journal article·2009-10

Numerical simulation of operation heat modes of multidisc oil-cooled vehicle brake. Part 1. Heat problem solution

V. P. Sergienko, M. Yu. Tseluev, A. V. Kupreev

Journal of Friction and Wear· Volume 30· Issue 5
Publisher page

Abstract

The paper considers the operating heat modes of multidisc oil-cooled vehicle brakes under single and multiple braking, as well as under deceleration over a long downgrade. The initially boundary-value heat problem for the given operating modes of the brake is formulated and solved by the finite-element method. The regularities of formation of nonstationary temperature fields both on the contact surfaces and in the bulk of the brake friction elements are obtained for preset braking modes. The dependences are obtained for the maximal contact surface temperature on the metal counterbody and frictional material vs. the load and velocity parameters of vehicle motion. A method for forecasting the critical operating regimes of multidisc oil-cooled brakes is proposed for the given operation conditions of the vehicle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Mechanical Systems and Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Chichinadze, A.V., Braun, E.D., Kozhemyakina, V.D., et al., The Way to Use the Thermodynamics Theory and Solids Friction and Wear Simulation for Design the Brakes of Aviation Wheels, Tren. Iznos, 2005, vol. 26, no. 3, pp. 261–268.
2. Chichinadze, A.V., Braun, E.D., Gekker, F.R., et al., Information Aspects of Thermodynamics and Friction and Friction Pairs Simulation to Estimate the Operating Performances of Loaded Brake Devices at the Stage of a Project, Tren. Iznos, 2000, vol. 21, no. 4, pp. 393–400.
3. Balakin, V.A., Sergienko, V.P., Zabolotskii, M.M., et al., Heat Calculation of Multi-Dicks Brake Cooled by Oil, Tren. Iznos, 2004, vol. 25, no. 6, pp. 585–592.
4. Choi, J.-H. and Lee, I., Finite Element Analysis of Transient Thermoelastic Behaviors in Disk Brakes, Wear, 2004, vol. 257, nos. 1–2, pp. 47–58.10.1016/j.wear.2003.07.008 ↗
5. Wawrzonek, L. and Bialecki, R.A., Temperature in a Disk Brake, Simulation and Experimental Verification, Int. J. Numer. Methods Heat Fluid Flow, 2008, vol. 18, nos. 3–4, pp. 387–400.10.1108/09615530810853646 ↗
6. Balakin, V.A. and Sergienko, V.P., Teplovye raschety tormozov i uzlov treniya (Heat Calculations of Brakes and Friction Units), Gomel: IMMS NANB, 1999.
7. Lykov, A.V., Teoriya teploprovodnosti (The Theory of Heat Conductivity), Moscow: Vysshaya shkola, 1967.
8. Kozdoba, L.A., Metody resheniya nelineinykh zadach teploprovodnosti (The Ways to Solve the Nonlinear Problems of Heat Conductivity), Moscow: Nauka, 1975.
9. Samarskii, A.A. and Vabishchev, P.N., Vychislitel’naya teploperedacha (Computational Heat Transfer), Moscow: Editorial URSS, 2003.
10. Bathe, K.-J., Finite Element Procedures, New Jersey: Prentice-Hall, Inc., 1996.
11. Popov, V.I., Teploobmen v zone kontakta raz″emnykh i neraz″emnykh soedinenii (Heat Exchange in Contact Area of Detachable and Permanent Connections), Moscow: Energiya, 1971.
12. Shlykov, Yu.P., Ganin, E.A., and Tsarevskii, S.N., Kontaktnoe termicheskoe soprotivlenie (Contact Thermal Resistance), Moscow: Energiya, 1977.
13. Wong, H.Y., Handbook of Essential Formulae and Data on Heat Transfer for Engineers, London, New York: Longman, 1977.
14. Brodskii, V.Z., Vvedenie v faktornoe planirovanie eksperimenta (Introduction into Factor Experimental Design), Moscow: Nauka, 1976.