Effect of active gas mixture composition on tribological behavior of coatings obtained by reactive magnetron sputtering of chromium in acetylene–nitrogen and acetylene–air gas mixtures
Source abstract
Abstract
The tribological properties of chromium-based coatings deposited by reactive magnetron sputtering in argon–acetylene–nitrogen and argon–acetylene–air mixtures of different volume compositions have been studied. The coatings acquired in acetylene–nitrogen gas mixture have DLC structure and demonstrate high mechanical characteristics and low coefficient of friction values in dry friction. Although the coefficient of friction of these coatings has a tendency to decrease with the increasing nitrogen volume concentration in the mixture (until the values below 0.1 in dry friction in pair with silicon nitride), their performance diminishes at high contact pressures. This decrease was maximal for coatings deposited in acetylene–nitrogen gas mixture, with 80 vol % of nitrogen. The substitution of nitrogen with air is shown to considerably improve the performance, but a further increase in the air volume fraction above 85 vol % provokes a drastic decrease in the efficiency, especially at high contact pressures. The possible mechanisms of these effects and the abilities of their elimination are discussed, as well.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Semenov, A.P., Tribological properties and vacuum ion-plasma methods of application of diamond and diamond-like coatings, J. Frict. Wear, 2009, vol. 30, no. 1, pp. 62–75.10.3103/S1068366609010115 ↗
2. Khrushchov, M.M., Doped diamond-like coatings for tribology, in Sovremennye tekhnologii modifitsirovaniya poverkhnostei detalei mashin (Modern Techniques for Modification of Surfaces of the Machine Parts), Moskvitin, G.V., Ed., Moscow: Lenand, 2013, pp. 78–113.
3. Robertson, J., Diamond-like amorphous carbon, Mater. Sci. Eng., R, 2002, vol. 37, pp. 129–281.10.1016/S0927-796X(02)00005-0 ↗
4. Khrushchov, M.M., Atamanov, M.V., Marchenko, E.A., Petrzhik, M.I., Levin, I.S., Diamond-like nanocomposite a-C:H:Cr coatings: structure, mechanical, and tribological properties, Bull. Russ. Acad. Sci.: Phys., 2014, vol. 78, no. 10, pp. 1007–1014.10.3103/S1062873814100104 ↗
5. Semenov, A.P. and Khrushchov, M.M., Tribological coatings with a chromium-based composite structure obtained by reactive deposition in vacuum, J. Surf. Invest.: X-Ray, Synchrotron Neutron Tech., 2014, vol. 8, no. 5, pp. 901–911.10.1134/S1027451014050176 ↗
6. Khrushchov, M.M. and Sveshnikov, S.V., X-ray analysis of diffuse scattering of thin amorphous and nanostructured coatings deposited on the substrates, Nanoinzheneriya, 2012, no. 8, pp. 37–40.
7. Kombalov, V.S., Metody i sredstva ispytanii na trenie i iznos konstruktsionnykh i smazochnykh materialov: spravochnik (Method and Tools for Tests of Friction and Wear of Structural Materials and Lubricants: Handbook), Frolov, K.V. and Marchenko, E.A., Eds., Moscow: Mashinostroenie, 2008.
8. Marchenko, E.A., The theory of fatigue wear: brief review, Trenie Smazka Mash. Mekh., 2008, no. 7, pp. 3–7.
9. Pop, I., Andrecut, M., Burda, I., Andrecut, C., Pop, O., Ivan, I., Nazarenco, I., and Oprea, C., X-ray K-edge absorption and magnetic behavior of chromium in stoichiometric and non-stoichiometric α-Cr2O3, Mater. Chem. Phys., 1997, vol. 47, no. 1, pp. 85–89.10.1016/S0254-0584(97)80033-8 ↗
10. Fromm, E. and Gebhardt, E., Gase und Kohlenstoff in Metallen, Berlin: Springer-Verlag, 1976.10.1007/978-3-642-80943-9 ↗
11. Lisenkov, A.A., Radtsig, N.M., and Trifonov, S.A., Specific plasmochemical synthesis of carbon-based compounds in plasma of the vacuum-arc discharge, Vak. Tekh. Tekhnol., 2012, vol. 22, no. 4, pp. 253–258.
12. Levin, I.S., Khrushchov, M.M., Marchenko, E.A., and Avdyukhina, V.M., The effect of alloying on the structure and peculiarities of tribological behavior of vacuum-deposited diamond-like coatings, Moscow Univ. Phys. Bull., 2016, vol. 71, no. 2, pp. 186–192.10.3103/S0027134916020065 ↗
13. Fuentes, G.G., Rodriguez, R., Avilar-Batista, J.C., Housden, J., et al., Recent advances in the chromium nitride PVD process for forming and machining surface protection, J. Mater. Process. Technol., 2005, vol. 167, pp. 415–421.10.1016/j.jmatprotec.2005.06.011 ↗
14. Buyanovsky, I.A., Ignatieva, Z.V., Khrushchov, M.M., Levchenko, V.A., and Matveenko, V.N., Specific destruction of diamond-like coatings at friction, Trenie Smazka Mash. Mekh., 2013, no. 7, pp. 44–47.
15. Levchenko, V.A., Matveenko, V.N., Buyanovsky, I.A., and Ignatieva, Z.V., Influence of carbon coatings on lubricating properties of boundary layers, J. Eng. Tribol., 2004, vol. 218, no. 6, pp. 485–494.
16. Iwamura, E., Hybridized carbon nanocomposite thin films: synthesis, structures, and tribological properties, in Tribology of Polymeric Nanocomposites: Fiction and Wear in Bulk Materials and Coatings, Friedrich, K. and Schlarb, A.K., Eds., Amsterdam: Elsevier, 2008, pp. 283–303.10.1016/S1572-3364(08)55012-9 ↗