journal article·2021-05

A Method to Increase the Permissible Torque of the Friction Force in Steering Units of Liquid Propellant Engines

V. B. Balyakin, A. V. Lavrin

Journal of Friction and Wear· Volume 42· Issue 3
Publisher page

Abstract

A conventional sum of the torques due to friction force and thrust asymmetry torque in a separate steering unit is considered. The total torque, which characterizes this conventional sum, is introduced for the first time in the research of the torque-related characteristics of the steering units of liquid-propellant rocket engines. The components of the obtained torque can be independent variables. This circumstance makes it possible to develop a universal method for adjusting the total torque, which is suitable for controlling swivel steering units under any restrictions set on the torques included in the sum. The technique can be applied both at the design stage in developing a technical proposal, and in modifying existing designs in case operating conditions change. The method is based on the use of an eccentric bushing, which was only employed previously to compensate for thrust asymmetry. The design of a commercially manufactured steering unit is used as an example to show that the proposed control method is very simple and does not require significant and expensive layout changes. Based on the newly obtained analytical dependences, the optimal limit for the use of the bushing is established, which makes it possible to increase the friction torque of the unit as one of the components of the conventional sum without increasing its established threshold. The introduction of the new method of adjusting the torque characteristics enables a reduction in the procedure of adjusting production designs to the required values of the friction force torque. This option facilitates a decrease in the number of costly retests.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Rocket and propulsion systems research · Advanced Data Processing Techniques · Aerospace Engineering and Control Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Falaleev, S.V., Techniques for calculating the hydrodynamic characteristics of mechanical face seals with gaps of complex forms, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 177–183.10.3103/S1068366615020063 ↗
2. Wei, L., Zhang, P., Liu, Q., Jin, L., and Fang, G., Influencing factors analysis and experiments of friction coefficient between the end faces for contact mechanical seals, Mocaxue Xuebao, 2016, vol. 36, no. 3, pp. 354–361.
3. Balyakin, V.B., Lavrin, V.B., and Ossiala, V.B.A., Procedure to determine friction torque in a mechanical membrane contact seal, J. Frict. Wear, 2019, vol. 40, no. 1, pp. 46–50.10.3103/S1068366619010021 ↗
4. Yun, F., Wang, L., Yao, S., Liu, J., Liu, T., and Wang, R., Analytical and experimental study on sealing contact characteristics of subsea collet connectors, Adv. Mech. Eng., 2017, vol. 9, no. 4, pp. 1–14.
5. Korolev, A.A. and Korolev, A.V., Influence of geometrical parameters of the working surface of the bearing raceway on its operability, J. Frict. Wear, 2015, vol. 36, no. 2, pp. 189–192.10.3103/S1068366615020099 ↗
6. Korolev, A.A. and Korolev, A.V., Experimental study of the balls and raceways contact geometry effect on the rolling-friction torque, J. Frict. Wear, 2016, vol. 37, no. 2, pp. 119–123.10.3103/S1068366616020094 ↗
7. Balyakin, V.B., Zhilnikov, E.P., Kosenok, B.B., and Lavrin, A.V., Study of the influence of ring misalignment in rolling bearings on frictional torque and the fatigue life of support, J. Frict. Wear, 2017, vol. 38, no. 1, pp. 7–12.10.3103/S1068366616060027 ↗
8. Silayev, B.M. and Danilenko, P.A., Method of calculating high-speed rolling bearings intended for an aircraft engine based on considering the wear process, J. Frict. Wear, 2015, vol. 36, no. 4, pp. 350–354.10.3103/S1068366615040169 ↗
9. Zhil’nikov, E.P., Balyakin, V.B., and Lavrin, A.V., A method for calculating the frictional moment in cageless bearings, J. Frict. Wear, 2018, vol. 39, no. 5, pp. 400–404.10.3103/S1068366618050161 ↗