journal article·2024-10

The Influence of the Cooling Mode during High-Speed Thermal Spraying of Coatings Made of 95Cr18 Steel on Their Structure and Wear Resistance

V. A. Kukareko, M. A. Belotserkovsky, A. N. Grigorchik, Guo Xiaomei

Journal of Friction and Wear· Volume 45· Issue 5
Publisher page

Abstract

Abstract A study was carried out on the influence of the cooling rate of gas-thermal coatings made of high-chromium 95Cr18 steel on their phase composition and tribotechnical properties. It has been established that preheating the steel substrate to 400°C before spraying the coating leads to a 2.7-fold decrease in its cooling rate in the region of bainite transformation and an increase in the content of retained austenite in the coating to 83.5 vol %. It is shown that the stabilization of austenite is due to the redistribution of carbon between the α- and γ-phases and the enrichment of austenite with carbon. It has been established that a coating made of 95Cr18 steel, sprayed onto a substrate heated to 400°C, is characterized by higher wear resistance under various friction conditions (by 12–24%) compared to a coating formed on a cold substrate. High wear resistance of coatings with a high content of the γ-phase is achieved due to the deformation-activated γ → α transformation, leading to a significant increase in microhardness and wear resistance of the surface layers of coatings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Surface Treatment and Coatings · Coal Combustion and Slurry Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Kukareko, V.A., Grigorchik, A.N., Belotserkovskii, M.A., and Sosnovskii, V.A., Nature of formation of metastable austenitic structure during thermal spraying of high-chromium martensitic steel 95Kh18, Uprochnyayushchie Tekhnol. Pokrytiya, 2017, no. 7, pp. 318–322.
2. Kukareko, V.A., Byeli, A.V., Belotserkovskii, M.A., and Grigorchik, A.N., Effect of ion-beam nitriding on structure, phase state, and tribological behavior of efficient thermal spray coatings deposited from various classes of rod steels, J. Frict. Wear, 2013, vol. 34, no. 6, pp. 475–480. https://doi.org/10.3103/s106836661306009310.3103/s1068366613060093 ↗
3. Korobov, Yu.S., Alvan, Kh.L., Makarov, A.V., and Sirosh, V.A., Comparative resistance against cavitation erosion of austenitic steels of the solar level of metastability, Obrab. Met., 2022, vol. 25, no. 1, pp. 30–50.
4. Alwan, H.L., Korobov, Yu.S., Soboleva, N.N., Lezhnin, N.V., Makarov, A.V., Nikolaeva, E.P., and Deviatiarov, M.S., Cavitation erosion-corrosion resistance of deposited austenitic stainless steel/E308L-17 electrode, Solid State Phenom., 2020, vol. 299, pp. 908–913. https://doi.org/10.4028/www.scientific.net/ssp.299.90810.4028/www.scientific.net/ssp.299.908 ↗
5. Patyupkin, A.V., Rudychev, A.S., Greshta, V.L., and Solidor, N.A., Development of materials and restoration of parts under the combined influence of cavitation, corrosion and abrasive wear, Vestnik Priazovskogo Gosudarstvennogo Tekhnicheskogo Universiteta. Seriya: Tekhnicheskie Nauki, 2010, no. 20, pp. 125–129.
6. Malinov, V.L., Surfacing materials and treatments that provide increased durability due to metastable austenite, Vestnik Khar’kovskogo Natsional’nogo Avtomobil’no-Dorozhnogo Universiteta, 2009, no. 46, pp. 92–94.
7. Gabaidulin, D.Y. and Grechneva, M.V., Study of cavitation wear and restoration of impellers of hydraulic turbines of hydroelectric power stations, Trudy GOSNITI, 2013, vol. 111, no. 2, pp. 137–141.
8. Popov, A.A. and Popova, L.E., Izotermicheskie i termokineticheskie diagrammy raspada pereokhlazhdennogo austenita (Isothermal and Thermokinetic Diagrams of the Decomposition of Supercooled Austenite), Moscow: Gosudarstvennoe Nauchno-Tekhnicheskoe Izdatel’stvo Mashinostroitel’noi Literatury, 1961.
9. Novikov, I.I., Teoriya termicheskoi obrabotki metallov. Uchebnik dlya vuzov (Theory of heat treatment of metals: A Textbook for Universities), Moscow: Metallurgiya, 1986, 4th ed.
10. Sadovskii, V.D. and Fokina, E.A., Ostatochnyi austenit v zakalennoi stali (Retained Austenite in Hardened Steel), Moscow: Nauka, 1986.