Contact Wear of X165GrMoV12 and X160GrMoV12-1 Moderate Heat Resistant Die Steels with a Surface Modified Layer
Source abstract
Abstract
This article presents experimental results on the contact wear of surface layers of X165GrMoV12 and X160GrMoV12-1 steels under pulsating loads. The differences in the wear resistance of surface layers are demonstrated in relation to the synthesis modes of their structure and properties. The features of the structural evolution of modified layers hardened by nitrocarburization are revealed. The modes of thermochemical treatment aimed at achievement of maximum resistance against pulsating contact stresses are determined.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Lavender, C.A., Hong, S.-T., Smith, M.T., Johnson, R.T., and Lahrman, D., The effect of laser shock peening on the life and failure mode of a cold pilger die, J. Mater. Process. Technol., 2008, vol. 204, nos. 1–3, pp. 486–491.10.1016/j.jmatprotec.2008.02.002 ↗
2. Beheshti, A. and Khonsari, M.M., On the prediction of fatigue crack initiation in rolling/sliding contacts with provision for loading sequence effect, Tribol. Int., 2011, vol. 44, pp. 1620–1628.10.1016/j.triboint.2011.05.017 ↗
3. Kang, J.H., Mechanisms of microstructural damage during rolling contact fatigue of bearing steels, PhD Thesis, Cambridge: Univ. of Cambridge, 2014. https://www.repository.cam.ac.uk/handle/1810/245255. Accessed July 31, 2017.
4. Rudenko, S.P. and Val’ko, A.L., Contact fatigue resistance of carburized gears from chromium-nickel steels, Met. Sci. Heat Treat., 2017, vol. 59, nos. 1–2, pp. 60–64.10.1007/s11041-017-0103-3 ↗
5. Ryzhov, N.M., Technological provision of contact fatigue resistance for cemented gear wheels made of heat-resistant steels, Met. Sci. Heat Treat., 2010, vol. 52, nos. 7–8, pp. 330–335.10.1007/s11041-010-9277-7 ↗
6. Stepankin, I.N., Ken’ko, V.M., and Pankratov, I.A., BY Patent 7093, 2011.
7. R 50-54-30-87. Raschety i ispytaniya na prochnost’. Metody ispytanii na kontaktnuyu ustalost’ (R 50-54-30-87: Calculations and Tests for Durability, Methods of Testing on Contact Fatigue), Moscow, 1987.
8. Poznyak, L.A., Skrynchenko, Yu.M., and Tishaev, S.I., Shtampovye stali (Die Steels), Moscow: Metallurgiya, 1980.
9. Okolovich, G.A., Evtushenko, A.T., Okhrimenko, S.A., and Semenchina, A.S., RF Patent 2 200 201, 2003.
10. Stepankin, I.N., Consideration of contact wear regularities of the surface layers of stamping tools in order to increase resistance, J. Frict. Wear, 2017, vol. 38, no. 3, pp. 178–183.10.3103/S1068366617030138 ↗
11. Januszewicz, B., Wołowiec, E., and Kula, P., The role of carbides in formation of surface layer on steel X153CrMoV12 due to low-pressure nitriding (vacuum nitriding), Met. Sci. Heat Treat., 2015, vol. 57, nos. 1–2, pp. 32–35.10.1007/s11041-015-9830-5 ↗
12. Stepankin, I.N., The effect of surface modification on the operation properties of R6M5 steel, Uprochnyayushchie Tekhnol. Pokrytiya, 2015, no. 9, pp. 20–28.