High-Speed Contact Study between a Ti-6-Al-4V Tool and an Abradable Coating Using Ballistic Benches and a Dynamic Compensation Approach
Source abstract
Abstract
To reproduce severe and short-lived contacts like those occurring between the blade tip of an aircraft engine and the abradable material coated inside the engine casing, ballistic benches can be used. These devices allow to achieve a large range of velocities and thus, they allow the study of the abrasion process and the resulting wear of these kind of sealing materials. The Al-based abradable characterized within this work have been grown by atmospheric plasma spraying on a titanium substrate that was afterwards mounted on top of an aluminum projectile. Due to the short-lived forces occurring during these kind of contacts, the dynamic behavior of the device itself strongly affects the measured force signals. In order to overcome these dynamic distortions, we present a compensation approach able to perform a virtual extension of the available dynamometer bandwidth. This approach is based on an inverse-filtering of the response signal by using a 3 × 3 force-to-force transmissibility matrix function. The validated compensation approach was used to characterize the relation between the full three-dimensional measured contact-force and the specimen wear occurring during the abradable/Ti-6-Al-4V high-speed interaction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Metal and Thin Film Mechanics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Fois, N., Watson, M., Stringer, J., and Marshall, M., An investigation of the relationship between wear and contact force for abradable materials, Proc. Inst. Mech. Eng., Part J, 2015, vol. 229, no. 2, pp. 136–150.10.1177/1350650114545139 ↗
2. Stringer, J. and Marshall, M.B., High speed wear testing of an abradable coating, Wear, 2012, vols. 294–295, pp. 257–263.10.1016/j.wear.2012.07.009 ↗
3. Dorfman, M., Erning, U., and Mallon, J., Gas turbines use abradable coatings for clearance-control seals, Sealing Technol., 2002, vol. 2002, no. 1, pp. 7–8.10.1016/S1350-4789(02)80002-2 ↗
4. Cuny, M., Philippon, S., Chevrier, P., and Garcin, F., Experimental measurement of dynamic forces generated during short-duration contacts: application to blade-casing interactions in aircraft engines, Exp. Mech., 2014, vol. 54, no. 2, pp. 101–114.10.1007/s11340-013-9780-z ↗
5. Sutter, G., Philippon, S., and Garcin, F., Dynamic analysis of the interaction between an abradable material and a titanium alloy, Wear, 2006, vol. 261, nos. 5–6, pp. 686–692.10.1016/j.wear.2006.01.030 ↗
6. Mandard, R., Witz, J.-F., Boidin, X., Fabis, J., Desplanques, Y., and Meriaux, J., Interacting force estimation during blade/seal rubs, Tribol. Int., 2015, vol. 82, part B, pp. 504–513.10.1016/j.triboint.2014.01.026 ↗
7. Ma, H., Yin, F., Guo, Y., Tai, X., and Wen, B., A review on dynamic characteristics of blade–casing rubbing, Nonlinear Dyn., 2016, vol. 84, no. 2, pp. 437–472.10.1007/s11071-015-2535-x ↗
8. Millecamps, A., Batailly, A., Legrand, M., and Garcin, F., Snecma’s viewpoint on the numerical and experimental simulation of blade-tip/casing unilateral contacts, Proc. ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, Montreal, 2015.
9. Vincent, J., Philippon, S., Cappella, A., Meriaux, J., and Selezneff, S., Enhancement of an experimental method to measure accurately the evolution of forces during short-lived interactions: application to bladeabradable material contacts in turbomachines, Measurement, 2017, vol. 98, pp. 167–178.10.1016/j.measurement.2016.11.034 ↗
10. Ewins, D.J., Modal Testing: Theory, Practice and Application, New York: Wiley, 2008, 2nd ed.
11. Kim, H.S. and Schmitz, T.L., Bivariate uncertainty analysis for impact testing, Meas. Sci. Technol., 2007, vol. 18, no. 11, pp. 3565–3571.10.1088/0957-0233/18/11/041 ↗