Morphology of worn surfaces of iron–graphite materials sintered or infiltrated with tin bronze
Source abstract
Abstract
Specific features of the wear of an iron—graphite material with molybdenum disulfide additive produced by compaction followed by sintering or infiltration with tin bronze are studied. It has been found that in the course of friction the lubricant and hard wear particles accumulate in pores on the surface of the sintered material, which leads to the abrasive wear of the counterbody. During the friction of the infiltrated materials, selective mass transfer occurs due to the morphology of the copper phase, and the wear surfaces of these materials have a sponge—capillary structure. The wear resistance of the infiltrated materials is 2.5–3.3 times higher than that of the sintered materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Advanced machining processes and optimization · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Zozulya, V.D., Ekspluatatsionnye svoistva poroshkovykh podshipnikov (Exploitation Properties of Powder Bearings), Kiev: Naukova Dumka, 1989.
2. Semenov, A.P., Antifriction materials: Application and outlook, Trenie Smazka Mash. Mekhan., 2007, no. 12, pp. 211–236.
3. James, W.B. and West, G.T., Ferrous powder metallurgy materials, Powder Metal Technologies and Applications of ASM Handbook. ASM Int., 1998, vol. 7, pp. 1872–1947.
4. Garkunov, D.R., Tribotekhnika (iznos i bezyznosnost') (Tribotecnics (Wear and Wearlessness), Moscow: MSKhA, 2001.
5. Myshkin, N.K., Friction transfer film formation in boundary lubrication, Wear, 2000, vol. 245, pp. 116–124.10.1016/S0043-1648(00)00472-5 ↗
6. Padgurskas, J., Snitka, V., Jankauskas, V., and Andriusis, A., Selective transfer phenomenon in lubricated sliding surfaces with copper and its alloy coatings made by electro-pulse spraying, Wear, 2006, vol. 260, pp. 652–661.10.1016/j.wear.2005.03.033 ↗
7. Ilie, F., Studies and researches concerning the tribological behavior of friction couple functioning with selective transfer, Tribol. Int., 2006, vol. 39, pp. 774–780.10.1016/j.triboint.2005.07.006 ↗
8. Lubimov, D. and Dolgopolov, K., Micromechanisms controlling the structural evolution of tribosystems, in Nanocomposites with Unique Properties and Applications in Medicine and Industry, 2011.
9. Kuzharov, A.S., Bulgarevich, S.B., Burlakova, V.E., Kuzharov, A.A., and Akimova, E.E., Molecular mechanisms of self-organization at friction. Part vii. Fluctuations of the tribo-EMF and stepwise coagulation of copper nanoclusters when the servovit film appears under the effect of wearlessness, J. Frict. Wear, 2009, vol. 30, pp. 271–276.10.3103/S1068366609040072 ↗
10. Pinchuk, L.S. and Goldade, V.A., Smart materials in materials science, J. of Siber. Feder. Univ. Eng. Technol., 2013, no. 6, pp. 805–817.