Friction of composites based on titanium carbide produced by the process combustion method
Source abstract
Abstract
The method of SHS force compaction is used to produce composites that include TiC + 50 vol % inert. Copper, iron, nichrome, and steel G13 served as the inert. It is noted that the lattice parameter, the TiC grain size, and the mass ratio Ti/C in TiC grains are practically independent of the inert composition. It is shown that some of the composites possess high mechanical properties. The friction of the composites that contain Ni-Cr is characterized by a friction coefficient of up to 0.5 and a high wear owing to their strong adhesion to the counterbody. The materials whose compositions are TiC + (Cu, Fe) and TiC + (Cu, G13) are effective under a pressure of about 100 MPa and can serve as a basis for developing tribological materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Surface Treatment and Coatings · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Merzhanov, A.G., Protsessy goreniya i sintez materialov (Processes of Combustion and Synthesis of Materials), Telepa, V.T. and Khachoyan, A.V., Eds., Chernogolovka: ISMAN, 1998.
2. Merzhanov, A.G. and Mukas’yan, A.S., Tverdoplamennoe gorenie (Solid Flame Combustion), Moscow: Torus-Press, 2007.
3. Pityulin, A.N., Force Compacting in Processes of Self-Propagating High-Temperature Synthesis, in Samorasprostranyayushchiisya vysokotemperaturnyi sintez: teoriya i praktika (Self-Propagating High-Temperature Synthesis: Theory and Practics), Chernogolovka: Territoriya, 2001.
4. Korchagin, M.A. and Dudina, D.V., Use of Self-Propagating High-Temperature Synthesis and Mechanical Activation for Nanocomposire Production, Fizika Goreniya Vzryva, 2007, vol.43, no. 2, pp. 58–71.
5. Talako, T.L., Sharfutdinov, M.R., Grigor’eva, T.F., et al., Poluchenie kompozitov NixAly/Al2O3 Composite Production by Combination of Mechanical Activayion and Self-Propagating High-Temperature Synthesis Methods, Fizika Goreniya Vzryva, 2009, vol. 45, no. 6, pp. 31–34.
6. Levashov, E.A., Rogachev, E.A., Yukhvid, E.A., and Borovinskaya, I.P., Fiziko-khimicheskie i tekhnologicheskie osnovy samorasprostranyayushchegosya vysokotemperaturnogo sinteza (Physico-Chemical and Technological Fundamentals of Self-Propagating High-Temperature Synthesis), Moscow: BINOM, 1999.
7. Gurevich, I.P., Narva, V.K., and Frage, V.K., Karbidostali (Carbdosteels), Moscow: Metallurgiya, 1988.
8. Fedorchenko, I.M. and Pugina, L.I., Kompozitsionnye spechennye antifriktsionnye materialy (Composite Sintered Antifriction Materials), Kiev: Naukova Dumka, 1980.
9. Storms, E., Refractory Carbides, New York: Academic, 1967; Moscow: Atomizdat, 1970.
10. Kosolapova, T.Ya., Karbidy, (Carbides), Moscow: Metallurgiya, 1968.
11. Reznikov, A.N. and Reznikov, L.A., Teplovye protsessy v tekhnologicheskikh sistemakh: Uchebnik dlya vuzov (Thermal Processes in Technological Systems: A Tutorial for Institutes of Higher Education), Moscow: Mashinostroenie, 1990.