journal article·2020-09

Effect of Nanostructuring of Aluminum, Copper, and Alloys on Their Basis Wear for Resistance and Hardness

R. A. Apakashev, M. L. Khazin, S. A. Krasikov

Journal of Friction and Wear· Volume 41· Issue 5
Publisher page

Abstract

A comparative study of the wear resistance and hardness of samples of A1100 grade aluminum grade, C11000 grade copper, 518.0 aluminum–magnesium alloy, and C95200 bronze obtained by the metallurgical method without and with nanostructural processing has been studied. Wear resistance of samples of metals and alloys was determined on a four-ball friction machine equipped with a special friction unit. The hardness was tested using the Brinell method on a Zwick/Roell Z050 universal testing machine. Electron and atomic force microscopy were used to determine the type of structure of the samples. It is shown that nanostructuring of these non-ferrous metals and alloys has a significant impact on their resistance to friction wear and hardness. An increase in the wear resistance of samples by 11–28% with a corresponding increase in hardness by a value of 12–15% was found.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Bugaev, A.M., Improvement of service life of machines and mechanisms, Sovrem. Tendentsii Razvit. Nauki Tekhnol., 2016, no. 10, pp. 22–24.
2. Kosnikov, G.A. and El’darkhanov, A.S., Use of ultrasonic treatment of alloys in liquid and double-phase states in the production of nanostructured aluminum-matrix composites for general machine-building and special-purpose products with higher performance, Liteshchik Ross., 2013, no. 10, pp. 20–22.
3. Vityaz’, P.A., Senyut’, V.T., Kheifets, M.L., Borodavko, V.I., Sobol’, S.F., Kolmakov, A.G., and Klimenko, S.A., Synthesis of nanostructured gradient materials with controlled thermobaric treatment and modification, Aktual. Vopr. Mashinoved., 2016, no. 5, pp. 302–307.
4. Babak, V.P., Shchepetov, V.V., and Harchenko, S.D., Antifriction nanocomposite coatings that contain magnesium carbide, J. Frict. Wear, 2019, vol. 40, no. 6, pp. 593–598.10.3103/S1068366619060035 ↗
5. Fathy, A., Elkady, O., and Abu-Oqail, A., Microstructure, mechanical and wear properties of Cu–ZrO2 nanocomposites, Mater. Sci. Technol., 2017, vol. 33, no. 17, pp. 2138–2146.10.1080/02670836.2017.1353668 ↗
6. Mazahery, A. and Ostad Shabani, M., Study on microstructure and abrasive wear behavior of sintered Al matrix composites, Ceram. Int., 2012, vol. 38, no. 5, pp. 4263–4269.10.1016/j.ceramint.2012.02.008 ↗
7. Apakashev, R. and Valiev, N., The effect of directional flow of metallic melt on the structure of cast metal, Adv. Mater. Res., 2013, vol. 684, pp. 338–341.10.4028/www.scientific.net/AMR.684.338 ↗
8. Mashekov, S.A., Nugman, E.Z., Tusupkalieva, E.A., Mashenkova, A.S., and Maulenova, M.R., Impact fracture of nanostructured aluminum alloy AD31 after various of heat treatments and rolling in helical rolls, Sovrem. Naukoemkie Tekhnol., 2018, no. 4, pp. 97–102.
9. Al-Salihi, H.A., Mahmood, A.A., and Alalkawi, H.J., Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles, J. Nanocompos., 2019, vol. 5, no. 3, pp. 67–73.10.1080/20550324.2019.1637576 ↗
10. Chen, X., Han, Z., and Lu, K., Friction and wear reduction in copper with a gradient nano-grained surface layer, ACS Appl. Mater. Interfaces, 2018, vol. 10, no. 16, pp. 13 829–13 838.10.1021/acsami.8b01205 ↗