A technique for calculating tribotechnical characteristics of tractive cylindrical gear of VL-10 locomotive
Source abstract
Abstract
A technique for the design calculations of the local strength, wear, and durability of tractive cylindrical double gear of VL-10 locomotive with angular tooth correction has been suggested. The technique allows for realistic engagement conditions (parity and wear-induced changes in the tooth profile curvature). The regularities of the effect that structural (angular engagement correction) and operational (linear tooth wear) factors have on these parameters for triple–double–triple tooth engagement in this gear have been revealed. It has been established that, when considering tooth correction, there are certain optimum displacement coefficients that maximize the durability compared to the uncorrected gear. It has been shown that, if one allows for changes in the tooth-profile due to wear are allowed for, the actual durability and bearing capacity of the gear is higher. The results have been presented graphically in order to help establish regularities of the effect of engagement conditions on the tribotechnical characteristics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Metal Alloys Wear and Properties · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Drozdov, Yu.N., Calculation of wearing and modeling of wear and friction, in Iznosostoikost’ (Wear Resistance), Moscow: Nauka, 1975, pp. 120–135.
2. Pronikov, A.S., Nadezhnost’ mashin (Reliability of Machines), Moscow: Mashinostroenie, 1978.
3. Grib, V.V., Reshenie tribotekhnicheskikh zadach chislennymi metodami (Solution of Tribotechnical Problems by Numerical Methods), Moscow: Nauka, 1982.
4. Shil’ko, S.V. and Starzhinskii, V.E., Calculation of wear resistance of gears and wheels made of reinforced composite materials, Trenie Iznos, 1993, vol. 14, no. 3, pp. 444–451.
5. Flodin, A. and Andersson, S., A simplified model for wear prediction in helical gears, Wear, 2001, vol. 249, nos. 3–4, pp. 285–292.10.1016/S0043-1648(01)00556-7 ↗
6. Kahraman, A., Bajpai, P., and Anderson, N.E., Influence of tooth profile deviations on helical gear wear, J. Mech. Des., 2005, vol. 127, no. 4, pp. 656–663.10.1115/1.1899688 ↗
7. Kolivand, M. and Kahraman, A., An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations, J. Mech. Des., 2010, vol. 132, no. 7.10.1115/1.4001722 ↗
8. Pasta, A. and Mariotti Virzi, G., Finite element method analysis of a spur gear with a corrected profile, J. Strain Anal., 2007, vol. 42, pp. 281–292.10.1243/03093247JSA284 ↗
9. Chernets, M.V., Yarema, R.Ya., and Chernets, Yu.M., Assessment of the influence of adjustment and wear of gears of involute cylindrical transmission on durability. Part 1: Durability and wear, Fiz.-Khim. Mekh. Mater., 2012, no. 3, pp. 30–39.
10. Chernets, M.V., Yarema, R.Ya., and Chernets, Yu.M., Assessment of the influence of adjustment and wear of gears of involute cylindrical transmission on durability. Part 2: Contact strength, Fiz.-Khim. Mekh. Mater., 2012, no. 6, pp. 56–59.