The Influence of Biocarbon Powder Produced from a Pine Nutshell on Tribotechnical Properties of Copper Based Friction Material Running Under Conditions of Boundary Friction
Source abstract
Abstract
Abstract— This article describes the analysis of influence of biocarbon (BC) produced by pyrolysis from a pine nutshell on tribological properties of friction material. The research object has been presented by copper-based friction material doped with 12% tin with 10–40 vol % of carbon additive in the form of BC. The average particle size of BC is 10 μm. The tribological properties has been analyzed using an IM-58 friction machine. The tribological tests demonstrate that with an increase in the BC content the dynamic friction coefficient increases from 0.041 to 0.066. With the aim of comparison, addition of GE-1 grade powdered graphite results in an increase in the friction coefficient from 0.038 to 0.069. Simultaneously with the increase in friction coefficient the wear of friction material also increases not exceeding its ultimate value. Thus, at 10 vol % of BC addition the wear is 4.0 μm/km, at 40 vol %, 12.1 μm/km. Analysis of surface morphology of bronze demonstrates that the BC particles are worn uniformly with bronze layer, retaining the initial porous structure. The products of BC destruction with sizes of 50–500 nm have been introduced into the surface layer of bronze. The results demonstrate opportunities of biocarbon additive in friction material, which can be used as a substitution of conventionally used graphite. It should be mentioned that the promising opportunities of BC addition to powdered antifriction material are determined by initial raw material for its production.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Systems and Engineering · Tribology and Wear Analysis · Advanced Theoretical and Applied Studies in Material Sciences and Geometry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Ilyushchenko, A.F., Leshok, A.V., Dyachkova, L.N., and Alekseyenko, N.A., Influence of copper frictional material composition on structure and tribotechnical properties, J. Frict. Wear, 2019, vol. 40, no. 6, pp. 495–500.10.3103/S1068366619060151 ↗
2. Fedorchenko, I.M. and Pugina, L. I., Kompozitsionnye spechennye antifriktsionnye materialy (Composite Sintered Anti-Friction Materials), Kiev, 1980.
3. Il’yushchenko, A.F., Current developments in powder metallurgy for mechanical engineering, Mekh. Mashin, Mekhanizm. Mater., 2012, vol. 20, no. 3, pp. 113–120.
4. Sharipov, V.M., Shcherenkov, G.M., and Sokolov, V.A., Review and analysis of the properties of new friction materials for automotive clutches, in Nagruzhennost’, tyagovye svoistva, nadezhnost’ i dolgovechnost' traktorov (Loading, Traction Properties, Reliability and Durability of Tractors), Moscow: Mashinostroenie, 1988, pp. 162–170.
5. Al’gin, V.B. and Poddubko, S.N., Resursnaya mekhanika transmissii mobil’nykh mashin (Resource Mechanics of Mobile Car Transmissions), Minsk: Bel. Navuka, 2019.
6. Fedorchenko, I.M., Kryachek, V.M., and Panaioti, I.I., Sovremennye friktsionnye materialy (Modern Friction Materials), Kiev, 1975.
7. Biryukov, V.P., Il’yushchenko, A.F., and Leshok, A.V., Pinchuk, T.I., Influence of carbon-containing additives in the composition of copper-based friction material on boundary friction in mineral and synthetic oils, J. Frict. Wear, 2020, vol. 41, no. 5, pp. 377–382.10.3103/S1068366620050074 ↗
8. Rogovoi, A.N. and Leshok, A.V., Evaluation of the tribological properties of a friction material based on copper containing shungite powder, as well as carbon, basalt and glass fibers, Poroshk. Metall., 2018, no. 41, p. 208.
9. Manya, J.J., Pyrolysis for biochar purposes: A review to establish current knowledge gaps and research needs, Environ. Sci. Technol., 2012, vol. 46, pp. 7939–7954. https://doi.org/10.1021/es301029g10.1021/es301029g ↗
10. Wang, L., Skreiberg, O., Wesenbeeck, S.V., Gronli, M., and Antal, J., Experimental study on charcoal production from woody biomass, Energy Fuels, 2016, vol. 30, no. 10, pp. 7994–8008. https://doi.org/10.1021/acs.energyfuels.6b0103910.1021/acs.energyfuels.6b01039 ↗
11. Kuznetsov, G.V., Zenkov, A.V., Tolokolnikov, A.A., Cherednik, I.V., and Yankovsky, S.A., Ignition of particles of finely dispersed fuel mixtures based on coal and fine wood, Energy, 2020, vol. 220, p. 119697. https://doi.org/10.1016/j.energy.2020.11969710.1016/j.energy.2020.119697 ↗
12. Dziok, T. and Penkala, K., The possibility of reducing emissions from households by using coal briquettes, Polityka Energ., 2020, vol. 23, no. 3, pp. 55–70.10.33223/epj/126438 ↗
13. Madanayake, B.N., Gan, S., and Eastwick, C., Biomass as an energy source in coal co-firing and its feasibility enhancement via pre-treatment techniques, Fuel Process. Technol., 2017, vol. 159, pp. 287–305. https://doi.org/10.1016/j.fuproc.2017.01.02910.1016/j.fuproc.2017.01.029 ↗
14. Reis, G.S.d., Oliveira, H.P.d., Larsson, S.H., Thyrel, M., and Claudio Lima, E.A., Short review on the electrochemical performance of hierarchical and nitrogen-doped activated biocarbon-based electrodes for supercapacitors, Nanomaterials, 2021, vol. 11, p. 424. https://doi.org/10.3390/nano1102042410.3390/nano11020424 ↗
15. Sohi, S., Krull, E., Lopez-Capel, E., and Bol, R., A review of biochar and its use and function in soil, Adv. Agron., 2010, vol. 105, pp. 47–82. https://doi.org/10.1016/S0065-2113(10)05002-910.1016/S0065-2113(10)05002-9 ↗
16. Zare, H., Khodabandehlo, Z., Bayat, H., and Jovzi, M., The effect of a superabsorbent and biochar on some physical and hydraulic properties of two arable sandy loam and clay loam soils, J. Soil Sci. Plant Nutrit., 2022, vol. 22, no. 2, pp. 2557–2569. https://doi.org/10.1007/s42729-022-00827-710.1007/s42729-022-00827-7 ↗
17. Ogunsona, E.O., Misra, M., and Mohanty, A.K., Sustainable biocomposites from biobased polyamide 6,10 and biocarbon from pyrolyzed miscanthus fibers, J. Appl. Polym. Sci., 2017, vol. 134, pp. 1–11. https://doi.org/10.1002/app.4422110.1002/app.44221 ↗
18. Demirbas, A., Biomass resource facilities and biomass conversion processing for fuels and chemicals, Energy Convers Manage., 2001, vol. 42, pp. 1357–1378. https://doi.org/10.1016/S0196-8904(00)00137-010.1016/S0196-8904(00)00137-0 ↗
19. Danhui Xin, D., Saha, N., Toufiq Reza, M., Hudson, J., and Chiu, P.C., Pyrolysis creates electron storage capacity of black carbon (biochar) from lignocellulosic biomass, ACS Sustainable Chem. Eng., 2021, vol. 9, no. 19, pp. 6821–6831. https://doi.org/10.1021/acssuschemeng.1c0125110.1021/acssuschemeng.1c01251 ↗
20. Leshok, A.V., Il’yushchenko, A.F., D’yachkova, L.N., and Pinchuk, T.I., Tribotechnical properties of a copper-based powder friction material with the addition of iron-chromium alloy powder, J. Frict. Wear, 2021, vol. 42, no. 1, pp. 1–6.10.3103/S1068366621010049 ↗
21. Ivanov, V.V. and Shcherbakov, I.N., Anti-frictional properties modeling of the unhomogeneous gradient compositional covers upon surface of steel details of the friction knots, Izv. Vyssh. Uchebn. Zaved., Sev.-Kavk. Reg., Tekh. Nauki, 2010, no. 5, pp. 72–75.
22. Shcherbakov, I.N., Development of a composite nickel-phosphorus coating modified with boron nitride and polytetrafluoroethylene, Cand. Sci. (Tech. Sci.) Dissertation, Novocherkassk: YURGTU (NPI), 2003.