journal article·2021-07

Effect of Retained Austenite on the Wear Resistance of C80W1 and 90CrSi5 Tool Steels

I. N. Stepankin, E. P. Pazdniakou

Journal of Friction and Wear· Volume 42· Issue 4
Publisher page

Abstract

The paper presents the results of studies on the effect of heat treatment modes on the microstructure, hardness, and wear mechanism under the action of pulsating contact stresses of C80W1 and 90CrSi5 tool steels. It was revealed that cryogenic treatment no later than half an hour after quenching reduces the volume fraction of retained austenite from 9 to 5 vol % in C80W1 steel and from 5 to 3 vol % in 90CrSi5 steel. The low content of the volume fraction of retained austenite in combination with the increased silicon content in 90CrSi5 steel reduced its wear resistance at contact stresses with an amplitude of 1300 ± 65 MPa in comparison with C80W1 steel. Cryogenic treatment of C80W1 steel reduced the period of high wear resistance from 30 000 to 12 000 loading cycles. For 90CrSi5 steel, the effect of cryogenic treatment on wear characteristics is insignificant due to a slight decrease in the amount of retained austenite (from 5 to 3 vol %). The implementation of the research results is promising at enterprises for the production of hardware products using a stamping tool for punching, drawing, and cold heading with maximum stresses on the engraving of the tool of the order of 1300 ± 65 MPa. The material of punches and dies can be C80W1 steel, hardened by quenching in water from a temperature of 780°C and tempering at 200°C and not subjected to cryogenic treatment.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Zubtsov, M.E., Povyshenie stoikosti shtampov dlya kholodnoi shtampovki (Improving the Durability of Cold Forming Dies), Leningrad: Leningr. Dom Nauchno-Tekh. Propagandy, 1960.
2. Zubtsov, M.E. and Korsakov, V.D., Stoikost’ shtampov (Durability of Dies), Leningrad: Mashinostroenie, 1971.
3. Konstruktsionnye materialy: Spravochnik (Construction Materials: Handbook), Arzamasov, B.N., Ed., Moscow: Mashinostroenie, 1990.
4. Sheinerman, V.M., Stali dlya shtampov kholodnogo deformirovaniya (Steels for Cold-Stamping Dies), Riga: Lat. Resp. Inst. Nauchno-Tekh. Inf. Propagandy, 1969.
5. Pazdniakou, E.P. and Stepankin, I.N., Features contact wear diffusion-hardened layers of economically-alloyed steels, Materialy XXVI Mezhdunarodnoi innovatsionno-orientirovannoi konferentsii molodykh uchenykh i studentov (MIKMUS–2014), Moskva, 17–19 dekabrya 2014 goda (Proc. XXVI Int. Innovation Conf. of Young Scientists and Students (IICYSS-2014), Moscow, December 17–19, 2014), Moscow: Inst. Mashinoved., Ross. Akad. Nauk, 2014, pp. 255–259.
6. Vydavlivanie rel’efnykh polostei v formoobrazuyushchikh detalyakh tekhnologicheskoi osnastki: Rukovodyashchii tekhnicheskii material (Technical Guidance for Extrusion of Relief Cavities in the Forming Parts of Technological Fitting), Gorky, 1983.
7. Rudenko, S.P., et al., Microstructure of hardened layers of high-stressed gear wheels from chromium-nickel steels, Izv. Nats. Akad. Nauk Bel., 2011, no. 1, pp. 11–17.
8. Stepankin, I.N., Ken’ko, V.M., and Pankratov, I.A., BY Patent 7093, 2011.
9. R 50-54-30-87. Raschety i ispytaniya na prochnost’. Metody ispytanii na kontaktnuyu ustalost’ (R 50-54-30-87: Calculations and Tests for Durability, Methods of Testing on Contact Fatigue), Moscow, 1987.
10. Stepankin, I.N. and Ken’ko, V.M., Stoikost’ kholodnovysadochnoi osnastki i metody ee povysheniya (Durability of Cold–Upsetting Rigging), Gomel: Gomel. Gos. Tekh. Univ. im. P.O. Sukhogo, 2014.
11. Karelin, E.N., Nikiforov, M.E., and Tigin, A.V., Regularities of wear of gear teeth, Usp. Sovrem. Estestvozn., 2012, no. 6, pp. 75–76.
12. Vdovin, K.N., Gorlenko, D.A., and Feoktistov, N.A., Influence of the stacking fault energy on the abrasion resistance of castings from Fe–12Mn–1.2C steel, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2016, vol. 59, no. 9, pp. 603–609.
13. Vishnyakov, Ya.D., Sovremennye metody issledovaniya struktury deformirovannykh kristallov (Modern Studies of the Structure of Deformed Crystals), Moscow: Metallurgiya, 1975.