Influence of the Fiber Bedding Direction on the Fiber Composite Wear
Source abstract
Abstract
Abstract— The fibrous composite wear rate dependence on the angle between the sliding direction and the direction of the fibers on the friction surface, when fibers in the material are parallel to the friction surface was studied. For this purpose, an experiment was carried out on the wear of a composite material sample based on carbon fiber and a carbon matrix in the form of a disc with a ring-shaped counterbody made of silicon carbide ceramics. The structure of the composite made of carbon twill weave forms on the friction surface areas with fibers oriented parallel to each other and the surface of the material. Setting up the experiment according to the “ring–disk” scheme allows one to obtain a different angle between the direction of the fibers and the direction of sliding in one test. Based on the results of the friction surface relief study after the tests, the relative wear rate of the surface areas, which are characterized by different directions of the fibers, is determined. It was found that areas with fibers directed at an acute angle to the friction direction have greater wear resistance, and fibers located at a right angle to the direction of sliding are more susceptible to destruction during wear. A wear process model of an individual fiber up to its complete destruction is constructed. A phenomenological criterion for the destruction of an individual fiber is proposed, which makes it possible to estimate the effect of the angle between the direction of the fiber and the direction of sliding on the destruction of the fiber. An algorithm for determining the coefficients included in the proposed wear model, based on a limited number of tribological tests, is proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Material Properties and Applications · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Hrushchev, M.M. and Babichev, M.A., Abrazivnoe iznashivanie (Abrasive Wear), Moscow: Nauka, 1970.
2. Zum-Gahr, K.H., Abrasive wear of two-phasemetallic materials with a coarse microstructure, in Proceedings of the International Conference on Wear of Materials, Material Park, OH: Am. Soc. Mater. Eng., 1985, p. 793.
3. Pesetskii, S.S., Bogdanovich, S.P., and Myshkin, N.K., Tribological behavior of nanocomposites produced by the dispersion of nanofillers in polymer melts, J. Frict. Wear, 2007, vol. 28, no. 5, pp. 457–475.10.3103/S1068366607050091 ↗
4. Goryacheva, I.G. and Torskaya, E.V., Contact problems in the presence of wear for bodies with a variable wear resistance coefficient over the surface, Trenie Iznos, 1992, vol. 13, no. 1, pp. 185–194.
5. Yen, B. and Dharan, C.K.H., A model for the abrasive wear of fiber-reinforced polymer composites, Wear, 1996, vol. 195, pp. 123–127.10.1016/0043-1648(95)06804-X ↗
6. Gun, Y.L., Dharan, C.K.H., and Ritchie, R.O., A physically-based abrasive wear model for composite materials, Wear, 2002, vol. 252, pp. 322–331.10.1016/S0043-1648(01)00896-1 ↗
7. Shpenev, A., Model of composite wear with abrasive particles, Adv. Mater., 2018, vol. 207, pp. 459–468.10.1007/978-3-319-78919-4_35 ↗
8. Goryacheva, I.G. and Makhovskaya, Yu.Yu., Modeling of fiber composite wear, Adv. Struct. Mater., 2021, vol. 141, pp. 163–174.10.1007/978-3-030-54928-2_13 ↗
9. Rodriguez-Tembleque, L. and Aliabadi, M.H., Friction and wear modelling in fiber-reinforced composites, Comput. Model. Eng. Sci., 2014, vol. 102, no. 3, pp. 183–210.
10. Cheng, B. and Kortschot, M., An energy-based model for the wear of unidirectional carbon fiber reinforced epoxy, J. Compos. Mater., 2020, vol. 54, no. 28, pp. 4535–4544.10.1177/0021998320935486 ↗
11. Sharma M., Mohan Rao I., and Bijwe, J., Influence of fiber orientation on abrasive wear of unidirectionally reinforced carbon fiber-polyetherimide composites, Tribol. Int., 2010, vol. 43, pp. 959–964.10.1016/j.triboint.2009.12.064 ↗
12. Shpenev, A.G., Muravyeva, T.I., Shkalei, I.V., Kulakov, V.V., and Golubkov, A.K., The study of the surface fracture during wear of C/C fiber composites by SPM and SEM, Proc. Struct. Integr., 2020, vol. 28, pp. 1702–1708.
13. Frankl, S., Pletz, M., and Schuecker, C., Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites, Proc. Struct. Integr., 2019, vol. 17, pp. 51–57.
14. Shpenev, A.G., The influence of the thermoelastic instability on the wear of composite brake discs, J. Frict. Wear, 2021, vol. 42, no. 1, pp. 30–37.10.3103/S1068366621010104 ↗
15. Graf, M. and Ostermeyer, G.-P., Efficient computation of thermoelastic instabilities in the presence of wear, Wear, 2014, vol. 312, pp. 11–20.10.1016/j.wear.2014.01.008 ↗