Gupta–Zaretsky model, for bearings with balls larger than 25.4 mm. The results of the stability analysis of the experimental parameters of the considered models to the shear stress life exponent in the life equation without a scale factor, considered in the example of a 32 220 bearing, indicate the preference of the modified Lundberg–Palmgren model. The modified Lundberg–Palmgren model has good validity characteristics. It requires further improvements aimed at taking into account the residual and operating stresses, as well as adequately taking into account the scale factor in calculating ball bearings with a ball diameter over 25.4 mm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Gear and Bearing Dynamics Analysis · Mechanical Engineering and Vibrations Research · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Palmgren, A., Ball and Roller Bearing Engineering, Philadelphia, PA: SKF Ind., 1959.
2. GOST (State Standard) 18 855–2013 (ISO 281:2007): Rolling Bearings. Dynamic Load Rating and Rating Life, Moscow: Standartinform, 2015.
3. ANSI/ABMA 11:2014: Load Ratings and Fatigue Life for Roller Bearings, Washington, DC: Am. Natl. Stand. Inst., 2014.
4. Gupta, P.K. and Zaretsky, E.V., New stress-based fatigue life models for ball and roller bearings, Tribol. Trans., 2018, vol. 61, no. 2, pp. 304–324.10.1080/10402004.2017.1319524 ↗
5. Gupta, P.K., Failure stress modification in fatigue life models for rolling bearings, Proc. Inst. Mech. Eng., Part J, 2019, vol. 233, no. 9, pp. 1327–1344.
6. Harris, T.A. and Kotzalas, M.N., Essential Concepts of Bearing Technology (Rolling Bearing Analysis), Boca Raton, FL: CRC Press, 2007.
7. Goryacheva, I.G. and Torskaya, E.V., Modeling the accumulation of contact fatigue damage in materials with residual stresses under rolling friction, J. Frict. Wear, 2019, vol. 40, no. 1, pp. 33–38.10.3103/S1068366619010057 ↗
8. Poplawski, J.V., Peters, S.M., and Zaretsky, E.V., Effect of roller profile on cylindrical roller bearing life prediction—Part I: Comparison of bearing life theories, Tribol. Trans., 2001, vol. 44, no. 3, pp. 339–350.10.1080/10402000108982466 ↗
9. GOST (State Standard) 25.504–82: Strength Calculation and Testing. Methods of Fatigue Strength Behavior Calculation, Moscow: Izd. Standartov, 1983.
10. Zaretsky, E.V., Lewicki, D.G., Savage, M., and Vlcek, B.L., Determination of turboprop reduction gearbox system fatigue life and reliability, Tribol. Trans., 2008, vol. 64, no. 1, pp. 40–50.