Wear Resistance of Nickel–Cobalt–Polytetrafluoroethylene Composite Electrolytic Coatings Deposited from Chloride-Containing Electrolyte
Source abstract
Abstract
The development and implementation of novel galvanic coatings with abnormally high microhardness, wear resistance, and corrosion resistance are the focus of modern machine-building. The galvanic deposition of composite electrolytic coatings (CECs) is an efficient method of improving their properties. In this paper, a chloride-containing electrolyte has been proposed for obtaining a wear-resistant nickel–cobalt–polytetrafluoroethylene CEC. The effect exerted by electrolysis modes and electrolyte compositions on some physicomechanical properties (wear resistance and corrosion resistance) of a nickel–cobalt–polytetrafluoroethylene composite electrolytic coating deposited from chloride-containing electrolyte has been studied. The potentialities of using the deposited layer as wear- and corrosion-resistant coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Borodin, I.N., Uprochnenie detalei kompozitsionnymi pokrytiyami (Hardening of Machine Parts by Composite Coatings), Moscow: Mashinostroenie, 1982.
2. Bykova, M.I., Shklyanaya, I.V., and Babak, E.A., Analysis of the working capacity of nickel composite coatings, Materialy zonal’noi nauchno-tekhnicheskoi konferentsii po elektrokhimicheskim metodam obrabotki i uprochneniyu rabochikh poverkhnostei detalei mashin, 14–17 oktyabrya 1976 g., Tezisy dokladov (Proc. Reg. Sci.-Tech. Conf. on Electrochemical Treatment and Hardening of Working Surfaces of Machine Parts, October 14–17, 1976, Abstracts of Papers), Tyumen, 1976, pp. 123–124.
3. Bykova, M.I., Shklyanaya, I.V., and Nastenko, N.Ya., Improvement of nickel coatings by inclusion of dispersed particles, Materialy respublikanskoi konferentsii po oborudovaniyu dlya naneseniya zashchitno-dekorativnykh i spetsial’nykh pokrytii, 15–18 sentyabrya 1975 g., Tezisy dokladov (Proc. Resp. conf. on Equipment for Coating of Protective-Decorative and Specific Coatings, September 15–18, 1975, Abstracts of Papers), Kiev: Kievsk. Politekh. Inst., 1975, pp. 5–6.
4. Guslienko, Yu.D. and Danilenko, V.A., Production of multicomponent combined coatings based on nickel and their properties, Materialy respublikanskoi konferentsii po oborudovaniyu dlya naneseniya zashchitnodekorativnykh i spetsial’nykh pokrytii, 15–18 sentyabrya 1975 g., Tezisy dokladov (Proc. Resp. conf. on Equipment for Coating of Protective-Decorative and Specific Coatings, September 15–18, 1975, Abstracts of Papers), Kiev: Kievsk. Politekh. Inst., 1975, p.9.
5. Fedorchenko, I.M., Guslienko, Yu.A., and Epik, A.P., Composite nickel-boron electrolytic coatings, Sov. Powder Metall. Met. Ceram., 1972, vol. 11, no. 8, pp. 626–628.10.1007/BF00800980 ↗
6. Nikitin, Yu.I., Pogorelyi, B.V., and Prudnikov, E.L., Production of diamond instruments on a galvanic bond, Sint. Almazy, 1975, no. 6, pp. 16–19.
7. Jelinek, T.W., Fortschrite in der Galvanotekchnik. Eine Auswertung der International Fachliteratur 2002–2003, Galvanotekchnik, 2004, vol. 97, no. 1, pp. 42–71.
8. Saifullin, R.S., Neorganicheskie kompozitsionnye materialy (Inorganic Composite Materials), Moscow: Khimiya, 1983.
9. Balakai, V.I., Electrodeposition of nickel, silver, and their alloys: technological, resources-saving, and ecological solutions, Doctoral (Tech.) Dissertation, Novocherkassk, 2004.
10. Shul’ga, G.I., Metodicheskie ukazaniya po kursu “Tekhnologiya mashinostroeniya” (Methodological Recommendations of Course of Lecturers “Machine Engineering Technology”), Novocherkassk: Novocherkassk. Politech. Inst., 1989.
11. Vyacheslavov, P.M., Elektrokhimicheskoe osazhdenie splavov (Electrochemical Deposition of Alloys), Leningrad: Mashinostroenie, 1971.