Effect of the Degree of Aluminum Doping on the Mechanical and Tribological Characteristics of Titanium–Aluminum Nitride Films
Source abstract
Abstract
The mechanical and tribological characteristics of titanium–aluminum nitride films deposited by the reactive magnetron sputtering of Ti–Al mosaic targets with different aluminum concentrations were studied. The dependences of the elemental composition, microhardness, and friction coefficient on the degree of doping of the films with aluminum and nitrogen concentration in the Ar/N2 gas mixture during film deposition were obtained. It was found that an increase in the aluminum content in the film results in an increase in film hardness and decrease in the friction coefficient. The optimum nitrogen concentration in the film was achieved at maximum hardness and low values of the friction coefficient. A maximum hardness of 23.5 GPa and a minimum friction coefficient of 0.082 were obtained for films of the composition Ti5AlN1.33, which had a Ti/Al ratio of 5 : 1 and a nitrogen deficiency.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Inspektor, A. and Salvador, P.A., Architecture of PVD coatings for metalcutting applications: a review, Surf. Coat. Technol., 2014, vol. 257, pp. 138–153.10.1016/j.surfcoat.2014.08.068 ↗
2. Chim, Y.C., Ding, X.Z., Zeng, X.T., and Zhang, S., Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc, Thin Solid Films, 2009, vol. 517, pp. 4845–4849.10.1016/j.tsf.2009.03.038 ↗
3. Musil, J. and Vlček, J., Magnetron sputtering of alloy and alloy-based films, Thin Solid Films, 1999, vols. 343–344, pp. 47–50.10.1016/S0040-6090(98)01567-3 ↗
4. Kawate, M., Hashimoto, A.K., and Suzuki, T., Oxidation resistance of Cr1 – xAlxN and Ti1 – xAlxN films, Surf. Coat. Technol., 2003, vol. 165, no. 2, pp. 163–167.10.1016/S0257-8972(02)00473-5 ↗
5. PalDey, S. and Deevi, S.C., Single layer and multilayer wear resistant coatings of (Ti,Al)N: a review, Mater. Sci. Eng., A, 2003, vol. 342, pp. 58–79.10.1016/S0921-5093(02)00259-9 ↗
6. Zhirkov, I., Petruhins, A., and Rosen, J., Effect of cathode composition and nitrogen pressure on macroparticle generation and type of arc discharge in a DC arc source with Ti–Al compound cathodes, Surf. Coat. Technol., 2015, vol. 281, pp. 20–26.10.1016/j.surfcoat.2015.09.030 ↗
7. Chang, H.-W., Huang, P.-K., Davison, A., Yeh, J.-W., Tsau, C.-H., and Yang, C.-C., Nitride films deposited from an equimolar Al–Cr–Mo–Si–Ti alloy target by reactive direct current magnetron sputtering, Thin Solid Films, 2008, vol. 516, pp. 6402–6408.10.1016/j.tsf.2008.01.019 ↗
8. Kong, Y., Tian, X., Gong, C., Tian, Q., Yang, D., Wu, M., Li, M., and Golosov, D.A., Microstructure and mechanical properties of Ti–Al–Cr–N films: effect of current of additional anode, Appl. Surf. Sci., 2019, vol. 483, pp. 1058–1068.10.1016/j.apsusc.2019.04.023 ↗
9. Nakano, J., Miyazaki, H., Kimura, T., Goto, T., and Zhang, S., Thermal conductivity of yttria-stabilized zirconia thin films prepared by magnetron sputtering, J. Ceram. Soc. Jpn., 2004, vol. 112, pp. S908–S911.
10. Grigor’ev, A.Ya., Devices and research methods of contact interaction of solids, Vestsi Nats. Akad. Navuk Belarusi, Ser. Fiz.-Tekh. Navuk, 2018, vol. 63, no. 1, pp. 53–67.
11. Ermolenko, M.V., Zavadski, S.M., Golosov, D.A., Melnikov, S.N., and Zamburg, E.G., Tribological behavior of TiN films depositid by reactive magnetron sputtering under low pressure, J. Frict. Wear, 2016, vol. 37, no. 3, pp. 289–292.10.3103/S1068366616030065 ↗
12. Svadkovski, I.V., Zhu Chang, Golosov, D.A., and Zavatskiy, S.M., Mechanical and Tribological Properties of AlN Thin Films, J. Xi’an Inst. Technol., 2006, vol. 26, no. 3, pp. 237–240.