journal article·2015-05

Comparative studies of the character of destruction in 38Cr2Ni2MoA and 12Cr2Ni4A steel gearwheel teeth operated under extreme conditions

N. B. Pugacheva, E. B. Trushina, N. P. Antenorova, E. I. Pugacheva

Journal of Friction and Wear· Volume 36· Issue 3
Publisher page

Abstract

A comparative analysis of the character of destruction occurring in gearwheels that had been preliminary strengthened by high-frequency current quenching and cementation, in the process of their operation under heavy loading was performed. The microstructure of strengthened layers has been shown to be almost identical, despite the difference between the chemical compositions of the gearwheel steels and the methods used for their surface strengthening. The common mechanisms of surface destruction under operation, such as fatigue wear with the formation of pittings at its initial stage, and the formation of wear particles with further abrasive wear, have been established.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Engineering Diagnostics and Reliability · Material Properties and Failure Mechanisms · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Drozdov, Yu.N., Pavlov, V.G., and Puchkov, V.N., Trenie i iznos v ekstremal’nykh usloviyakh (Friction and Wear in Extremal Conditions), Moscow: Mashinostroenie, 1986.
2. Kragel’skii, I.V., Trenie I Iznos (Friction and Wear), Moscow: Mashinostroenie, 1968.
3. Aistov, I.P., Estimation of dynamic loadings acting in toothing of pinion pump of aviation destination, Izvestiya vuzov. Mashinostroenie, 2005, no. 2, pp. 23–27.
4. Borisenok, G.V., Vasil’ev, L.A., and Voroshnin, L.G., Khimiko-termicheskaya obrabotka metallov i splavov (Chemical and Heat Treatment of Metals and Alloys) Moscow: Metallurgiya, 1981.
5. Podgaevskii, O.L., Assessment of wear of active surfaces of face gear teeth with modified profile angles, Trenie Iznos, 2006, vol. 27, pp. 612–619.
6. Engel’, L. and Klingele, G., Rastrovaya elektronnaya mikroskopiya (Bit–Mapped Electronic Microscopy), Moscow: Metallurgiya, 1986.
7. Eliseev, Yu.S. and Nezhurin, I.P., Prevention of jamming in gearings, Tekhn. Mashinostr., 1998, no. 1, pp. 18–31.
8. Kharlamov, V.V. and Pavlyshko, S.V., Smeshannaya smazka v tyazhelonagruzhennykh tribosopryazheniyakh skol’zheniya (Mixed Lubrication in Hardly Loaded Sliding Tribojoints), Ekaterinburg: Ural. Otd. Ross. Akad. Nauk, 2003.
9. Pugacheva, N.B., Pavlyshko, S.V., Trushina, E.B., and Zamyatin, A.N., Investigation of mass transfer during tribological interaction of alloyed steels, J. Friction Wear, 2012, vol. 33, pp. 208–216.10.3103/S1068366612030099 ↗
10. Smirnov, A.N., Gerike, B.L., and Murav’ev, V.V., Diagnostirovanie tekhnicheskikh ustroistv opasnykh proizvodstvennykh ob"ektov (Diagnostics of Technical Devices of Dangerous Industrial Objects), Novosibirsk: Nauka, 2003.